incubator-nuttx/drivers/analog/dac7571.c

263 lines
8.0 KiB
C

/****************************************************************************
* drivers/analog/dac7571.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/analog/dac.h>
#include <nuttx/i2c/i2c_master.h>
/****************************************************************************
* Preprocessor definitions
****************************************************************************/
#if !defined(CONFIG_I2C)
# error I2C Support Required.
#endif
#if defined(CONFIG_DAC7571)
/* Operating modes - not controllable by user */
#define DAC7571_CONFIG_OPMODE_SHIFT 4
#define DAC7571_CONFIG_OPMODE_MASK (0x0F << DAC7571_CONFIG_OPMODE_SHIFT)
#define DAC7571_CONFIG_OPMODE_NORMAL (0 << DAC7571_CONFIG_OPMODE_SHIFT)
#define DAC7571_CONFIG_OPMODE_1K_PWD (1 << DAC7571_CONFIG_OPMODE_SHIFT)
#define DAC7571_CONFIG_OPMODE_100K_PWD (2 << DAC7571_CONFIG_OPMODE_SHIFT)
#define DAC7571_CONFIG_OPMODE_HZ_PWD (3 << DAC7571_CONFIG_OPMODE_SHIFT)
#ifndef CONFIG_DAC7571_I2C_FREQUENCY
# define CONFIG_DAC7571_I2C_FREQUENCY 400000
#endif
#define I2C_NOSTARTSTOP_MSGS 2
#define I2C_NOSTARTSTOP_ADDRESS_MSG_INDEX 0
#define I2C_NOSTARTSTOP_DATA_MSG_INDEX 1
/****************************************************************************
* Private Types
****************************************************************************/
struct dac7571_dev_s
{
FAR struct i2c_master_s *i2c; /* I2C interface */
uint8_t addr; /* I2C address */
uint16_t state; /* DAC7571 current state */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* I2C Helpers */
/* DAC methods */
static void dac7571_reset(FAR struct dac_dev_s *dev);
static int dac7571_setup(FAR struct dac_dev_s *dev);
static void dac7571_shutdown(FAR struct dac_dev_s *dev);
static void dac7571_txint(FAR struct dac_dev_s *dev, bool enable);
static int dac7571_send(FAR struct dac_dev_s *dev,
FAR struct dac_msg_s *msg);
static int dac7571_ioctl(FAR struct dac_dev_s *dev, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static struct dac7571_dev_s g_dacpriv;
static const struct dac_ops_s g_dacops =
{
.ao_reset = dac7571_reset,
.ao_setup = dac7571_setup,
.ao_shutdown = dac7571_shutdown,
.ao_txint = dac7571_txint,
.ao_send = dac7571_send,
.ao_ioctl = dac7571_ioctl,
};
static struct dac_dev_s g_dacdev =
{
.ad_ops = &g_dacops,
.ad_priv = &g_dacpriv,
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: dac7571_reset
*
* Description:
* Reset the DAC device. Called early to initialize the hardware. This
* is called, before ao_setup() and on error conditions.
*
****************************************************************************/
static void dac7571_reset(FAR struct dac_dev_s *dev)
{
}
/****************************************************************************
* Name: dac7571_setup
*
* Description:
* Configure the DAC. This method is called the first time that the DAC
* device is opened. This will occur when the port is first opened.
* This setup includes configuring and attaching DAC interrupts. Interrupts
* are all disabled upon return.
*
****************************************************************************/
static int dac7571_setup(FAR struct dac_dev_s *dev)
{
return OK;
}
/****************************************************************************
* Name: dac7571_shutdown
*
* Description:
* Disable the DAC. This method is called when the DAC device is closed.
* This method reverses the operation the setup method.
*
****************************************************************************/
static void dac7571_shutdown(FAR struct dac_dev_s *dev)
{
}
/****************************************************************************
* Name: dac7571_txint
*
* Description:
* Call to enable or disable TX interrupts
*
****************************************************************************/
static void dac7571_txint(FAR struct dac_dev_s *dev, bool enable)
{
}
/****************************************************************************
* Name: dac7571_send
****************************************************************************/
static int dac7571_send(FAR struct dac_dev_s *dev, FAR struct dac_msg_s *msg)
{
FAR struct dac7571_dev_s *priv = (FAR struct dac7571_dev_s *)dev->ad_priv;
struct i2c_config_s config;
int ret;
/* Sanity check */
DEBUGASSERT(priv->i2c != NULL);
/* Set up message to send */
ainfo("value: %08x\n", msg->am_data);
uint8_t const BUFFER_SIZE = 2;
uint8_t buffer[BUFFER_SIZE];
buffer[0] = (uint8_t)(msg->am_data >> 8);
buffer[0] &= ~(DAC7571_CONFIG_OPMODE_MASK); /* only normal op mode supported */
buffer[1] = (uint8_t)(msg->am_data);
/* Set up the I2C configuration */
config.frequency = CONFIG_DAC7571_I2C_FREQUENCY;
config.address = priv->addr;
config.addrlen = 7;
/* Then perform the transfer. */
ret = i2c_write(priv->i2c, &config, buffer, BUFFER_SIZE);
if (ret < 0)
{
aerr("ERROR: dac7571_send failed code:%d\n", ret);
}
dac_txdone(&g_dacdev);
return ret;
}
/****************************************************************************
* Name: dac7571_ioctl
****************************************************************************/
static int dac7571_ioctl(FAR struct dac_dev_s *dev, int cmd,
unsigned long arg)
{
return -ENOTTY;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: dac7571_initialize
*
* Description:
* Initialize DAC
*
* Input Parameters:
* Port number (for hardware that has multiple DAC interfaces)
*
* Returned Value:
* Valid DAC7571 device structure reference on success; a NULL on failure
*
****************************************************************************/
FAR struct dac_dev_s *dac7571_initialize(FAR struct i2c_master_s *i2c,
uint8_t addr)
{
FAR struct dac7571_dev_s *priv;
/* Sanity check */
DEBUGASSERT(i2c != NULL);
/* Initialize the DAC7571 device structure */
priv = (FAR struct dac7571_dev_s *)g_dacdev.ad_priv;
priv->i2c = i2c;
priv->addr = addr;
return &g_dacdev;
}
#endif /* CONFIG_DAC7571 */