incubator-nuttx/net/pkt/pkt.h

288 lines
9.8 KiB
C

/****************************************************************************
* net/pkt/pkt.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef _NET_PKT_PKT_H
#define _NET_PKT_PKT_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#ifdef CONFIG_NET_PKT
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Allocate a new packet socket data callback */
#define pkt_callback_alloc(conn) devif_callback_alloc(&conn->list)
#define pkt_callback_free(conn,cb) devif_callback_free(cb, &conn->list)
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/* Representation of a uIP packet socket connection */
struct devif_callback_s; /* Forward reference */
struct pkt_conn_s
{
dq_entry_t node; /* Supports a double linked list */
uint8_t lmac[6]; /* The local Ethernet address in network byte order */
uint8_t ifindex;
uint16_t proto;
uint8_t crefs; /* Reference counts on this instance */
/* Defines the list of packet callbacks */
struct devif_callback_s *list;
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
# define EXTERN extern "C"
extern "C"
{
#else
# define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
struct eth_hdr_s; /* Forward reference */
/* Defined in pkt_conn.c ****************************************************/
/****************************************************************************
* Name: pkt_initialize()
*
* Description:
* Initialize the packet socket connection structures. Called once and
* only from the network initialization logic.
*
****************************************************************************/
void pkt_initialize(void);
/****************************************************************************
* Name: pkt_palloc()
*
* Description:
* Allocate a new, uninitialized packet socket connection structure. This
* is normally something done by the implementation of the socket() API
*
****************************************************************************/
FAR struct pkt_conn_s *pkt_alloc(void);
/****************************************************************************
* Name: pkt_free()
*
* Description:
* Free a packet socket connection structure that is no longer in use.
* This should be done by the implementation of close().
*
****************************************************************************/
void pkt_free(FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_active()
*
* Description:
* Find a connection structure that is the appropriate
* connection to be used with the provided Ethernet header
*
* Assumptions:
* This function is called from UIP logic at interrupt level
*
****************************************************************************/
struct pkt_conn_s *pkt_active(FAR struct eth_hdr_s *buf);
/****************************************************************************
* Name: pkt_nextconn()
*
* Description:
* Traverse the list of allocated packet connections
*
* Assumptions:
* This function is called from UIP logic at interrupt level (or with
* interrupts disabled).
*
****************************************************************************/
struct pkt_conn_s *pkt_nextconn(FAR struct pkt_conn_s *conn);
/* Defined in pkt_callback.c ************************************************/
/****************************************************************************
* Function: pkt_callback
*
* Description:
* Inform the application holding the packet socket of a change in state.
*
* Returned Value:
* OK if packet has been processed, otherwise ERROR.
*
* Assumptions:
* This function is called at the interrupt level with interrupts disabled.
*
****************************************************************************/
uint16_t pkt_callback(FAR struct net_driver_s *dev,
FAR struct pkt_conn_s *conn, uint16_t flags);
/* Defined in pkt_input.c ***************************************************/
/****************************************************************************
* Name: pkt_input
*
* Description:
* Handle incoming packet input
*
* Parameters:
* dev - The device driver structure containing the received packet
*
* Return:
* OK The packet has been processed and can be deleted
* ERROR Hold the packet and try again later. There is a listening socket
* but no recv in place to catch the packet yet.
*
* Assumptions:
* Called from the interrupt level or with interrupts disabled.
*
****************************************************************************/
/* pkt_input() is prototyped in include/nuttx/net/pkt.h */
/* Defined in pkt_poll.c ****************************************************/
/****************************************************************************
* Name: pkt_poll
*
* Description:
* Poll a packet "connection" structure for availability of TX data
*
* Parameters:
* dev - The device driver structure to use in the send operation
* conn - The packet "connection" to poll for TX data
*
* Return:
* None
*
* Assumptions:
* Called from the interrupt level or with interrupts disabled.
*
****************************************************************************/
void pkt_poll(FAR struct net_driver_s *dev, FAR struct pkt_conn_s *conn);
/****************************************************************************
* Function: psock_pkt_send
*
* Description:
* The psock_pkt_send() call may be used only when the packet socket is in a
* connected state (so that the intended recipient is known).
*
* Parameters:
* psock An instance of the internal socket structure.
* buf Data to send
* len Length of data to send
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately:
*
* EAGAIN or EWOULDBLOCK
* The socket is marked non-blocking and the requested operation
* would block.
* EBADF
* An invalid descriptor was specified.
* ECONNRESET
* Connection reset by peer.
* EDESTADDRREQ
* The socket is not connection-mode, and no peer address is set.
* EFAULT
* An invalid user space address was specified for a parameter.
* EINTR
* A signal occurred before any data was transmitted.
* EINVAL
* Invalid argument passed.
* EISCONN
* The connection-mode socket was connected already but a recipient
* was specified. (Now either this error is returned, or the recipient
* specification is ignored.)
* EMSGSIZE
* The socket type requires that message be sent atomically, and the
* size of the message to be sent made this impossible.
* ENOBUFS
* The output queue for a network interface was full. This generally
* indicates that the interface has stopped sending, but may be
* caused by transient congestion.
* ENOMEM
* No memory available.
* ENOTCONN
* The socket is not connected, and no target has been given.
* ENOTSOCK
* The argument s is not a socket.
* EPIPE
* The local end has been shut down on a connection oriented socket.
* In this case the process will also receive a SIGPIPE unless
* MSG_NOSIGNAL is set.
*
* Assumptions:
*
****************************************************************************/
struct socket;
ssize_t psock_pkt_send(FAR struct socket *psock, FAR const void *buf,
size_t len);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_NET_PKT */
#endif /* _NET_PKT_PKT_H */