incubator-nuttx/configs/ntosd-dm320/include/board.h

109 lines
3.8 KiB
C

/************************************************************************************
* arch/board/board.h
*
* Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#ifndef __ASSEMBLY__
# include <sys/types.h>
#endif
/************************************************************************************
* Definitions
************************************************************************************/
/* This platform has the ARM at 175 MHz and the DSP at 101.25 MHz */
#define DM320_ARM_CLOCK 175500000
#define DM320_SDR_CLOCK 101250000
#define DM320_DSP_CLOCK 101250000
#define DM320_AXL_CLOCK 175500000
#define DM320_AHB_CLOCK 87750000
/* UART0/1 and TIMER0/1 are clocked by PLLIN=27MHz */
#define CONFIG_DM320_UARTPPLIN 1
/* Configration for dm9000 network device */
#define DM9000_BASE CONFIG_DM9000_BASE
/* GIO keyboard (GIO 1-5) */
#define KEY_MASK 0x003E
#define KEY_SCAN0_BIT 0x0002
#define KEY_SCAN1_BIT 0x0004
#define KEY_SCAN2_BIT 0x0008
#define KEY_SCAN3_BIT 0x0010
#define KEY_SCAN4_BIT 0x0020
#define KEY_GIO_DIR0_VAL KEY_MASK /* Configure as INPUT */
#define KEY_GIO_INV0_VAL KEY_MASK /* All inverted */
#define KEY_GIO_SET0_VAL (0) /* Initialized to zero */
#define KEY_GIO_CLR0_VAL (0)
#define GIO_KEY_SCAN0 1
#define GIO_KEY_SCAN1 2
#define GIO_KEY_SCAN2 3
#define GIO_KEY_SCAN3 4
#define GIO_KEY_SCAN4 5
#define GIO_MS_DETECT 5
#define GIO_DM9000A_INT 6
#define GIO_MMC_DETECT 8
#define GIO_CFC_DETECT 9
#define GIO_VIDEO_IN 10
#define GIO_LED_RED 16
#define GIO_LED_GREEN 17
#define GIO_CFC_ENABLE 25
#define GIO_I2C_SCL 30
#define GIO_I2C_SDA 31
#define GIO_ENA_VIDEO 32
#define GIO_CFC_RESET 36
#define GIO_CFC_STSCHG 37
/************************************************************************************
* Inline Functions
************************************************************************************/
#ifndef __ASSEMBLY__
#endif
#endif /* __ARCH_BOARD_BOARD_H */