OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/drivers/bch/bchdev_driver.c

521 lines
13 KiB
C
Raw Blame History

/****************************************************************************
* drivers/bch/bchdev_driver.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <sched.h>
#include <errno.h>
#include <poll.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/fs/fs.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/drivers/drivers.h>
#include "bch.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int bch_open(FAR struct file *filep);
static int bch_close(FAR struct file *filep);
static off_t bch_seek(FAR struct file *filep, off_t offset, int whence);
static ssize_t bch_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static ssize_t bch_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int bch_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
static int bch_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup);
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
static int bch_unlink(FAR struct inode *inode);
#endif
/****************************************************************************
* Public Data
****************************************************************************/
const struct file_operations bch_fops =
{
bch_open, /* open */
bch_close, /* close */
bch_read, /* read */
bch_write, /* write */
bch_seek, /* seek */
bch_ioctl, /* ioctl */
bch_poll /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, bch_unlink /* unlink */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: bch_poll
****************************************************************************/
static int bch_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup)
{
if (setup)
{
poll_notify(&fds, 1, POLLIN | POLLOUT);
}
return OK;
}
/****************************************************************************
* Name: bch_open
*
* Description: Open the block device
*
****************************************************************************/
static int bch_open(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct bchlib_s *bch;
int ret = OK;
DEBUGASSERT(inode && inode->i_private);
bch = (FAR struct bchlib_s *)inode->i_private;
/* Increment the reference count */
ret = nxmutex_lock(&bch->lock);
if (ret < 0)
{
return ret;
}
if (bch->refs == MAX_OPENCNT)
{
ret = -EMFILE;
}
else
{
bch->refs++;
}
nxmutex_unlock(&bch->lock);
return ret;
}
/****************************************************************************
* Name: bch_close
*
* Description: close the block device
*
****************************************************************************/
static int bch_close(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct bchlib_s *bch;
int ret = OK;
DEBUGASSERT(inode && inode->i_private);
bch = (FAR struct bchlib_s *)inode->i_private;
/* Get exclusive access */
ret = nxmutex_lock(&bch->lock);
if (ret < 0)
{
return ret;
}
/* Flush any dirty pages remaining in the cache */
bchlib_flushsector(bch);
/* Decrement the reference count (I don't use bchlib_decref() because I
* want the entire close operation to be atomic wrt other driver
* operations.
*/
if (bch->refs == 0)
{
ret = -EIO;
}
else
{
bch->refs--;
/* If the reference count decremented to zero AND if the character
* driver has been unlinked, then teardown the BCH device now.
*/
if (bch->refs == 0 && bch->unlinked)
{
/* Tear the driver down now. */
ret = bchlib_teardown((FAR void *)bch);
/* bchlib_teardown() would only fail if there are outstanding
* references on the device. Since we know that is not true, it
* should not fail at all.
*/
DEBUGASSERT(ret >= 0);
if (ret >= 0)
{
/* Return without releasing the stale semaphore */
return OK;
}
}
}
nxmutex_unlock(&bch->lock);
return ret;
}
/****************************************************************************
* Name: bch_seek
****************************************************************************/
static off_t bch_seek(FAR struct file *filep, off_t offset, int whence)
{
FAR struct inode *inode = filep->f_inode;
FAR struct bchlib_s *bch;
off_t newpos;
off_t ret;
DEBUGASSERT(inode && inode->i_private);
bch = (FAR struct bchlib_s *)inode->i_private;
ret = nxmutex_lock(&bch->lock);
if (ret < 0)
{
return ret;
}
/* Determine the new, requested file position */
switch (whence)
{
case SEEK_CUR:
newpos = filep->f_pos + offset;
break;
case SEEK_SET:
newpos = offset;
break;
case SEEK_END:
newpos = bch->sectsize * bch->nsectors + offset;
break;
default:
/* Return EINVAL if the whence argument is invalid */
nxmutex_unlock(&bch->lock);
return -EINVAL;
}
/* Opengroup.org:
*
* "The lseek() function shall allow the file offset to be set beyond the
* end of the existing data in the file. If data is later written at this
* point, subsequent reads of data in the gap shall return bytes with the
* value 0 until data is actually written into the gap."
*
* We can conform to the first part, but not the second. But return -EINVAL
* if:
*
* "...the resulting file offset would be negative for a regular file,
* block special file, or directory."
*/
if (newpos >= 0)
{
filep->f_pos = newpos;
ret = newpos;
}
else
{
ret = -EINVAL;
}
nxmutex_unlock(&bch->lock);
return ret;
}
/****************************************************************************
* Name: bch_read
****************************************************************************/
static ssize_t bch_read(FAR struct file *filep, FAR char *buffer, size_t len)
{
FAR struct inode *inode = filep->f_inode;
FAR struct bchlib_s *bch;
ssize_t ret;
DEBUGASSERT(inode && inode->i_private);
bch = (FAR struct bchlib_s *)inode->i_private;
ret = nxmutex_lock(&bch->lock);
if (ret < 0)
{
return ret;
}
ret = bchlib_read(bch, buffer, filep->f_pos, len);
if (ret > 0)
{
filep->f_pos += ret;
}
nxmutex_unlock(&bch->lock);
return ret;
}
/****************************************************************************
* Name: bch_write
****************************************************************************/
static ssize_t bch_write(FAR struct file *filep, FAR const char *buffer,
size_t len)
{
FAR struct inode *inode = filep->f_inode;
FAR struct bchlib_s *bch;
ssize_t ret = -EACCES;
DEBUGASSERT(inode && inode->i_private);
bch = (FAR struct bchlib_s *)inode->i_private;
if (!bch->readonly)
{
ret = nxmutex_lock(&bch->lock);
if (ret < 0)
{
return ret;
}
ret = bchlib_write(bch, buffer, filep->f_pos, len);
if (ret > 0)
{
filep->f_pos += ret;
}
nxmutex_unlock(&bch->lock);
}
return ret;
}
/****************************************************************************
* Name: bch_ioctl
*
* Description:
* Handle IOCTL commands
*
****************************************************************************/
static int bch_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode = filep->f_inode;
FAR struct bchlib_s *bch;
int ret = -ENOTTY;
DEBUGASSERT(inode && inode->i_private);
bch = (FAR struct bchlib_s *)inode->i_private;
/* Process the call according to the command */
switch (cmd)
{
/* This isa request to get the private data structure */
case DIOC_GETPRIV:
{
FAR struct bchlib_s **bchr =
(FAR struct bchlib_s **)((uintptr_t)arg);
ret = nxmutex_lock(&bch->lock);
if (ret < 0)
{
return ret;
}
if (!bchr || bch->refs == MAX_OPENCNT)
{
ret = -EINVAL;
}
else
{
bch->refs++;
*bchr = bch;
ret = OK;
}
nxmutex_unlock(&bch->lock);
}
break;
/* This is a required to return the geometry of the underlying block
* driver.
*/
case BIOC_GEOMETRY:
{
FAR struct geometry *geo = (FAR struct geometry *)((uintptr_t)arg);
DEBUGASSERT(geo != NULL && bch->inode && bch->inode->u.i_bops &&
bch->inode->u.i_bops->geometry);
ret = bch->inode->u.i_bops->geometry(bch->inode, geo);
if (ret < 0)
{
ferr("ERROR: geometry failed: %d\n", -ret);
}
else if (!geo->geo_available)
{
ferr("ERROR: geometry failed: %d\n", -ret);
ret = -ENODEV;
}
}
break;
case BIOC_FLUSH:
{
/* Flush any dirty pages remaining in the cache */
ret = bchlib_flushsector(bch);
}
break;
#ifdef CONFIG_BCH_ENCRYPTION
/* This is a request to set the encryption key? */
case DIOC_SETKEY:
{
memcpy(bch->key, (FAR void *)arg, CONFIG_BCH_ENCRYPTION_KEY_SIZE);
ret = OK;
}
break;
#endif
/* Otherwise, pass the IOCTL command on to the contained block
* driver.
*/
default:
{
FAR struct inode *bchinode = bch->inode;
/* Does the block driver support the ioctl method? */
if (bchinode->u.i_bops->ioctl != NULL)
{
ret = bchinode->u.i_bops->ioctl(bchinode, cmd, arg);
}
}
break;
}
return ret;
}
/****************************************************************************
* Name: bch_unlink
*
* Handle unlinking of the BCH device
*
****************************************************************************/
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
static int bch_unlink(FAR struct inode *inode)
{
FAR struct bchlib_s *bch;
int ret = OK;
DEBUGASSERT(inode && inode->i_private);
bch = (FAR struct bchlib_s *)inode->i_private;
/* Get exclusive access to the BCH device */
ret = nxmutex_lock(&bch->lock);
if (ret < 0)
{
return ret;
}
/* Indicate that the driver has been unlinked */
bch->unlinked = true;
/* If there are no open references to the driver then teardown the BCH
* device now.
*/
if (bch->refs == 0)
{
/* Tear the driver down now. */
ret = bchlib_teardown((FAR void *)bch);
/* bchlib_teardown() would only fail if there are outstanding
* references on the device. Since we know that is not true, it
* should not fail at all.
*/
DEBUGASSERT(ret >= 0);
if (ret >= 0)
{
/* Return without releasing the stale semaphore */
return OK;
}
}
nxmutex_unlock(&bch->lock);
return ret;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
Reference in New Issue View Git Blame Copy Permalink