incubator-nuttx/include/nuttx/fs/ioctl.h

686 lines
30 KiB
C

/****************************************************************************
* include/nuttx/fs/ioctl.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_FS_IOCTL_H
#define __INCLUDE_NUTTX_FS_IOCTL_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* General ioctl definitions ************************************************/
/* Each NuttX ioctl commands are uint16_t's consisting of an 8-bit type
* identifier and an 8-bit command number. All command type identifiers are
* defined below:
*/
#define _TIOCBASE (0x0100) /* Terminal I/O ioctl commands */
#define _WDIOCBASE (0x0200) /* Watchdog driver ioctl commands */
#define _FIOCBASE (0x0300) /* File system ioctl commands */
#define _DIOCBASE (0x0400) /* Character driver ioctl commands */
#define _BIOCBASE (0x0500) /* Block driver ioctl commands */
#define _MTDIOCBASE (0x0600) /* MTD ioctl commands */
#define _SIOCBASE (0x0700) /* Socket ioctl commands */
#define _ARPIOCBASE (0x0800) /* ARP ioctl commands */
#define _TSIOCBASE (0x0900) /* Touchscreen ioctl commands */
#define _SNIOCBASE (0x0a00) /* Sensor ioctl commands */
#define _ANIOCBASE (0x0b00) /* Analog (DAC/ADC) ioctl commands */
#define _PWMIOCBASE (0x0c00) /* PWM ioctl commands */
#define _CAIOCBASE (0x0d00) /* CDC/ACM ioctl commands */
#define _BATIOCBASE (0x0e00) /* Battery driver ioctl commands */
#define _QEIOCBASE (0x0f00) /* Quadrature encoder ioctl commands */
#define _AUDIOIOCBASE (0x1000) /* Audio ioctl commands */
#define _LCDIOCBASE (0x1100) /* LCD character driver ioctl commands */
#define _SLCDIOCBASE (0x1200) /* Segment LCD ioctl commands */
#define _CAPIOCBASE (0x1300) /* Capture ioctl commands */
#define _WLCIOCBASE (0x1400) /* Wireless modules ioctl character driver commands */
#define _CFGDIOCBASE (0x1500) /* Config Data device (app config) ioctl commands */
#define _TCIOCBASE (0x1600) /* Timer ioctl commands */
#define _JOYBASE (0x1700) /* Joystick ioctl commands */
#define _PIPEBASE (0x1800) /* FIFO/pipe ioctl commands */
#define _RTCBASE (0x1900) /* RTC ioctl commands */
#define _RELAYBASE (0x1a00) /* Relay devices ioctl commands */
#define _CANBASE (0x1b00) /* CAN ioctl commands */
#define _BTNBASE (0x1c00) /* Button ioctl commands */
#define _ULEDBASE (0x1d00) /* User LED ioctl commands */
#define _ZCBASE (0x1e00) /* Zero Cross ioctl commands */
#define _LOOPBASE (0x1f00) /* Loop device commands */
#define _MODEMBASE (0x2000) /* Modem ioctl commands */
#define _I2CBASE (0x2100) /* I2C driver commands */
#define _SPIBASE (0x2200) /* SPI driver commands */
#define _GPIOBASE (0x2300) /* GPIO driver commands */
#define _CLIOCBASE (0x2400) /* Contactless modules ioctl commands */
#define _USBCBASE (0x2500) /* USB-C controller ioctl commands */
#define _MAC802154BASE (0x2600) /* 802.15.4 MAC ioctl commands */
#define _PWRBASE (0x2700) /* Power-related ioctl commands */
#define _FBIOCBASE (0x2800) /* Frame buffer character driver ioctl commands */
#define _NXTERMBASE (0x2900) /* NxTerm character driver ioctl commands */
#define _RFIOCBASE (0x2a00) /* RF devices ioctl commands */
#define _RPTUNBASE (0x2b00) /* Remote processor tunnel ioctl commands */
#define _NOTECTLBASE (0x2c00) /* Note filter control ioctl commands*/
#define _NOTERAMBASE (0x2d00) /* Noteram device ioctl commands*/
#define _RCIOCBASE (0x2e00) /* Remote Control device ioctl commands */
#define _HIMEMBASE (0x2f00) /* Himem device ioctl commands */
#define _EFUSEBASE (0x3000) /* Efuse device ioctl commands */
#define _MTRIOBASE (0x3100) /* Motor device ioctl commands */
#define _MATHIOBASE (0x3200) /* MATH device ioctl commands */
#define _MMCSDIOBASE (0x3300) /* MMCSD device ioctl commands */
#define _BLUETOOTHBASE (0x3400) /* Bluetooth ioctl commands */
#define _PKTRADIOBASE (0x3500) /* Packet radio ioctl commands */
#define _LTEBASE (0x3600) /* LTE device ioctl commands */
#define _VIDIOCBASE (0x3700) /* Video device ioctl commands */
#define _CELLIOCBASE (0x3800) /* Cellular device ioctl commands */
#define _MIPIDSIBASE (0x3900) /* Mipidsi device ioctl commands */
#define _SYSLOGBASE (0x3c00) /* Syslog device ioctl commands */
#define _WLIOCBASE (0x8b00) /* Wireless modules ioctl network commands */
/* boardctl() commands share the same number space */
#define _BOARDBASE (0xff00) /* boardctl commands */
/* Macros used to manage ioctl commands. IOCTL commands are divided into
* groups of 256 commands for major, broad functional areas. That makes
* them a limited resource.
*/
#define _IOC_MASK (0x00ff)
#define _IOC_TYPE(cmd) ((cmd) & ~_IOC_MASK)
#define _IOC_NR(cmd) ((cmd) & _IOC_MASK)
#define _IOC(type,nr) ((type)|(nr))
/* Terminal I/O ioctl commands **********************************************/
#define _TIOCVALID(c) (_IOC_TYPE(c)==_TIOCBASE)
#define _TIOC(nr) _IOC(_TIOCBASE,nr)
/* Terminal I/O IOCTL definitions are retained in tioctl.h */
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/serial/tioctl.h>
/* Watchdog driver ioctl commands *******************************************/
#define _WDIOCVALID(c) (_IOC_TYPE(c)==_WDIOCBASE)
#define _WDIOC(nr) _IOC(_WDIOCBASE,nr)
/* NuttX file system ioctl definitions **************************************/
#define _FIOCVALID(c) (_IOC_TYPE(c)==_FIOCBASE)
#define _FIOC(nr) _IOC(_FIOCBASE,nr)
#define FIOC_REFORMAT _FIOC(0x0001) /* IN: None
* OUT: None
*/
#define FIOC_OPTIMIZE _FIOC(0x0002) /* IN: The number of bytes to recover
* (ignored on most file systems)
* OUT: None
*/
#define FIOC_FILEPATH _FIOC(0x0003) /* IN: FAR char *(length >= PATH_MAX)
* OUT: The full file path
*/
#define FIOC_INTEGRITY _FIOC(0x0004) /* Run a consistency check on the
* file system media.
* IN: None
* OUT: None
*/
#define FIOC_DUMP _FIOC(0x0005) /* Dump logical content of media.
* IN: None
* OUT: None
*/
#define FIONREAD _FIOC(0x0006) /* IN: Location to return value (int *)
* OUT: Bytes readable from this fd
*/
#define FIONWRITE _FIOC(0x0007) /* IN: Location to return value (int *)
* OUT: Number bytes in send queue
*/
#define FIONSPACE _FIOC(0x0008) /* IN: Location to return value (int *)
* OUT: Free space in send queue.
*/
#define FIONUSERFS _FIOC(0x0009) /* IN: Pointer to struct usefs_config_s
* holding userfs configuration.
* OUT: Instance number is returned on
* success.
*/
#define FIONBIO _FIOC(0x000a) /* IN: Boolean option takes an
* int value.
* OUT: Origin option.
*/
#define FIOCLEX _FIOC(0x000b) /* IN: None
* OUT: None
*/
#define FIONCLEX _FIOC(0x000c) /* IN: None
* OUT: None
*/
#define FIOC_NOTIFY _FIOC(0x000d) /* IN: Pointer to struct automount_notify_s
* holding automount notification
* configuration
* OUT: None
*/
#ifdef CONFIG_FDSAN
#define FIOC_SETTAG _FIOC(0x000e) /* IN: FAR uint64_t *
* Pointer to file tag
* OUT: None
*/
#define FIOC_GETTAG _FIOC(0x000f) /* IN: FAR uint64_t *
* Pointer to file tag
* OUT: None
*/
#endif
/* NuttX file system ioctl definitions **************************************/
#define _DIOCVALID(c) (_IOC_TYPE(c)==_DIOCBASE)
#define _DIOC(nr) _IOC(_DIOCBASE,nr)
#define DIOC_GETPRIV _DIOC(0x0001) /* IN: Location to return handle (void **)
* OUT: Reference to internal data
* structure. May have a reference
* incremented.
*/
#define DIOC_RELPRIV _DIOC(0x0003) /* IN: None
* OUT: None, reference obtained by
* FIOC_GETPRIV released.
*/
#define DIOC_SETKEY _DIOC(0X0004) /* IN: Encryption key
* OUT: None
*/
/* NuttX block driver ioctl definitions *************************************/
#define _BIOCVALID(c) (_IOC_TYPE(c)==_BIOCBASE)
#define _BIOC(nr) _IOC(_BIOCBASE,nr)
#define BIOC_XIPBASE _BIOC(0x0001) /* Perform mapping to random access memory.
* IN: Pointer to pointer to void in
* which to received the XIP base.
* OUT: If media is directly accessible,
* return (void *) base address
* of device memory */
#define BIOC_PROBE _BIOC(0x0002) /* Re-probe and interface; check for media
* in the slot
* IN: None
* OUT: None (ioctl return value provides
* success/failure indication). */
#define BIOC_EJECT _BIOC(0x0003) /* Eject/disable media in the slot
* IN: None
* OUT: None (ioctl return value provides
* success/failure indication). */
#define BIOC_LLFORMAT _BIOC(0x0004) /* Low-Level Format on SMART flash devices
* IN: None
* OUT: None (ioctl return value provides
* success/failure indication). */
#define BIOC_GETFORMAT _BIOC(0x0005) /* Returns SMART flash format information
* such as format status, logical sector
* size, total sectors, free sectors, etc.
* IN: None
* OUT: Pointer to the format information. */
#define BIOC_ALLOCSECT _BIOC(0x0006) /* Allocate a logical sector from the block
* device.
* IN: None
* OUT: Logical sector number allocated. */
#define BIOC_FREESECT _BIOC(0x0007) /* Allocate a logical sector from the block
* device.
* IN: None
* OUT: Logical sector number allocated. */
#define BIOC_READSECT _BIOC(0x0008) /* Read a logical sector from the block
* device.
* IN: Pointer to sector read data (the
* logical sector number, count and
* read buffer address
* OUT: Number of bytes read or error */
#define BIOC_WRITESECT _BIOC(0x0009) /* Write to data to a logical sector
* IN: Pointer to sector write data (the
* logical sector number and write
* buffer address
* OUT: None (ioctl return value provides
* success/failure indication). */
#define BIOC_GETPROCFSD _BIOC(0x000a) /* Get ProcFS data specific to the
* block device.
* IN: Pointer to a struct defined for
* the block to load with it's
* ProcFS data.
* OUT: None (ioctl return value provides
* success/failure indication). */
#define BIOC_DEBUGCMD _BIOC(0x000b) /* Send driver specific debug command /
* data to the block device.
* IN: Pointer to a struct defined for
* the block with specific debug
* command and data.
* OUT: None. */
#define BIOC_GEOMETRY _BIOC(0x000c) /* Used only by BCH to return the
* geometry of the contained block
* driver.
* IN: Pointer to writable instance
* of struct geometry in which
* to return geometry.
* OUT: Data return in user-provided
* buffer. */
#define BIOC_FLUSH _BIOC(0x000d) /* Flush the block device write buffer
* IN: None
* OUT: None (ioctl return value provides
* success/failure indication). */
#define BIOC_PARTINFO _BIOC(0x000e) /* Retrieve partition information from the
* block device.
* IN: Pointer to writable struct
* partition_info_s in which to
* receive partition information data
* OUT: Partition information structure
* populated with data from the block
* device partition */
#define BIOC_BLKSSZGET _BIOC(0x000f) /* Get block device sector size.
* IN: Pointer to writable instance
* of sector size in which
* to return sector size.
* OUT: Data return in user-provided
* buffer. */
/* NuttX MTD driver ioctl definitions ***************************************/
#define _MTDIOCVALID(c) (_IOC_TYPE(c)==_MTDIOCBASE)
#define _MTDIOC(nr) _IOC(_MTDIOCBASE,nr)
/* Socket IOCTLs ************************************************************/
/* See include/nuttx/net/ioctl.h */
#define _SIOCVALID(c) (_IOC_TYPE(c)==_SIOCBASE)
#define _SIOC(nr) _IOC(_SIOCBASE,nr)
/* NuttX ARP driver ioctl definitions (see netinet/arp.h) *******************/
#define _ARPIOCVALID(c) (_IOC_TYPE(c)==_ARPIOCBASE)
#define _ARPIOC(nr) _IOC(_ARPIOCBASE,nr)
/* NuttX touchscreen ioctl definitions (see nuttx/input/touchscreen.h) ******/
#define _TSIOCVALID(c) (_IOC_TYPE(c)==_TSIOCBASE)
#define _TSIOC(nr) _IOC(_TSIOCBASE,nr)
/* NuttX sensor ioctl definitions (see nuttx/sensor/ioctl.h) ****************/
#define _SNIOCVALID(c) (_IOC_TYPE(c)==_SNIOCBASE)
#define _SNIOC(nr) _IOC(_SNIOCBASE,nr)
/* NuttX Analog (DAC/ADC) ioctl commands (see nuttx/analog/ioctl.h **********/
#define _ANIOCVALID(c) (_IOC_TYPE(c)==_ANIOCBASE)
#define _ANIOC(nr) _IOC(_ANIOCBASE,nr)
/* NuttX PWM ioctl definitions (see nuttx/timers/pwm.h) *********************/
#define _PWMIOCVALID(c) (_IOC_TYPE(c)==_PWMIOCBASE)
#define _PWMIOC(nr) _IOC(_PWMIOCBASE,nr)
/* NuttX Capture ioctl definitions (see nuttx/timers/capture.h) *************/
#define _CAPIOCVALID(c) (_IOC_TYPE(c)==_CAPIOCBASE)
#define _CAPIOC(nr) _IOC(_CAPIOCBASE,nr)
/* NuttX USB CDC/ACM serial driver ioctl definitions ************************/
/* (see nuttx/usb/cdcacm.h) */
#define _CAIOCVALID(c) (_IOC_TYPE(c)==_CAIOCBASE)
#define _CAIOC(nr) _IOC(_CAIOCBASE,nr)
/* NuttX battery driver ioctl definitions ***********************************/
/* (see nuttx/power/battery.h) */
#define _BATIOCVALID(c) (_IOC_TYPE(c)==_BATIOCBASE)
#define _BATIOC(nr) _IOC(_BATIOCBASE,nr)
/* NuttX Quadrature Encoder driver ioctl definitions ************************/
/* (see nuttx/power/battery.h) */
#define _QEIOCVALID(c) (_IOC_TYPE(c)==_QEIOCBASE)
#define _QEIOC(nr) _IOC(_QEIOCBASE,nr)
/* NuttX Audio driver ioctl definitions *************************************/
/* (see nuttx/audio/audio.h) */
#define _AUDIOIOCVALID(c) (_IOC_TYPE(c)==_AUDIOIOCBASE)
#define _AUDIOIOC(nr) _IOC(_AUDIOIOCBASE,nr)
/* LCD character driver ioctl definitions ***********************************/
/* (see nuttx/include/lcd/slcd_codec.h */
#define _LCDIOCVALID(c) (_IOC_TYPE(c)==_LCDIOCBASE)
#define _LCDIOC(nr) _IOC(_LCDIOCBASE,nr)
/* Segment LCD driver ioctl definitions *************************************/
/* (see nuttx/include/lcd/slcd_codec.h */
#define _SLCDIOCVALID(c) (_IOC_TYPE(c)==_SLCDIOCBASE)
#define _SLCDIOC(nr) _IOC(_SLCDIOCBASE,nr)
/* Wireless driver character driver ioctl definitions ***********************/
/* (see nuttx/include/wireless/ioctl.h */
#define _WLCIOCVALID(c) (_IOC_TYPE(c)==_WLCIOCBASE)
#define _WLCIOC(nr) _IOC(_WLCIOCBASE,nr)
/* Application Config Data driver ioctl definitions *************************/
/* (see nuttx/include/configdata.h */
#define _CFGDIOCVALID(c) (_IOC_TYPE(c)==_CFGDIOCBASE)
#define _CFGDIOC(nr) _IOC(_CFGDIOCBASE,nr)
/* Timer driver ioctl commands **********************************************/
/* (see nuttx/include/timer.h */
#define _TCIOCVALID(c) (_IOC_TYPE(c)==_TCIOCBASE)
#define _TCIOC(nr) _IOC(_TCIOCBASE,nr)
/* Joystick driver ioctl definitions ****************************************/
/* Discrete Joystick (see nuttx/include/input/djoystick.h */
#define _JOYIOCVALID(c) (_IOC_TYPE(c)==_JOYBASE)
#define _JOYIOC(nr) _IOC(_JOYBASE,nr)
/* FIFOs and pipe driver ioctl definitions **********************************/
#define _PIPEIOCVALID(c) (_IOC_TYPE(c)==_PIPEBASE)
#define _PIPEIOC(nr) _IOC(_PIPEBASE,nr)
#define PIPEIOC_POLICY _PIPEIOC(0x0001) /* Set buffer policy
* IN: unsigned long integer
* 0=free on last close
* (default)
* 1=fre when empty
* OUT: None */
#define PIPEIOC_POLLINTHRD _PIPEIOC(0x0002) /* Set pipe POLLIN
* notifty buffer threshold.
* IN: unsigned long integer.
* POLLIN only occurs when
* buffer contains more
* bytes than the
* threshold.
* OUT: None */
#define PIPEIOC_POLLOUTTHRD _PIPEIOC(0x0003) /* Set pipe POLLOUT
* notifty buffer threshold.
* IN: unsigned long integer.
* POLLOUT only occurs
* when buffer can accept
* more bytes than
* threshold.
* OUT: None */
/* RTC driver ioctl definitions *********************************************/
/* (see nuttx/include/rtc.h */
#define _RTCIOCVALID(c) (_IOC_TYPE(c)==_RTCBASE)
#define _RTCIOC(nr) _IOC(_RTCBASE,nr)
/* Relay driver ioctl definitions *******************************************/
/* (see nuttx/power/relay.h */
#define _RELAYIOCVALID(c) (_IOC_TYPE(c)==_RELAYBASE)
#define _RELAYIOC(nr) _IOC(_RELAYBASE,nr)
/* CAN driver ioctl definitions *********************************************/
/* (see nuttx/can/can.h */
#define _CANIOCVALID(c) (_IOC_TYPE(c)==_CANBASE)
#define _CANIOC(nr) _IOC(_CANBASE,nr)
/* Button driver ioctl definitions ******************************************/
/* (see nuttx/input/buttons.h */
#define _BTNIOCVALID(c) (_IOC_TYPE(c)==_BTNBASE)
#define _BTNIOC(nr) _IOC(_BTNBASE,nr)
/* User LED driver ioctl definitions ****************************************/
/* (see nuttx/leds/usersled.h */
#define _ULEDIOCVALID(c) (_IOC_TYPE(c)==_ULEDBASE)
#define _ULEDIOC(nr) _IOC(_ULEDBASE,nr)
/* Zero Cross driver ioctl definitions **************************************/
/* (see nuttx/include/sensor/zerocross.h */
#define _ZCIOCVALID(c) (_IOC_TYPE(c)==_ZCBASE)
#define _ZCIOC(nr) _IOC(_ZCBASE,nr)
/* Loop driver ioctl definitions ********************************************/
/* (see nuttx/include/fs/loop.h */
#define _LOOPIOCVALID(c) (_IOC_TYPE(c)==_LOOPBASE)
#define _LOOPIOC(nr) _IOC(_LOOPBASE,nr)
/* Modem driver ioctl definitions *******************************************/
/* see nuttx/include/modem/ioctl.h */
#define _MODEMIOCVALID(c) (_IOC_TYPE(c)==_MODEMBASE)
#define _MODEMIOC(nr) _IOC(_MODEMBASE,nr)
/* I2C driver ioctl definitions *********************************************/
/* see nuttx/include/i2c/i2c_master.h */
#define _I2CIOCVALID(c) (_IOC_TYPE(c)==_I2CBASE)
#define _I2CIOC(nr) _IOC(_I2CBASE,nr)
/* SPI driver ioctl definitions *********************************************/
/* see nuttx/include/spi/spi_transfer.h */
#define _SPIIOCVALID(c) (_IOC_TYPE(c)==_SPIBASE)
#define _SPIIOC(nr) _IOC(_SPIBASE,nr)
/* GPIO driver command definitions ******************************************/
/* see nuttx/include/ioexpander/gpio.h */
#define _GPIOCVALID(c) (_IOC_TYPE(c)==_GPIOBASE)
#define _GPIOC(nr) _IOC(_GPIOBASE,nr)
/* Contactless driver ioctl definitions *************************************/
/* (see nuttx/include/contactless/ioctl.h */
#define _CLIOCVALID(c) (_IOC_TYPE(c)==_CLIOCBASE)
#define _CLIOC(nr) _IOC(_CLIOCBASE,nr)
/* USB-C controller driver ioctl definitions ********************************/
/* (see nuttx/include/usb/xxx.h */
#define _USBCIOCVALID(c) (_IOC_TYPE(c)==_USBCBASE)
#define _USBCIOC(nr) _IOC(_USBCBASE,nr)
/* 802.15.4 MAC driver ioctl definitions ************************************/
/* (see nuttx/include/wireless/ieee802154/ieee802154_mac.h */
#define _MAC802154IOCVALID(c) (_IOC_TYPE(c)==_MAC802154BASE)
#define _MAC802154IOC(nr) _IOC(_MAC802154BASE,nr)
/* Power-Related IOCTLs *****************************************************/
#define _PWRIOCVALID(c) (_IOC_TYPE(c)==_PWRBASE)
#define _PWRIOC(nr) _IOC(_PWRBASE,nr)
/* Frame buffer character drivers *******************************************/
#define _FBIOCVALID(c) (_IOC_TYPE(c)==_FBIOCBASE)
#define _FBIOC(nr) _IOC(_FBIOCBASE,nr)
/* NxTerm character drivers *************************************************/
#define _NXTERMVALID(c) (_IOC_TYPE(c)==_NXTERMBASE)
#define _NXTERMIOC(nr) _IOC(_NXTERMBASE,nr)
/* NuttX RF ioctl definitions (see nuttx/rf/ioctl.h) ************************/
#define _RFIOCVALID(c) (_IOC_TYPE(c)==_RFIOCBASE)
#define _RFIOC(nr) _IOC(_RFIOCBASE,nr)
/* Rptun drivers ************************************************************/
#define _RPTUNIOCVALID(c) (_IOC_TYPE(c)==_RPTUNBASE)
#define _RPTUNIOC(nr) _IOC(_RPTUNBASE,nr)
/* Notectl drivers **********************************************************/
#define _NOTECTLIOCVALID(c) (_IOC_TYPE(c) == _NOTECTLBASE)
#define _NOTECTLIOC(nr) _IOC(_NOTECTLBASE, nr)
/* Noteram drivers **********************************************************/
#define _NOTERAMIOCVALID(c) (_IOC_TYPE(c) == _NOTERAMBASE)
#define _NOTERAMIOC(nr) _IOC(_NOTERAMBASE, nr)
/* Remote Control drivers ***************************************************/
#define _RCIOCVALID(c) (_IOC_TYPE(c)==_RCIOCBASE)
#define _RCIOC(nr) _IOC(_RCIOCBASE,nr)
/* Hime drivers *************************************************************/
#define _HIMEMIOCVALID(c) (_IOC_TYPE(c) == _HIMEMBASE)
#define _HIMEMIOC(nr) _IOC(_HIMEMBASE, nr)
/* Efuse drivers ************************************************************/
#define _EFUSEIOCVALID(c) (_IOC_TYPE(c) == _EFUSEBASE)
#define _EFUSEIOC(nr) _IOC(_EFUSEBASE, nr)
/* Motor drivers ************************************************************/
#define _MTRIOCVALID(c) (_IOC_TYPE(c) == _MTRIOBASE)
#define _MTRIOC(nr) _IOC(_MTRIOBASE, nr)
/* MATH drivers *************************************************************/
#define _MATHIOCVALID(c) (_IOC_TYPE(c) == _MATHIOBASE)
#define _MATHIOC(nr) _IOC(_MATHIOBASE, nr)
/* MMCSD drivers ************************************************************/
#define _MMCSDIOCVALID(c) (_IOC_TYPE(c) == _MMCSDIOBASE)
#define _MMCSDIOC(nr) _IOC(_MMCSDIOBASE, nr)
/* Bluetooth ioctl definitions **********************************************/
#define _BLUETOOTHIOCVALID(c) (_IOC_TYPE(c)==_BLUETOOTHBASE)
#define _BLUETOOTHIOC(nr) _IOC(_BLUETOOTHBASE,nr)
/* Packet radio ioctl definitions *******************************************/
#define _PKRADIOIOCVALID(c) (_IOC_TYPE(c)==_PKTRADIOBASE)
#define _PKRADIOIOC(nr) _IOC(_PKTRADIOBASE,nr)
/* LTE device ioctl definitions *********************************************/
#define _LTEIOCVALID(c) (_IOC_TYPE(c)==_LTEBASE)
#define _LTEIOC(nr) _IOC(_LTEBASE,nr)
/* Video device ioctl definitions *******************************************/
#define _VIDIOCVALID(c) (_IOC_TYPE(c)==_VIDIOCBASE)
#define _VIDIOC(nr) _IOC(_VIDIOCBASE,nr)
/* cellularctl() command definitions ****************************************/
#define _CELLIOCVALID(c) (_IOC_TYPE(c)==_CELLIOCBASE)
#define _CELLIOC(nr) _IOC(_CELLIOCBASE,nr)
/* mipidsi driver ioctl definitions *****************************************/
#define _MIPIDSIIOCVALID(c) (_IOC_TYPE(c)==_MIPIDSIBASE)
#define _MIPIDSIIOC(nr) _IOC(_MIPIDSIBASE,nr)
/* syslog driver ioctl definitions ******************************************/
#define _SYSLOGVALID(c) (_IOC_TYPE(c)==_SYSLOGBASE)
#define _SYSLOGIOC(nr) _IOC(_SYSLOGBASE,nr)
/* Wireless driver network ioctl definitions ********************************/
/* (see nuttx/include/wireless/wireless.h */
#define _WLIOCVALID(c) (_IOC_TYPE(c)==_WLIOCBASE)
#define _WLIOC(nr) _IOC(_WLIOCBASE,nr)
/* boardctl() command definitions *******************************************/
#define _BOARDIOCVALID(c) (_IOC_TYPE(c)==_BOARDBASE)
#define _BOARDIOC(nr) _IOC(_BOARDBASE,nr)
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __INCLUDE_NUTTX_FS_IOCTL_H */