OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/net/devif/devif.h

352 lines
13 KiB
C
Raw Blame History

/****************************************************************************
* net/devif/devif.h
*
* Copyright (C) 2007-2009, 2013-2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* This logic was leveraged from uIP which also has a BSD-style license:
*
* Author Adam Dunkels <adam@dunkels.com>
* Copyright (c) 2001-2003, Adam Dunkels.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef _NET_DEVIF_DEVIF_H
#define _NET_DEVIF_DEVIF_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifdef CONFIG_NET
#include <stdint.h>
#include <stdbool.h>
#include <errno.h>
#include <arch/irq.h>
#include <nuttx/net/ip.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* The following flags may be set in the set of flags by the lower, device-
* interfacing layer before calling through the socket layer callback. The
* TCP_ACKDATA, XYZ_NEWDATA, and TCP_CLOSE flags may be set at the same time,
* whereas the others are mutually exclusive.
*
* TCP_ACKDATA IN: Signifies that the outstanding data was ACKed and
* the socket layer should send out new data instead
* of retransmitting the last data (TCP only)
* OUT: Input state must be preserved on output.
*
* TCP_NEWDATA IN: Set to indicate that the peer has sent us new data.
* UDP_NEWDATA OUT: Cleared (only) by the socket layer logic to indicate
* PKT_NEWDATA that the new data was consumed, suppressing further
* ICMP_NEWDATA attempts to process the new data.
*
* TCP_SNDACK IN: Not used; always zero
* OUT: Set by the socket layer if the new data was consumed
* and an ACK should be sent in the response. (TCP only)
*
* TCP_REXMIT IN: Tells the socket layer to retransmit the data that
* was last sent. (TCP only)
* OUT: Not used
*
* TCP_POLL IN: Used for polling the socket layer. This is provided
* UDP_POLL periodically from the drivers to support (1) timed
* PKT_POLL operations, and (2) to check if the socket layer has
* ICMP_POLL data that it wants to send
* ICMPv6_POLL OUT: Not used
*
* TCP_BACKLOG IN: There is a new connection in the backlog list set
* up by the listen() command. (TCP only)
* OUT: Not used
*
* TCP_CLOSE IN: The remote host has closed the connection, thus the
* connection has gone away. (TCP only)
* OUT: The socket layer signals that it wants to close the
* connection. (TCP only)
*
* TCP_ABORT IN: The remote host has aborted the connection, thus the
* connection has gone away. (TCP only)
* OUT: The socket layer signals that it wants to abort the
* connection. (TCP only)
*
* TCP_CONNECTED IN: We have got a connection from a remote host and have
* set up a new connection for it, or an active connection
* has been successfully established. (TCP only)
* OUT: Not used
*
* TCP_TIMEDOUT IN: The connection has been aborted due to too many
* retransmissions. (TCP only)
* OUT: Not used
*
* ICMP_ECHOREPLY IN: An ICMP Echo Reply has been received. Used to support
* ICMPv6_ECHOREPLY ICMP ping from the socket layer. (ICMP only)
* OUT: Cleared (only) by the socket layer logic to indicate
* that the reply was processed, suppressing further
* attempts to process the reply.
*/
#define TCP_ACKDATA (1 << 0)
#define TCP_NEWDATA (1 << 1)
#define UDP_NEWDATA TCP_NEWDATA
#define PKT_NEWDATA TCP_NEWDATA
#define ICMP_NEWDATA TCP_NEWDATA
#define ICMPv6_NEWDATA TCP_NEWDATA
#define TCP_SNDACK (1 << 2)
#define TCP_REXMIT (1 << 3)
#define TCP_POLL (1 << 4)
#define UDP_POLL TCP_POLL
#define PKT_POLL TCP_POLL
#define ICMP_POLL TCP_POLL
#define ICMPv6_POLL TCP_POLL
#define TCP_BACKLOG (1 << 5)
#define TCP_CLOSE (1 << 6)
#define TCP_ABORT (1 << 7)
#define TCP_CONNECTED (1 << 8)
#define TCP_TIMEDOUT (1 << 9)
#define ICMP_ECHOREPLY (1 << 10)
#define ICMPv6_ECHOREPLY ICMP_ECHOREPLY
#define TCP_CONN_EVENTS (TCP_CLOSE | TCP_ABORT | TCP_CONNECTED | TCP_TIMEDOUT)
/* IPv4/IPv6 Helpers */
#ifdef CONFIG_NET_IPv4
# define DEVIF_IS_IPv4(dev) IFF_IS_IPv4(dev->d_flags)
#else
# define DEVIF_IS_IPv4(dev) (0)
#endif
#ifdef CONFIG_NET_IPv6
# define DEVIF_IS_IPv6(dev) IFF_IS_IPv6(dev->d_flags)
#else
# define DEVIF_IS_IPv6(dev) (0)
#endif
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/* Describes a device interface callback
*
* flink - Supports a singly linked list
* event - Provides the address of the callback function entry point.
* pvconn is a pointer to one of struct tcp_conn_s or struct
* udp_conn_s.
* priv - Holds a reference to socket layer specific data that will
* provided
* flags - Set by the socket layer to inform the lower layer which flags
* were and were not handled by the callback.
*/
struct net_driver_s; /* Forward reference */
struct devif_callback_s
{
FAR struct devif_callback_s *flink;
uint16_t (*event)(FAR struct net_driver_s *dev, FAR void *pvconn,
FAR void *pvpriv, uint16_t flags);
FAR void *priv;
uint16_t flags;
};
/****************************************************************************
* Public Data
****************************************************************************/
/* Well-known addresses */
#ifdef CONFIG_NET_IPv4
extern const in_addr_t g_ipv4_alloneaddr;
extern const in_addr_t g_ipv4_allzeroaddr;
#endif
#ifdef CONFIG_NET_IPv6
extern const net_ipv6addr_t g_ipv6_alloneaddr;
extern const net_ipv6addr_t g_ipv6_allzeroaddr;
#endif
/* Increasing number used for the IP ID field. */
extern uint16_t g_ipid;
#if defined(CONFIG_NET_TCP_REASSEMBLY) && !defined(CONFIG_NET_IPv6)
/* Reassembly timer (units: deci-seconds) */
extern uint8_t g_reassembly_timer;
#endif
#if defined(CONFIG_NET_ICMP) && defined(CONFIG_NET_ICMP_PING)
/* List of applications waiting for ICMP ECHO REPLY */
extern struct devif_callback_s *g_icmp_echocallback;
#endif
#if defined(CONFIG_NET_ICMPv6) && defined(CONFIG_NET_ICMPv6_PING)
/* List of applications waiting for ICMPv6 ECHO REPLY */
extern struct devif_callback_s *g_icmpv6_echocallback;
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: devif_initialize
*
* Description:
* Perform initialization of the network device interface layer
*
* Parameters:
* None
*
* Return:
* None
*
****************************************************************************/
void devif_initialize(void);
/****************************************************************************
* Function: devif_callback_init
*
* Description:
* Configure the pre-allocated callback structures into a free list.
* This is called internally as part of uIP initialization and should not
* be accessed from the application or socket layer.
*
* Assumptions:
* This function is called with interrupts disabled.
*
****************************************************************************/
void devif_callback_init(void);
/****************************************************************************
* Function: devif_callback_alloc
*
* Description:
* Allocate a callback container from the free list.
* This is called internally as part of uIP initialization and should not
* be accessed from the application or socket layer.
*
* Assumptions:
* This function is called with interrupts disabled.
*
****************************************************************************/
FAR struct devif_callback_s *devif_callback_alloc(FAR struct devif_callback_s **list);
/****************************************************************************
* Function: devif_callback_free
*
* Description:
* Return a callback container to the free list.
* This is called internally as part of uIP initialization and should not
* be accessed from the application or socket layer.
*
* Assumptions:
* This function is called with interrupts disabled.
*
****************************************************************************/
void devif_callback_free(FAR struct devif_callback_s *cb,
FAR struct devif_callback_s **list);
/****************************************************************************
* Function: devif_callback_execute
*
* Description:
* Execute a list of callbacks.
* This is called internally as part of uIP initialization and should not
* be accessed from the application or socket layer.
*
* Assumptions:
* This function is called with interrupts disabled.
*
****************************************************************************/
uint16_t devif_callback_execute(FAR struct net_driver_s *dev, FAR void *pvconn,
uint16_t flags, FAR struct devif_callback_s *list);
/****************************************************************************
* Send data on the current connection.
*
* This function is used to send out a single segment of TCP data. Only
* socket logic that have been invoked by the lower level for event
* processing can send data.
*
* The amount of data that actually is sent out after a call to this
* function is determined by the maximum amount of data TCP allows. uIP
* will automatically crop the data so that only the appropriate
* amount of data is sent. The function tcp_mss() can be used to query
* uIP for the amount of data that actually will be sent.
*
* Note: This function does not guarantee that the sent data will
* arrive at the destination. If the data is lost in the network, the
* TCP socket layer will be invoked with the TCP_REXMIT flag set. The
* socket layer will then have to resend the data using this function.
*
* data A pointer to the data which is to be sent.
*
* len The maximum amount of data bytes to be sent.
*
****************************************************************************/
void devif_send(FAR struct net_driver_s *dev, FAR const void *buf, int len);
#ifdef CONFIG_NET_IOB
struct iob_s;
void devif_iob_send(FAR struct net_driver_s *dev, FAR struct iob_s *buf,
unsigned int len, unsigned int offset);
#endif
#ifdef CONFIG_NET_PKT
void devif_pkt_send(FAR struct net_driver_s *dev, FAR const void *buf,
unsigned int len);
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_NET */
#endif /* _NET_DEVIF_DEVIF_H */
Reference in New Issue View Git Blame Copy Permalink