incubator-nuttx/include/nuttx/audio/es8388.h

192 lines
5.7 KiB
C

/****************************************************************************
* include/nuttx/audio/es8388.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_AUDIO_ES8388_H
#define __INCLUDE_NUTTX_AUDIO_ES8388_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/irq.h>
#ifdef CONFIG_AUDIO_ES8388
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************
*
* CONFIG_AUDIO_ES8388 - Enables ES8388 support
* CONFIG_ES8388_INITVOLUME - The initial volume level
* in the range {0..1000}
* CONFIG_ES8388_INFLIGHT - Maximum number of buffers that the ES8388
* driver will send to the I2S driver before any have completed.
* CONFIG_ES8388_MSG_PRIO - Priority of messages sent to the ES8388
* worker thread.
* CONFIG_ES8388_BUFFER_SIZE - Preferred buffer size
* CONFIG_ES8388_NUM_BUFFERS - Preferred number of buffers
* CONFIG_ES8388_WORKER_STACKSIZE - Stack size to use when creating the the
* ES8388 worker thread.
* CONFIG_ES8388_REGDUMP - Enable logic to dump all ES8388 registers to
* the SYSLOG device.
*/
/* Pre-requisites */
#ifndef CONFIG_AUDIO
# error CONFIG_AUDIO is required for audio subsystem support
#endif
#ifndef CONFIG_I2S
# error CONFIG_I2S is required by the ES8388 driver
#endif
#ifndef CONFIG_I2C
# error CONFIG_I2C is required by the ES8388 driver
#endif
#ifndef CONFIG_SCHED_WORKQUEUE
# error CONFIG_SCHED_WORKQUEUE is required by the ES8388 driver
#endif
/* Default configuration values */
#ifndef CONFIG_ES8388_INPUT_INITVOLUME
# define CONFIG_ES8388_INPUT_INITVOLUME 1000
#endif
#ifndef CONFIG_ES8388_OUTPUT_INITVOLUME
# define CONFIG_ES8388_OUTPUT_INITVOLUME 400
#endif
#ifndef CONFIG_ES8388_INFLIGHT
# define CONFIG_ES8388_INFLIGHT 2
#endif
#if CONFIG_ES8388_INFLIGHT > 255
# error CONFIG_ES8388_INFLIGHT must fit in a uint8_t
#endif
#ifndef CONFIG_ES8388_MSG_PRIO
# define CONFIG_ES8388_MSG_PRIO 1
#endif
#ifndef CONFIG_ES8388_BUFFER_SIZE
# define CONFIG_ES8388_BUFFER_SIZE 8192
#endif
#ifndef CONFIG_ES8388_NUM_BUFFERS
# define CONFIG_ES8388_NUM_BUFFERS 4
#endif
#ifndef CONFIG_ES8388_WORKER_STACKSIZE
# define CONFIG_ES8388_WORKER_STACKSIZE 2048
#endif
/****************************************************************************
* Public Types
****************************************************************************/
struct es8388_lower_s;
struct es8388_lower_s
{
/* I2C characterization */
uint32_t frequency; /* Initial I2C frequency */
uint8_t address; /* 7-bit I2C address (only bits 0-6 used) */
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: es8388_initialize
*
* Description:
* Initialize the ES8388 device.
*
* Input Parameters:
* i2c - An I2C driver instance
* i2s - An I2S driver instance
* lower - Persistent board configuration data
*
* Returned Value:
* A new lower half audio interface for the ES8388 device is returned on
* success; NULL is returned on failure.
*
****************************************************************************/
struct i2c_master_s;
struct i2s_dev_s;
struct audio_lowerhalf_s;
FAR struct audio_lowerhalf_s *
es8388_initialize(FAR struct i2c_master_s *i2c,
FAR struct i2s_dev_s *i2s,
FAR const struct es8388_lower_s *lower);
/****************************************************************************
* Name: es8388_dump_registers
*
* Description:
* Dump the contents of all ES8388 registers to the syslog device
*
* Input Parameters:
* dev - The device instance returned by es8388_initialize
*
* Returned Value:
* None.
*
****************************************************************************/
#ifdef CONFIG_ES8388_REGDUMP
void es8388_dump_registers(FAR struct audio_lowerhalf_s *dev,
FAR const char *msg);
#else
# define es8388_dump_registers(d,m)
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_AUDIO_ES8388 */
#endif /* __INCLUDE_NUTTX_AUDIO_ES8388_H */