incubator-nuttx/configs/olimex-stm32-p207
Gregory Nutt e21212f2b4 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
..
include Added support for the Olimex STM32 P207 board. From Martin Lederhilger 2013-10-24 08:48:04 -06:00
nsh Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
scripts
src rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Kconfig
README.txt More trailing whilespace removal 2014-04-13 16:22:22 -06:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-P207 is assembled mainly
from the configurations stm32f4discovery and stm3240g-eval.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

The following peripherals are enabled in this configuration.
 - LEDs:       show the sytem status

 - Buttons:    TAMPER-button, WKUP-button, J1-Joystick (consists of RIGHT-,
               UP-, LEFT-, DOWN-, and CENTER-button). Built in app
               'buttons' works.

 - ADC:        ADC1 samples the red trim potentiometer AN_TR
               Built in app 'adc' works.

 - USB-FS-OTG: enabled but not really tested, since there is only a
               USB-A-connector (host) connected to the full speed µC inputs.
               The other connector (device) is connected to the high speed µC
               inputs, but it seems that NuttX has currently no driver
               for it.

 - CAN:        Built in app 'can' works, but appart from that not really tested.

 - Ethernet:   Ping to other station on the network works.