incubator-nuttx/configs/z16f2800100zcog/ostest/Make.defs

171 lines
5.6 KiB
Plaintext

############################################################################
# configs/z16f2800100zcog/ostest/Make.defs
#
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# These are the directories where the ZNeo-II toolchain is installed
ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_ZNEO_4.11.0
ZDSBINDIR := $(ZDSINSTALLDIR)/bin
ZDSSTDINCDIR := $(ZDSINSTALLDIR)/include/std
ZDSZILOGINCDIR := $(ZDSINSTALLDIR)/include/zilog
ZDSSTDLIBDIR := $(ZDSINSTALLDIR)/lib/std
ZDSZILOGLIBDIR := $(ZDSINSTALLDIR)/lib/zilog
# These are the same directories but with the directory separator
# character swapped as needed by the ZNeo-II compiler
WTOPDIR := ${shell cygpath -w $(TOPDIR)}
WZDSSTDINCDIR := ${shell cygpath -w $(ZDSSTDINCDIR)}
WZDSZILOGINCDIR := ${shell cygpath -w $(ZDSZILOGINCDIR)}
WZDSSTDLIBDIR := ${shell cygpath -w $(ZDSSTDLIBDIR)}
WZDSZILOGLIBDIR := ${shell cygpath -w $(ZDSZILOGLIBDIR)}
# Escaped versions
ETOPDIR := ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
EZDSSTDINCDIR := ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
EZDSZILOGINCDIR := ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
# Assembler definitions
ifeq ("${CONFIG_DEBUG}","y")
ARCHASMOPTIMIZATION = -debug
else
ARCHASMOPTIMIZATION = -nodebug
endif
ARCHASMCPUFLAGS = -cpu:Z16F2811AL -NOigcase
ARCHASMLIST = -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
ARCHASMWARNINGS = -warn
ARCHASMDEFINES = -define:_Z16F2811AL=1 -define:_Z16K_SERIES=1 -define:_Z16F_SERIES=1 \ -define:__ASSEMBLY__
ARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) \
$(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)
# Compiler definitions
ifeq ("${CONFIG_DEBUG}","y")
ARCHOPTIMIZATION = -debug -NOregvar -reduceopt
else
ARCHOPTIMIZATION = -nodebug -regvar
endif
ARCHCPUFLAGS = -chartype:S -model:L -NOmodsect -cpu:Z16F2811AL -NOgenprint \
-asmsw:" $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)"
ARCHLIST = -keeplst -NOlist -NOlistinc -NOkeepasm
ARCHPICFLAGS =
ARCHWARNINGS = -warn
ARCHDEFINES = -define:_Z16F2811AL -define:_Z16K_SERIES \
-define:_Z16F_SERIES
ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
ARCHUSRINCLUDES = -usrinc:'.'
ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) \
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES)
CPPDEFINES = -D_Z16F2811AL -D_Z16K_SERIES -D_Z16F_SERIES -D__ASSEMBLY__
CPPINCLUDES = -I$(TOPDIR)/include
CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES)
# Librarian definitions
ARFLAGS = -quiet -warn
# Linker definitions
LINKCMDTEMPLATE = $(TOPDIR)/configs/z16f2800100zcog/ostest/ostest.linkcmd
# Tool names/pathes
CROSSDEV =
CC = $(ZDSBINDIR)/zneocc.exe
CPP = gcc -E
LD = $(ZDSBINDIR)/zneolink.exe
AS = $(ZDSBINDIR)/zneoasm.exe
AR = $(ZDSBINDIR)/zneolib.exe
# File extensions
ASMEXT = .asm
OBJEXT = .obj
LIBEXT = .lib
EXEEXT = .hex
# These are the macros that will be used in the NuttX make system
# to compile and assembly source files and to insert the resulting
# object files into an archive
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@#echo "CC: $1"
@(wfile=`cygpath -w $1`; $(CC) $(CFLAGS) $$wfile)
endef
define ASSEMBLE
@#echo "AS: $1"
@(wfile=`cygpath -w $1`; $(AS) $(AFLAGS) $$wfile)
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $(ARFLAGS) $1=-+$2 || { echo "$(AR) $1=-+$2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.obj *.src *.lib *.hex *.lst
endef
# This is the tool to use for dependencies (i.e., none)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
# ZNeo-II cannot follow Cygwin soft links, so we will have to use directory copies
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
# Linux/Cygwin host tool definitions
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =