incubator-nuttx/include/nuttx/timers/cs2100-cp.h

236 lines
10 KiB
C

/****************************************************************************
* include/nuttx/timers/cs2100-cp.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_TIMERS_CS2100_CP_H
#define __INCLUDE_NUTTX_TIMERS_CS2100_CP_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <nuttx/i2c/i2c_master.h>
#ifdef CONFIG_TIMERS_CS2100CP
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_I2C
# error I2C driver support is required (CONFIG_I2C)
#endif
#ifndef CONFIG_TIMERS_CS2100CP_CLKINBW
# define CONFIG_TIMERS_CS2100CP_CLKINBW 16
#endif
#ifndef CONFIG_DEBUG_FEATURES
# undef CONFIG_CS2100CP_DEBUG
# undef CONFIG_CS2100CP_REGDEBUG
#endif
/* Register Addresses *******************************************************/
#define CS2100_DEVID 0x01 /* Device ID and Revision */
#define CS2100_DEVCTL 0x02 /* Device Control */
#define CS2100_DEVCFG1 0x03 /* Device Configuration 1 */
#define CS2100_GBLCFG 0x05 /* Global Configuration */
#define CS2100_RATIO0 0x06 /* Ratio: Bits 24-31 */
#define CS2100_RATIO1 0x07 /* Ratio: Bits 16-23 */
#define CS2100_RATIO2 0x08 /* Ratio: Bits 8-15 */
#define CS2100_RATIO3 0x09 /* Ratio: Bits 0- 7 */
#define CS2100_FNCCFG1 0x16 /* Function Configuration 1 */
#define CS2100_FNCCFG2 0x17 /* Function Configuration 2 */
#define CS2100_FNCCFG3 0x1e /* Function Configuration 3 */
/* Register Bit Field Definitions *******************************************/
/* Device ID and Revision */
#define CS2100_DEVID_REVISION_SHIFT (0) /* Bits 0-2: Device REVISION */
#define CS2100_DEVID_REVISION_MASK (7 << CS2100_DEVID_REVISION_SHIFT)
#define CS2100_DEVID_DEVICE_SHIFT (3) /* Bits 3-7: Device ID */
#define CS2100_DEVID_DEVICE_MASK (31 << CS2100_DEVID_DEVICE_SHIFT)
# define CS2100_DEVID_DEVICE (0 << CS2100_DEVID_DEVICE_SHIFT)
/* Device Control */
#define CS2100_DEVCTL_CLKOUTDIS (1 << 0) /* Bit 0: CLK_OUT disable */
#define CS2100_DEVCTL_AUXOUTDIS (1 << 1) /* Bit 1: AUX_OUT disable */
#define CS2100_DEVCTL_UNLOCK (1 << 7) /* Bit 7: Unlock PLL */
/* Device Configuration 1 */
#define CS2100_DEVCFG1_ENDEVCFG1 (1 << 0) /* Bit 0: Enable 1 */
#define CS2100_DEVCFG1_AUXOUTSRC_SHIFT (1) /* Bits 1-2: Source of AUX_OUT signal */
#define CS2100_DEVCFG1_AUXOUTSRC_MASK (3 << CS2100_DEVCFG1_AUXOUTSRC_SHIFT)
# define CS2100_DEVCFG1_AUXOUTSRC_REFCLK (0 << CS2100_DEVCFG1_AUXOUTSRC_SHIFT) /* RefClk */
# define CS2100_DEVCFG1_AUXOUTSRC_CLKIN (1 << CS2100_DEVCFG1_AUXOUTSRC_SHIFT) /* CLK_IN */
# define CS2100_DEVCFG1_AUXOUTSRC_CLKOUT (2 << CS2100_DEVCFG1_AUXOUTSRC_SHIFT) /* CLK_OUT */
# define CS2100_DEVCFG1_AUXOUTSRC_PLLLOCK (3 << CS2100_DEVCFG1_AUXOUTSRC_SHIFT) /* PLL Lock Status Indicator*/
#define CS2100_DEVCFG1_RMODSEL_SHIFT (5) /* Bit 5-7: Selects R-Mod value */
#define CS2100_DEVCFG1_RMODSEL_MASK (7 << CS2100_DEVCFG1_RMODSEL_SHIFT)
# define CS2100_DEVCFG1_RMODSEL_NONE (0 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Left-shift R-value by 0 (x 1) */
# define CS2100_DEVCFG1_RMODSEL_MUL2 (1 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Left-shift R-value by 1 (x 2) */
# define CS2100_DEVCFG1_RMODSEL_MUL4 (2 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Left-shift R-value by 2 (x 4) */
# define CS2100_DEVCFG1_RMODSEL_MUL8 (3 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Left-shift R-value by 3 (x 8) */
# define CS2100_DEVCFG1_RMODSEL_DIV2 (4 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Right-shift R-value by 1 (÷ 2) */
# define CS2100_DEVCFG1_RMODSEL_DIV4 (5 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Right-shift R-value by 2 (÷ 4) */
# define CS2100_DEVCFG1_RMODSEL_DIV8 (6 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Right-shift R-value by 3 (÷ 8) */
# define CS2100_DEVCFG1_RMODSEL_DIV16 (7 << CS2100_DEVCFG1_RMODSEL_SHIFT) /* Right-shift R-value by 4 (÷ 16) */
/* Global Configuration */
#define CS2100_GBLCFG_ENDEVCFG2 (1 << 0) /* Bit 0: Enable 2 */
#define CS2100_GBLCFG_FREEZE (1 << 3) /* Bit 3: Mods not applied until unfrozen */
/* Ratio: Bits 0-31 (4 x 8-bit values) */
/* Function Configuration 1 */
#define CS2100_FNCCFG1_REFCLKDIV_SHIFT (3) /* Bits 3-4: Reference Clock Input Divider */
#define CS2100_FNCCFG1_REFCLKDIV_MASK (3 << CS2100_FNCCFG1_REFCLKDIV_SHIFT)
# define CS2100_FNCCFG1_REFCLKDIV_DIV4 (3 << CS2100_FNCCFG1_REFCLKDIV_SHIFT) /* ÷ 4. 32 MHz to 75 MHz (50 MHz with XTI) */
# define CS2100_FNCCFG1_REFCLKDIV_DIV2 (3 << CS2100_FNCCFG1_REFCLKDIV_SHIFT) /* ÷ 2. 16 MHz to 37.5 MHz */
# define CS2100_FNCCFG1_REFCLKDIV_NONE (3 << CS2100_FNCCFG1_REFCLKDIV_SHIFT) /* ÷ 1. 8 MHz to 18.75 MHz */
#define CS2100_FNCCFG1_AUXLOCKCFG_MASK (1 << 6) /* Bit 6: AUX PLL Lock Output Configuration */
# define CS2100_FNCCFG1_AUXLOCKCFG_PP (0 << 6) /* 0=Push-Pull */
# define CS2100_FNCCFG1_AUXLOCKCFG_PP (1 << 6) /* 1=Open Drain */
#define CS2100_FNCCFG1_CLKSKIPEN (1 << 7) /* Bit 7: Clock Skip Enable */
/* Function Configuration 2 */
#define CS2100_FNCCFG2_LFRATIOCFG (1 << 3) /* Bit 3: Low-Frequency Ratio Configuration */
#define CS2100_FNCCFG2_CLKOUTUNL (1 << 4) /* Bit 4: Enable PLL Clock Output on Unlock */
/* Function Configuration 3 */
#define CS2100_FNCCFG3_CLKINBW_SHIFT (4) /* Bits 4-6: Clock Input Bandwidth */
#define CS2100_FNCCFG3_CLKINBW_MASK (7 << CS2100_FNCCFG3_CLKINBW_SHIFT)
# define CS2100_FNCCFG3_CLKINBW_1HZ (0 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 1 Hz */
# define CS2100_FNCCFG3_CLKINBW_2HZ (1 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 2 Hz */
# define CS2100_FNCCFG3_CLKINBW_4HZ (2 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 4 Hz */
# define CS2100_FNCCFG3_CLKINBW_8HZ (3 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 8 Hz */
# define CS2100_FNCCFG3_CLKINBW_16HZ (4 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 16 Hz */
# define CS2100_FNCCFG3_CLKINBW_32HZ (5 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 32 Hz */
# define CS2100_FNCCFG3_CLKINBW_64HZ (6 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 64 Hz */
# define CS2100_FNCCFG3_CLKINBW_128HZ (7 << CS2100_FNCCFG3_CLKINBW_SHIFT) /* 128 Hz */
/****************************************************************************
* Public Types
****************************************************************************/
struct cs2100_config_s
{
FAR struct i2c_master_s *i2c; /* Instance of an I2C interface */
uint32_t i2cfreq; /* I2C frequency */
uint32_t refclk; /* RefClk/XTAL frequency */
uint32_t clkin; /* Frequency CLK_IN provided to the CS2100-CP */
uint32_t clkout; /* Desired CLK_OUT frequency */
uint8_t i2caddr; /* CP2100-CP I2C address */
uint8_t loopbw; /* Minimum loop bandwidth: 1-128 */
bool xtal; /* false: Refclck, true: Crystal on XTI/XTO */
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
struct i2c_master_s; /* Forward reference */
/****************************************************************************
* Name: cs2100_enable
*
* Description:
* Enable CS2100 CLK_OUT using the provide parameters
*
* Input Parameters:
* config - CS2100-CP configuration
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
int cs2100_enable(FAR const struct cs2100_config_s *config);
/****************************************************************************
* Name: cs2100_disable
*
* Description:
* Disable CS2100 CLK_OUT
*
* Input Parameters:
* config - CS2100-CP configuration
* (Needed only for I2C access: i2c and i2caddr)
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
int cs2100_disable(FAR const struct cs2100_config_s *config);
/****************************************************************************
* Name: cs2100_dump
*
* Description:
* Dump CS2100-CP registers to the SysLog
*
* Input Parameters:
* config - CS2100-CP configuration
* (Needed only for I2C access: i2c and i2caddr)
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
#ifdef CONFIG_CS2100CP_DEBUG
int cs2100_dump(FAR const struct cs2100_config_s *config);
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_TIMERS_CS2100CP */
#endif /* __INCLUDE_NUTTX_TIMERS_CS2100_CP_H */