| .. |
|
analog
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
audio
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
binfmt
|
Oops.. part of the last change will still in the editor
|
2014-11-12 18:33:07 -06:00 |
|
crypto
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
eeprom
|
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
|
2014-12-05 09:13:34 -06:00 |
|
fs
|
boardctl(): Add a new non-standard OS interface. This is similar to a driver IOCTL call. But this is an IOCTL call directly on the board logic. This function will eventually replace all of the ad hoc OS interfaces that are current used to perform application specific intialiation and application driver test confifuration. It essentially formalizes and institutionalizes these rogue interface in to at least a single crazy call.
|
2015-03-31 11:25:52 -06:00 |
|
input
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
lcd
|
RA8875 LCD driver contributed by Marten Svanfeldt
|
2015-04-24 07:46:03 -06:00 |
|
mm
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
mtd
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
net
|
Use common macro(s) for calculating link layer header length. From Brennan Ashton.
|
2015-04-13 13:53:13 -06:00 |
|
nx
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
power
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
sensors
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
sercomm
|
…
|
|
|
serial
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
spi
|
SPI: Add a board-specific SPI device value
|
2015-03-02 10:17:12 -06:00 |
|
syslog
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
timers
|
Add a very basic driver for the CS2100-CP Fractional-N Multipler chip.
|
2015-04-02 13:00:10 -06:00 |
|
usb
|
Costmetic update to some comments
|
2015-05-02 14:34:49 -06:00 |
|
video
|
fb.h: Costmetic changes
|
2015-04-26 08:02:01 -06:00 |
|
wireless
|
Make some file section headers more consistent with standard
|
2015-04-08 07:25:06 -06:00 |
|
.gitignore
|
…
|
|
|
addrenv.h
|
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
|
2014-09-24 07:29:09 -06:00 |
|
arch.h
|
Remove some prototypes from arch.h that do not belong there
|
2015-02-27 20:06:11 -06:00 |
|
ascii.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
board.h
|
More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize
|
2015-04-04 11:49:15 -06:00 |
|
can.h
|
Standardize some header files
|
2015-02-16 14:29:43 -06:00 |
|
clock.h
|
last change alters semantics of __HAVE_KERNEL_GLOBALS
|
2014-08-30 14:44:48 -06:00 |
|
compiler.h
|
Add support for the restrict keyword
|
2015-02-17 08:24:20 -06:00 |
|
configdata.h
|
SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM
|
2015-03-19 14:53:05 -06:00 |
|
float.h
|
…
|
|
|
i2c.h
|
I2C interface: Add a parmeter to I2C slave callback
|
2015-03-03 14:48:52 -06:00 |
|
init.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
irq.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
kmalloc.h
|
Move include/nuttx/mm.h to include/nuttx/mm/mm.h
|
2014-09-24 07:29:09 -06:00 |
|
kthread.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
lib.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
math.h
|
Add math library defines for nan functions. From Brennan Ashton.
|
2015-01-26 19:03:38 -06:00 |
|
mmcsd.h
|
Standardize some header files
|
2015-02-16 14:29:43 -06:00 |
|
mqueue.h
|
Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes
|
2014-09-30 08:03:39 -06:00 |
|
page.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pgalloc.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
poff.h
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
progmem.h
|
STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin
|
2014-08-28 09:11:20 -06:00 |
|
pthread.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
pwm.h
|
Standardize some header files
|
2015-02-16 14:29:43 -06:00 |
|
regex.h
|
Standardize some header files
|
2015-02-16 14:29:43 -06:00 |
|
rwbuffer.h
|
Standardize some header files
|
2015-02-16 14:29:43 -06:00 |
|
sched.h
|
strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8.
|
2014-12-17 12:24:02 -06:00 |
|
scsi.h
|
Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete).
|
2014-09-28 10:15:33 -06:00 |
|
sdio.h
|
Remove execute privileges from some header files
|
2015-02-01 06:24:18 -06:00 |
|
semaphore.h
|
Complete re-implementation of mq_close
|
2014-09-29 15:33:34 -06:00 |
|
spawn.h
|
…
|
|
|
stdarg.h
|
Some typos noted by David Sidrane
|
2015-02-23 11:49:02 -06:00 |
|
streams.h
|
Implement setlogmask(); move some syslog logic from libc/syslog to fs/syslog
|
2014-10-08 19:08:26 -06:00 |
|
time.h
|
Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.
|
2015-04-08 06:56:43 -06:00 |
|
tree.h
|
Fix error in tree.h
|
2014-06-02 13:44:44 -06:00 |
|
userspace.h
|
Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK
|
2014-10-11 15:59:40 -06:00 |
|
vt100.h
|
Add ANSI/VT100 color codes
|
2014-11-10 15:10:57 -06:00 |
|
wdog.h
|
Cosmetic updates to comments
|
2015-02-12 13:44:22 -06:00 |
|
wqueue.h
|
Fix warning caused by missing comment closing */. From David Sidrane.
|
2014-12-30 06:22:18 -06:00 |
1f15b552ed