incubator-nuttx/TODO

86 lines
2.6 KiB
Plaintext

NuttX TODO List
^^^^^^^^^^^^^^^
o Task/Scheduler
- When a tasks exits, shouldn't all of its child pthreads also be terminated?
- Should task_delete() cause atexit() function to be called?
- Implement sys/mman.h and functions
- Implement sys/wait.h and functions
- Implement priority inheritance
- Consider implementing wait, waitpid, waitid. At present, a parent has
no information about child tasks.
- Several APIs do not set errno. Need to review all APIs.
o Memory Managment
- Add an option to free all memory allocated by a task when the task exits.
This is probably not be worth the overhead for a deeply embedded system.
- Current logic adapts size_t for 16-bit address machines vs. 32-bit address
machines. But a small memory option should also be provided so that
the small offset option can be used with 32-bit machines that have small
RAM memories (like the lpc2148)
o Signals
- 'Standard' signals and signal actions are not supported.
o pthreads
- pthread_cancel(): Should implement cancellation points and pthread_testcancel()
o C++ Support
- Need to call static constructors
o Network
- Port FreeBSD TCP/IP stack
o USB
- Implement USB device support
- Implement USB bulk device
o Libraries
- sscanf() and lib_vsprintf() do not support floating point values.
- The definition of environ in stdlib.h is bogus and will not work as it should. This
is because the underlying representation of the environment is not an arry of pointers.
o File system
- Add chmod(), truncate().
- FAT32: long file names
o Console Output
o Documentation
- Document fs/ & driver/ logic
- Document C-library APIs
o Build system
- Some names under arch are still incorrect. These should be processor architecture
names: pjrc-8051 should be 805x
- configs/pjrc-8051 should be configs/pjrc-87c52
o Applications & Tests
o C5471
o DM320
o LPC214x
- Finish bringup
- Add MMC and USB support
o pjrc-8052 / MCS51
- Current status:
- Basic OS task management seems OK
- Fails when interrupts enabled. The stack pointer is around 0x6e
before the failure occurs. It looks like some issue when the
stack pointer moves from the directly to indirectly addressable
region (0x80 boundary).
- Work on the 8052 is temporarily on hold
- Use timer 0 as system timer. Timer 2 is needed for second UART.
Logic is implemented, but there needs to be a system configuration
to change the ticks-per-second value to match the timer interrupt
rate
- During build, there are several integer overflows reported:
gmtime_r.c aroud lines 184 and 185
clock_initialize.c at line 107
pthread_create.c at 330
sighand.c at 225 and 244