compal_e86
==========
This directory contains the board support for compal e86 phones. This port
is tested on the following phone:
* motorola c139 (compal e86) with flash configuration
This port is based on patches contributed by Denis Carikli for both the
compal e99 and e88. At the time of initial check-in, the following phones
were tested:
* motorolla c155 (compal e99) with the compalram and highram configuration
* motorolla W220 (compal e88)
* The openmoko freerunner baseband(compal e88)
The patches were made by Alan Carvalho de Assis and Denis Carikli using
the Stefan Richter's patches that can be found here:
http://cgit.osmocom.org/cgit/nuttx-bb/log/?h=lputt%2Ftesting
Osmocom-BB Dependencies and Sercomm
===================================
The build environment assumes that you have the osmocom-bb project
directory at same level as the nuttx project:
|- nuttx
|- apps
`- osmocom-bb
If you attempt to build this configuration without osmocom-bb, and that
you added support for sercomm in your configuration(CONFIG_SERCOMM_CONSOLE=y)
you will get compilation errors in drivers/sercomm due to header files that
are needed from the osmocom-bb directory.
By default, NuttX will not use sercomm (HDLC protocol) to communicate with
the host system. Sercomm is the transport used by osmocom-bb that runs on top
of serial. See http://bb.osmocom.org/trac/wiki/nuttx-bb/run for detailed
the usage of nuttx with sercomm.
Running NuttX From Flash
========================
Flash layout:
0x00000 - 0x02000 - original compal loader
0x02000 - 0x10000 - simple binary to jump to 0x10000 (jumper.e86loader.bin)
0x10000 - ??? - NuttX binary (nuttx.bin)
Using osmocon/osmoload, retrieve the compal loader, flash it and the
jumper.e86loader.bin as well as nuttx.bin.
The jumper app is a modified version of the menu app in osmocom-bb, branch
jolly/menu. The app disabled irqs (setup by compal loader?) and jumps to
0x10000. This app is submitted as a patch to osmocom-bb mailing list.
Loading NuttX (highram)
=======================
The osmocom-bb wiki describes how to load NuttX. See
http://bb.osmocom.org/trac/wiki/nuttx-bb for detailed information.
The way that nuttx is loaded depends on the configuration (highram/compalram)
and phone:
o compalram is for the ramloader(for phone having a bootloader on flash)
o highram is for phones having the romloader(if the phone has a bootrom)
or for loading in the ram trough a special loader(loaded first on ram
by talking to the ramloader) when having a ramloader(which can only
load 64k).
be0e926730