Gregory Nutt 7a745c3fa4 Use common macro(s) for calculating link layer header length. From Brennan Ashton.		2015-04-13 13:53:13 -06:00
..
Kconfig	…
Make.defs	Networking: Add logic to search the Neighbor Table and update the destination address in the output Ethernet header OR to send an ICMPv6 Neighbor Solicitation if there is no entry in the Neighbor table for the IPv6 address	2015-01-20 14:37:02 -06:00
neighbor.h	Networking: Divide net_intiialize() into net_setup() and net_initialize() to solve a chicken-and-egg problem. net_setup() must be caleld before up_initialize() is called so that networking data structures are ready to register new network devices.	2015-02-14 06:36:53 -06:00
neighbor_add.c	Networking: Change some debug outputto vebose debug output	2015-01-21 14:23:50 -06:00
neighbor_findentry.c	ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation).	2015-02-02 13:44:31 -06:00
neighbor_initialize.c	Stray semicolon caused compile failure when IPv6 enabled	2015-02-14 09:30:22 -06:00
neighbor_lookup.c	ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation).	2015-02-02 13:44:31 -06:00
neighbor_out.c	Use common macro(s) for calculating link layer header length. From Brennan Ashton.	2015-04-13 13:53:13 -06:00
neighbor_periodic.c	…
neighbor_update.c	ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation).	2015-02-02 13:44:31 -06:00