incubator-nuttx/include/nuttx/power/regulator.h

237 lines
7.9 KiB
C

/****************************************************************************
* include/nuttx/power/regulator.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_POWER_REGULATOR_H
#define __INCLUDE_NUTTX_POWER_REGULATOR_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <semaphore.h>
#include <nuttx/list.h>
#include <nuttx/mutex.h>
#include <nuttx/wqueue.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Types
****************************************************************************/
struct regulator_dev_s;
struct regulator_s
{
struct work_s disable_work;
int min_uv;
int max_uv;
struct list_node list;
struct regulator_dev_s *rdev;
};
struct regulator_ops_s
{
CODE int (*list_voltage)(FAR struct regulator_dev_s *rdev,
unsigned int selector);
CODE int (*set_voltage)(FAR struct regulator_dev_s *rdev, int min_uv,
int max_uv, FAR unsigned int *selector);
CODE int (*set_voltage_sel)(FAR struct regulator_dev_s *rdev,
unsigned int selector);
CODE int (*get_voltage)(FAR struct regulator_dev_s *rdev);
CODE int (*get_voltage_sel)(FAR struct regulator_dev_s *rdev);
CODE int (*enable)(FAR struct regulator_dev_s *rdev);
CODE int (*is_enabled)(FAR struct regulator_dev_s *rdev);
CODE int (*disable)(FAR struct regulator_dev_s *rdev);
CODE int (*enable_pulldown)(FAR struct regulator_dev_s *rdev);
CODE int (*disable_pulldown)(FAR struct regulator_dev_s *rdev);
};
/* This structure describes the regulators capabilities */
struct regulator_desc_s
{
const char *name; /* Regulator output name */
unsigned int id; /* Numerical id for a given regulator of
* a device
*/
unsigned int n_voltages; /* Number of discrete voltages */
unsigned int vsel_reg; /* Device register for voltage selection */
unsigned int vsel_mask; /* Register mask, for voltage selection */
unsigned int enable_reg; /* Device register for enable/disable */
unsigned int enable_mask; /* Register mask for enable/disable */
unsigned int enable_time; /* Time for initial enable of regulator */
unsigned int ramp_delay; /* Rate of change for setting new voltage */
unsigned int uv_step; /* Voltage per step if linear mapping_uv */
unsigned int min_uv; /* Minimum acceptable voltage */
unsigned int max_uv; /* Maximum acceptable voltage */
unsigned int pulldown; /* Enable pulldown when disabled */
unsigned int pulldown_reg; /* Device register, for pulldown enable */
unsigned int pulldown_mask; /* Register mask, for pulldown enable */
unsigned int apply_uv; /* If true, the voltage specifed (between) * min_uv and max_uv will be applied during
* initialisation.
*/
unsigned int boot_on; /* true if this regulator is to be enabled
* at power up/reset
*/
};
struct regulator_dev_s
{
FAR const struct regulator_desc_s *desc;
FAR const struct regulator_ops_s *ops;
uint32_t use_count;
uint32_t open_count;
mutex_t regulator_lock;
struct list_node list;
struct list_node consumer_list;
FAR void *priv;
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: regulator_register
*
* Description:
* Register a lower half regulator driver with the common, upper-half
* regulator driver.
*
* Input parameters:
* desc - The regulator descriptor struct.
* ops - The regulator operations pointer
*
* Returned value:
* The pointer to struct regulator_dev_s on success or NULL on failure.
*
****************************************************************************/
struct regulator_dev_s *
regulator_register(FAR const struct regulator_desc_s *desc,
FAR const struct regulator_ops_s *ops,
FAR void *priv);
/****************************************************************************
* Name: regulator_unregister
*
* Description:
* Unregister a lower half regulator driver with the common, upper-half
* regulator driver.
*
* Input parameters:
* rdev - The regulator dev pointer.
*
* Returned value:
* N/A
*
****************************************************************************/
void regulator_unregister(FAR struct regulator_dev_s *rdev);
/****************************************************************************
* Name: regulator_gpio_init
*
* Description:
*
* Input Parameters:
*
* iodev - The ioexpander dev pointer.
* desc - The regulator desc pointer, must contain follow section
* name - The regulator name.
* enable_reg - The regulator gpio pin number.
* enable_mask -
* true : enable is high, disable is low
* false: enable is low, disable is high
*
* Returned Value:
*
****************************************************************************/
int regulator_gpio_init(FAR struct ioexpander_dev_s *iodev,
FAR const struct regulator_desc_s *desc);
#if defined(CONFIG_REGULATOR_RPMSG)
/****************************************************************************
* Name: regulator_rpmsg_get
*
* Description:
*
* Input Parameters:
*
* name - the name for register the rpmsg regulator dev
*
* Returned Value:
*
* Regulator dev pointer
*
****************************************************************************/
FAR struct regulator_dev_s *regulator_rpmsg_get(FAR const char *name);
/****************************************************************************
* Name: regulator_rpmsg_server_init
*
* Description:
*
* Establish rpmsg channel for the operations of the remote regulator
*
* Input Parameters:
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
****************************************************************************/
int regulator_rpmsg_server_init(void);
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __INCLUDE_NUTTX_POWER_REGULATOR_H */