OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/drivers/analog/max1161x.c

597 lines
18 KiB
C
Raw Blame History

/****************************************************************************
* drivers/analog/max1161x.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* This driver is for a whole family of I2C ADC chips:
* +--------------+-----+----+--------+---------+
* | Type | VCC | In | Pkg | I2C Addr|
* +--------------+-----+----+--------+---------+
* | MAX11612EUA+ | 5V0 | 4 | 8μMAX | 0110100 |
* | MAX11613EUA+ | 3V3 | 4 | 8μMAX | 0110100 |
* | MAX11613EWC+ | 3V3 | 4 | 12WLP | 0110100 |
* | MAX11614EEE+ | 5V0 | 8 | 16QSOP | 0110011 |
* | MAX11615EEE+ | 3V3 | 8 | 16QSOP | 0110011 |
* | MAX11615EWE+ | 3V3 | 8 | 16WLP | 0110011 |
* | MAX11616EEE+ | 5V0 | 12 | 16QSOP | 0110101 |
* | MAX11617EEE+ | 3V3 | 12 | 16QSOP | 0110101 |
* | MAX11617EWE+ | 3V3 | 12 | 16WLP | 0110101 |
* +--------------+-----+----+--------+---------+
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <endian.h>
#include <nuttx/arch.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/analog/adc.h>
#include <nuttx/analog/ioctl.h>
#include <nuttx/analog/max1161x.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#if defined(CONFIG_ADC_MAX1161X)
#if defined(CONFIG_MAX1161X_4CHAN)
#define MAX1161X_NUM_CHANNELS 4
#define MAX1161X_CHANNELSTROBED 0x000f
#define MAX1161X_I2C_ADDR 0x34u
#elif defined(CONFIG_MAX1161X_8CHAN)
#define MAX1161X_NUM_CHANNELS 8
#define MAX1161X_CHANNELSTROBED 0x00ff
#define MAX1161X_I2C_ADDR 0x33u
#elif defined(CONFIG_MAX1161X_12CHAN)
#define MAX1161X_NUM_CHANNELS 12
#define MAX1161X_CHANNELSTROBED 0x0fff
#define MAX1161X_I2C_ADDR 0x35u
#else
#error "MAX1161X Chip Type not defined"
#endif
#define MAX1161X_SETUP_MARKER (1 << 7)
#define MAX1161X_SETUP_REF_SHIFT 4
#define MAX1161X_SETUP_REF_MASK (7 << MAX1161X_SETUP_REF_SHIFT)
#define MAX1161X_SETUP_CLK (1 << 3)
#define MAX1161X_SETUP_UNIBIP (1 << 2)
#define MAX1161X_SETUP_RESET (1 << 1)
#define MAX1161X_CMD_MARKER (0 << 7)
#define MAX1161X_CMD_SCAN_SHIFT 5
#define MAX1161X_CMD_SCAN_MASK (3 << MAX1161X_CMD_SCAN_SHIFT)
#define MAX1161X_CMD_CHANNEL_SHIFT 1
#define MAX1161X_CMD_CHANNEL_MASK (15 << MAX1161X_CMD_CHANNEL_SHIFT)
#define MAX1161X_CMD_SNGDIF (1 << 0)
/****************************************************************************
* Private Types
****************************************************************************/
struct max1161x_dev_s
{
FAR struct i2c_master_s *i2c;
FAR const struct adc_callback_s *cb;
uint8_t addr;
/* List of channels to read on every convert trigger.
* Bit position corresponds to channel. i.e. bit0 = 1 to read channel 0.
*/
uint16_t chanstrobed;
/* Current configuration of the ADC. There are two bytes holding
* the complete configuration - the Setup Byte has Bit 7 always set,
* while the command byte has bit 7 alway reset
*/
uint8_t setupbyte;
uint8_t cmdbyte;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* max1161x helpers */
static int max1161x_readchannel(FAR struct max1161x_dev_s *priv,
FAR struct adc_msg_s *msg);
/* ADC methods */
static int max1161x_bind(FAR struct adc_dev_s *dev,
FAR const struct adc_callback_s *callback);
static void max1161x_reset(FAR struct adc_dev_s *dev);
static int max1161x_setup(FAR struct adc_dev_s *dev);
static void max1161x_shutdown(FAR struct adc_dev_s *dev);
static void max1161x_rxint(FAR struct adc_dev_s *dev, bool enable);
static int max1161x_ioctl(FAR struct adc_dev_s *dev, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct adc_ops_s g_adcops =
{
.ao_bind = max1161x_bind, /* ao_bind */
.ao_reset = max1161x_reset, /* ao_reset */
.ao_setup = max1161x_setup, /* ao_setup */
.ao_shutdown = max1161x_shutdown, /* ao_shutdown */
.ao_rxint = max1161x_rxint, /* ao_rxint */
.ao_ioctl = max1161x_ioctl /* ao_read */
};
static struct max1161x_dev_s g_adcpriv;
static struct adc_dev_s g_adcdev =
{
.ad_ops = &g_adcops,
.ad_priv = &g_adcpriv,
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: max1161x_manage_strobe
*
* Description:
* Controls which channels are read on ANIOC_TRIGGER. By default all
* channels are read.
*
* Returned Value:
* 0 on success. Negated errno on failure.
*
****************************************************************************/
static int max1161x_manage_strobe(FAR struct max1161x_dev_s *priv,
uint8_t channel, bool add_nremove)
{
int ret = OK;
if (priv == NULL || channel >= MAX1161X_NUM_CHANNELS)
{
ret = -EINVAL;
}
else
{
uint16_t flag = 1U << channel;
if (add_nremove)
{
priv->chanstrobed |= flag;
}
else
{
priv->chanstrobed &= ~flag;
}
}
return ret;
}
/****************************************************************************
* Name: max1161x_readchannel
*
* Description:
* Reads a conversion from the ADC.
*
* Input Parameters:
* msg - msg->am_channel should be set to the channel to be read.
* msg->am_data will store the result of the read.
*
* Returned Value:
* 0 on success. Negated errno on failure.
*
* Assumptions/Limitations:
* NOTE: When used in single-ended mode, msg->am_channel will be converted
* to the corresponding channel selection bits in the command byte.
* In differential mode, msg->am_channel is used as the channel
* selection bits. The corresponding "channels" are as follows:
*
* msg->am_channel Analog Source
* 0 +CH0, -CH1
* 1 +CH1, -CH0
* 2 +CH2, -CH3
* 3 +CH3, -CH2
* 4 +CH4, -CH5
* 5 +CH5, -CH4
* 6 +CH6, -CH7
* 7 +CH7, -CH6
*
****************************************************************************/
static int max1161x_readchannel(FAR struct max1161x_dev_s *priv,
FAR struct adc_msg_s *msg)
{
int ret = OK;
if (priv == NULL || msg == NULL)
{
ret = -EINVAL;
}
else
{
struct i2c_msg_s i2cmsg[3];
uint8_t channel = msg->am_channel & ~(MAX1161X_CMD_CHANNEL_MASK);
uint8_t setupbyte = priv->setupbyte;
uint8_t cmdbyte = priv->cmdbyte & ~(MAX1161X_CMD_CHANNEL_MASK);
cmdbyte |= channel << MAX1161X_CMD_CHANNEL_SHIFT;
i2cmsg[0].frequency = CONFIG_MAX1161X_FREQUENCY;
i2cmsg[0].addr = priv->addr;
i2cmsg[0].flags = I2C_M_NOSTOP;
i2cmsg[0].buffer = &setupbyte;
i2cmsg[0].length = sizeof(setupbyte);
i2cmsg[1].frequency = CONFIG_MAX1161X_FREQUENCY;
i2cmsg[1].addr = priv->addr;
i2cmsg[1].flags = I2C_M_NOSTOP;
i2cmsg[1].buffer = &cmdbyte;
i2cmsg[1].length = sizeof(cmdbyte);
i2cmsg[2].frequency = CONFIG_MAX1161X_FREQUENCY;
i2cmsg[2].addr = priv->addr;
i2cmsg[2].flags = I2C_M_READ;
uint16_t buf;
i2cmsg[2].buffer = (uint8_t *)(&buf);
i2cmsg[2].length = sizeof(buf);
ret = I2C_TRANSFER(priv->i2c, i2cmsg, 3);
if (ret < 0)
{
aerr("MAX1161X I2C transfer failed: %d", ret);
}
msg->am_data = be16toh(buf) & 0x0fffu;
}
return ret;
}
/****************************************************************************
* Name: max1161x_bind
*
* Description:
* Bind the upper-half driver callbacks to the lower-half implementation.
* This must be called early in order to receive ADC event notifications.
*
****************************************************************************/
static int max1161x_bind(FAR struct adc_dev_s *dev,
FAR const struct adc_callback_s *callback)
{
FAR struct max1161x_dev_s *priv =
(FAR struct max1161x_dev_s *)dev->ad_priv;
DEBUGASSERT(priv != NULL);
priv->cb = callback;
return OK;
}
/****************************************************************************
* Name: max1161x_reset
*
* Description:
* Reset the ADC device. Called early to initialize the hardware. This
* is called, before ao_setup() and on error conditions.
*
****************************************************************************/
static void max1161x_reset(FAR struct adc_dev_s *dev)
{
FAR struct max1161x_dev_s *priv =
(FAR struct max1161x_dev_s *)dev->ad_priv;
priv->setupbyte = MAX1161X_SETUP_MARKER;
priv->cmdbyte = MAX1161X_CMD_MARKER;
priv->chanstrobed = MAX1161X_CHANNELSTROBED;
#ifndef MAX1161X_ENABLE_SCAN
priv->cmdbyte &= ~(MAX1161X_CMD_SCAN_MASK);
priv->cmdbyte |= (MAX1161X_SCAN_NONE << MAX1161X_CMD_SCAN_SHIFT);
#endif
}
/****************************************************************************
* Name: max1161x_setup
*
* Description:
* Configure the ADC. This method is called the first time that the ADC
* device is opened. The MAX1161X is quite simple and nothing special is
* needed to be done.
*
****************************************************************************/
static int max1161x_setup(FAR struct adc_dev_s *dev)
{
return OK;
}
/****************************************************************************
* Name: max1161x_shutdown
*
* Description:
* Disable the ADC. This method is called when the ADC device is closed.
* This method should reverse the operation of the setup method, but as
* the MAX1161X is quite simple does not need to do anything.
*
****************************************************************************/
static void max1161x_shutdown(FAR struct adc_dev_s *dev)
{
}
/****************************************************************************
* Name: max1161x_rxint
*
* Description:
* Needed for ADC upper-half compatibility but conversion interrupts
* are not supported by the MAX1161X.
*
****************************************************************************/
static void max1161x_rxint(FAR struct adc_dev_s *dev, bool enable)
{
}
/****************************************************************************
* Name: max1161x_ioctl
*
* Description:
* All ioctl calls will be routed through this method
*
****************************************************************************/
static int max1161x_ioctl(FAR struct adc_dev_s *dev, int cmd,
unsigned long arg)
{
FAR struct max1161x_dev_s *priv =
(FAR struct max1161x_dev_s *)dev->ad_priv;
int ret = OK;
switch (cmd)
{
case ANIOC_TRIGGER:
{
struct adc_msg_s msg;
int i;
for (i = 0; (i < MAX1161X_NUM_CHANNELS) && (ret == OK); i++)
{
if ((priv->chanstrobed >> i) & 1u)
{
msg.am_channel = i;
ret = max1161x_readchannel(priv, &msg);
if (ret == OK)
{
priv->cb->au_receive(&g_adcdev, i, msg.am_data);
}
}
}
}
break;
/* Add a channel to list of channels read on ANIOC_TRIGGER */
case ANIOC_MAX1161X_ADD_CHAN:
{
ret = max1161x_manage_strobe(priv, (uint8_t)arg, true);
}
break;
/* Remove a channel from list of channels read on ANIOC_TRIGGER */
case ANIOC_MAX1161X_REMOVE_CHAN:
{
ret = max1161x_manage_strobe(priv, (uint8_t)arg, false);
}
break;
/* Read a single channel from the ADC */
case ANIOC_MAX1161X_READ_CHANNEL:
{
FAR struct adc_msg_s *msg = (FAR struct adc_msg_s *)arg;
ret = max1161x_readchannel(priv, msg);
}
break;
/* Set the ADC reference source and pin function */
case ANIOC_MAX1161X_SET_REF:
{
switch (arg)
{
case MAX1161X_REF_VDD_AIN_NC_OFF:
case MAX1161X_REF_EXT_RIN_IN_OFF:
case MAX1161X_REF_INT_AIN_NC_OFF:
case MAX1161X_REF_INT_AIN_NC_ON:
case MAX1161X_REF_INT_ROUT_OUT_OFF:
case MAX1161X_REF_INT_ROUT_OUT_ON:
{
priv->setupbyte &= ~(MAX1161X_SETUP_REF_MASK);
priv->setupbyte |= (arg << MAX1161X_SETUP_REF_SHIFT);
}
break;
default:
{
ret = -EINVAL;
}
break;
}
}
break;
/* Set clock source */
case ANIOC_MAX1161X_SET_CLOCK:
{
if (arg == MAX1161X_CLOCK_EXT)
{
priv->setupbyte |= MAX1161X_SETUP_CLK;
}
else if (arg == MAX1161X_CLOCK_INT)
{
priv->setupbyte &= ~MAX1161X_SETUP_CLK;
}
else
{
ret = -EINVAL;
}
}
break;
/* Set the ADC Unipolar/Bipolar Mode */
case ANIOC_MAX1161X_SET_UNIBIP:
{
if (arg == MAX1161X_BIPOLAR)
{
priv->setupbyte |= MAX1161X_SETUP_UNIBIP;
}
else if (arg == MAX1161X_UNIPOLAR)
{
priv->setupbyte &= ~MAX1161X_SETUP_UNIBIP;
}
else
{
ret = -EINVAL;
}
}
break;
/* Set the ADC Scan Mode */
case ANIOC_MAX1161X_SET_SCAN:
{
#ifdef MAX1161X_ENABLE_SCAN
switch (arg)
{
case MAX1161X_SCAN_FROM_ZERO :
case MAX1161X_SCAN_EIGHT_TIMES:
case MAX1161X_SCAN_UPPER:
case MAX1161X_SCAN_NONE:
{
priv->cmdbyte &= ~(MAX1161X_CMD_SCAN_MASK);
priv->cmdbyte |= (arg << MAX1161X_CMD_SCAN_SHIFT);
}
break;
default:
{
ret = -EINVAL;
}
break;
}
#endif
}
break;
/* Set the ADC Single Ended/Differential Mode */
case ANIOC_MAX1161X_SET_SNGDIF:
{
if (arg == MAX1161X_SINGLE_ENDED)
{
priv->cmdbyte |= MAX1161X_CMD_SNGDIF;
}
else if (arg == MAX1161X_DIFFERENTIAL)
{
priv->cmdbyte &= ~MAX1161X_CMD_SNGDIF;
}
else
{
ret = -EINVAL;
}
}
break;
/* Command was not recognized */
default:
ret = -ENOTTY;
aerr("MAX1161X ERROR: Unrecognized cmd: %d\n", cmd);
break;
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: max1161x_initialize
*
* Description:
* Initialize the selected adc
*
* Input Parameters:
* i2c - Pointer to a I2C master struct for the bus the ADC resides on.
*
* Returned Value:
* Valid ADC device structure reference on success; a NULL on failure
*
****************************************************************************/
FAR struct adc_dev_s *max1161x_initialize(FAR struct i2c_master_s *i2c)
{
DEBUGASSERT(i2c != NULL);
/* Driver state data */
FAR struct max1161x_dev_s *priv;
priv = (FAR struct max1161x_dev_s *)g_adcdev.ad_priv;
priv->cb = NULL;
priv->i2c = i2c;
priv->addr = MAX1161X_I2C_ADDR;
priv->setupbyte = MAX1161X_SETUP_MARKER;
priv->cmdbyte = MAX1161X_CMD_MARKER;
priv->chanstrobed = MAX1161X_CHANNELSTROBED;
#ifndef MAX1161X_ENABLE_SCAN
priv->cmdbyte &= ~(MAX1161X_CMD_SCAN_MASK);
priv->cmdbyte |= (MAX1161X_SCAN_NONE << MAX1161X_CMD_SCAN_SHIFT);
#endif
return &g_adcdev;
}
#endif
Reference in New Issue View Git Blame Copy Permalink