190 lines
5.5 KiB
ReStructuredText
190 lines
5.5 KiB
ReStructuredText
.. include:: /substitutions.rst
|
|
.. _simulator:
|
|
|
|
Simulator
|
|
=========
|
|
|
|
Apache NuttX has a simulator that can run as a regular program on Linux, Mac, and Windows computers.
|
|
It's useful for debugging operating system features that aren't associated with particular
|
|
device drivers— for instance the TCP/IP stack itself, a web interface or API for your
|
|
application, or other communication protocols. It's also handy for trying out Apache NuttX without
|
|
having a piece of embedded hardware.
|
|
|
|
This guide assumes you're on Linux. It works on Windows and Mac too— if you know how,
|
|
submit a PR to improve this guide!
|
|
|
|
.. todo:: Add Mac and Windows instructions
|
|
|
|
Compiling
|
|
---------
|
|
|
|
#. Configure the Simulator
|
|
|
|
There are a lot of simulator configurations available that set you up to test various
|
|
operating system features.
|
|
|
|
Here we'll use the ``sim:nsh`` basic NuttX Shell configuration.
|
|
|
|
.. code-block:: console
|
|
|
|
$ cd nuttx
|
|
$ ./tools/configure.sh sim:nsh
|
|
|
|
#. Compile
|
|
|
|
.. code-block:: console
|
|
|
|
$ make
|
|
|
|
#. Run the simulator:
|
|
|
|
.. code-block:: console
|
|
|
|
$ ./nuttx
|
|
login: admin
|
|
password: Administrator
|
|
User Logged-in!
|
|
|
|
NuttShell (NSH) NuttX-9.1.0
|
|
MOTD: username=admin password=Administrator
|
|
nsh> help
|
|
help usage: help [-v] [<cmd>]
|
|
|
|
[ cp exit losetup mv rmdir true
|
|
? cmp false ls mw set uname
|
|
basename dirname free mb poweroff sh unset
|
|
break dd help mkdir ps sleep usleep
|
|
cat echo hexdump mkfatfs pwd test xd
|
|
cd exec kill mh rm time
|
|
|
|
Builtin Apps:
|
|
hello nsh
|
|
|
|
nsh>
|
|
|
|
#. Stop the simulator:
|
|
|
|
.. code-block:: console
|
|
|
|
nsh> poweroff
|
|
$
|
|
$ # we're back at the Linux prompt.
|
|
|
|
Accessing the Network
|
|
---------------------
|
|
|
|
#. Here we'll use the ``sim:tcpblaster`` configuration because it comes with networking
|
|
that is ready to use.
|
|
|
|
.. code-block:: console
|
|
|
|
$ make distclean
|
|
$ ./tools/configure.sh sim:tcpblaster
|
|
$ make
|
|
|
|
#. Give the Simulator Privileges
|
|
|
|
On recent Linux distributions, you need to give the ``nuttx`` program the capabilities
|
|
(similar to permissions) to access the network:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo setcap cap_net_admin+ep ./nuttx
|
|
|
|
#. Run the simulator:
|
|
|
|
.. code-block:: console
|
|
|
|
$ ./nuttx
|
|
|
|
#. Bring Up the Network Interfaces
|
|
|
|
On Apache NuttX:
|
|
|
|
.. code-block:: console
|
|
|
|
nsh> ifup eth0
|
|
|
|
On Linux, first you need to find your main network interface— this will usually either
|
|
be an ethernet or wireless network adapter. Do this:
|
|
|
|
.. code-block:: console
|
|
|
|
$ ifconfig
|
|
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
|
|
inet 127.0.0.1 netmask 255.0.0.0
|
|
inet6 ::1 prefixlen 128 scopeid 0x10<host>
|
|
loop txqueuelen 1000 (Local Loopback)
|
|
RX packets 5846 bytes 614351 (614.3 KB)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 5846 bytes 614351 (614.3 KB)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
wlp0s20f3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
|
|
inet 192.168.1.209 netmask 255.255.255.0 broadcast 192.168.1.255
|
|
inet6 fe80::1161:c26b:af05:d784 prefixlen 64 scopeid 0x20<link>
|
|
ether 24:41:8c:a8:30:d1 txqueuelen 1000 (Ethernet)
|
|
RX packets 219369 bytes 176416490 (176.4 MB)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 108399 bytes 27213617 (27.2 MB)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
``lo0`` is the Loopback Interface, so ``wlp0s20f3`` is the wireless interface. Note
|
|
that it has an IP address on the local net. There may be other interfaces listed, you'll
|
|
need to pick the one that's right for your system.
|
|
|
|
Then, on Linux do this to set up the tap network interface and route that will let
|
|
the Apache NuttX simulator access the network:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo ./tools/simhostroute.sh wlp0s20f3 on
|
|
$ ping -c 1 10.0.1.2 # nuttx system
|
|
PING 10.0.1.2 (10.0.1.2) 56(84) bytes of data.
|
|
64 bytes from 10.0.1.2: icmp_seq=1 ttl=64 time=7.52 ms
|
|
|
|
--- 10.0.1.2 ping statistics ---
|
|
1 packets transmitted, 1 received, 0% packet loss, time 0ms
|
|
rtt min/avg/max/mdev = 7.529/7.529/7.529/0.000 m
|
|
|
|
#. Test that Apache NuttX can access the Internet
|
|
|
|
First let's ping the network interface of our Linux host to prove we can see the
|
|
gateway to the Internet:
|
|
|
|
.. code-block:: console
|
|
|
|
nsh> ping -c 1 10.0.1.1
|
|
nsh> ping -c 1 10.0.1.1
|
|
PING 10.0.1.1 56 bytes of data
|
|
56 bytes from 10.0.1.1: icmp_seq=0 time=0 ms
|
|
1 packets transmitted, 1 received, 0% packet loss, time 1010 ms
|
|
|
|
Now let's ping one of Google's DNS servers to prove we can access the rest of the
|
|
Internet:
|
|
|
|
.. code-block:: console
|
|
|
|
nsh> ping -c 1 8.8.8.8
|
|
PING 8.8.8.8 56 bytes of data
|
|
56 bytes from 8.8.8.8: icmp_seq=0 time=10 ms
|
|
1 packets transmitted, 1 received, 0% packet loss, time 1010 ms
|
|
|
|
Success!
|
|
|
|
Stopping
|
|
--------
|
|
|
|
If you don't have an nsh prompt, the only effective way to stop the simulator is kill it from another terminal:
|
|
|
|
.. code-block:: console
|
|
|
|
$ pkill nuttx
|
|
|
|
|
|
|
|
Debugging
|
|
---------
|
|
|
|
You can debug the simulator like any regular Linux program.
|