bd3ef36eda
-------
This patch enhances networking support for the simulation under Linux.
Includes updated support for Linux TUN/TAP, and the addition of support for
Linux bridge devices.
CHANGES
-------
o Check to see if the d_txavail callback is present before calling it in
the arp send code. This prevents a segfault when simulating the telnetd
daemon with arp send enabled.
o Adjust the simulation's netdriver_loop() so it will detect and respond to
ARP requests.
o Do not attempt to take the tap device's hardware address for use by the
simulation. That hardware address belongs to the host end of the link,
not the simulation end. Generate a randomized MAC address instead.
o Do not assign an IP address to the interface on the host side of the TAP
link.
+ Provide two modes: "host route" and "bridge".
+ In host route mode, maintain a host route that points any traffic for the
simulation's IP address to the tap device. In this mode, so long as the
simulation's IP is a free address in the same subnet as the host, no
additional configuration will be required to talk to it from the host.
Note that address changes are handled automatically if they follow the
rule of if-down/set-address/if-up, which everything seems to.
+ In bridge mode, add the tap device to the specified bridge instance. See
configs/sim/NETWORK-LINUX.txt for information and usage examples. This
enables much more flexible configurations (with fewer headaches), such as
running multiple simulations on a single host, all of which can access
the network the host is connected to.
o Refresh configurations in configs/sim where CONFIG_NET=y. They default
to "host route" mode.
o Add configs/sim/NETWORK-LINUX.txt
CAVEATS
-------
- The MAC address generation code is extremely simplistic, and does not
check for potential conflicts on the network. Probably not an issue, but
something to be aware of.
- I was careful to leave it in a state where Cygwin/pcap should still work,
but I don't have a Windows environment to test in. This should be
checked.
- I don't know if this was ever intended to work with OS X. I didn't even
try to test it there.
NOTES
-----
- Was able to get telnetd working and simulate nsh over telnet, but only so
long as listen backlogs were disabled.
There appears to be a bug in the backlog code where sockets are being
returned in SYN_RCVD state instead of waiting until they're ESTABLISHED;
if you perform an immediate send after accepting the connection, it will
confuse the stack and the send will hang; additionally, the connection
will never reach ESTABLISHED state.
Can be worked around by adding a sleep(1) after the accept in telnetd. I
don't have the necessary knowledge of the IP stack to know what the
correct fix is.
|
||
|---|---|---|
| .. | ||
| 6lowpan | ||
| arp | ||
| devif | ||
| icmp | ||
| icmpv6 | ||
| igmp | ||
| iob | ||
| local | ||
| loopback | ||
| neighbor | ||
| netdev | ||
| pkt | ||
| procfs | ||
| route | ||
| socket | ||
| tcp | ||
| udp | ||
| utils | ||
| .gitignore | ||
| Kconfig | ||
| Makefile | ||
| README.txt | ||
| net_initialize.c | ||
README.txt
README
======
Directory Structure
===================
nuttx/
|
`- net/
|
+- arp - Address resolution protocol (IPv4)
+- devif - Stack/device interface layer
+- icmp - Internet Control Message Protocol (IPv4)
+- icmpv6 - Internet Control Message Protocol (IPv6)
+- iob - I/O buffering logic
+- local - Unix domain (local) sockets
+- loopback - Local loopback
+- neighbor - Neighbor Discovery Protocol (IPv6)
+- netdev - Socket network device interface
+- pkt - "Raw" packet socket support
+- socket - BSD socket interface
+- route - Routing table support
+- tcp - Transmission Control Protocol
+- udp - User Datagram Protocol
`- utils - Miscellaneous utility functions
+----------------------------------------------------------------+
| Application layer |
+----------------------------------------------------------------+
+----------------------------------------------------------------+
| Socket layer (socket/) |
+----------------------------------------------------------------+
+------------++--------------------------------------------------+
| Network || Protocol stacks (arp, ipv6, icmp, pkt, tcp, udp) |
| Device |+--------------------------------------------------+
| Interface |+------------------------------------++------------+
| (netdev/) || Network Device Interface (devif/) || Utilities |
+------------++------------------------------------++------------+
+----------------------------------------------------------------+
| Network Device Drivers |
+----------------------------------------------------------------+