1554 lines
42 KiB
C
1554 lines
42 KiB
C
/****************************************************************************
|
|
* drivers/analog/lmp92001.c
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <stdio.h>
|
|
#include <sys/types.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include <assert.h>
|
|
#include <errno.h>
|
|
#include <debug.h>
|
|
|
|
#include <nuttx/arch.h>
|
|
#include <nuttx/analog/adc.h>
|
|
#include <nuttx/analog/dac.h>
|
|
#include <nuttx/ioexpander/ioexpander.h>
|
|
#include <nuttx/i2c/i2c_master.h>
|
|
|
|
#include <nuttx/analog/lmp92001.h>
|
|
|
|
/****************************************************************************
|
|
* Preprocessor definitions
|
|
****************************************************************************/
|
|
|
|
#if !defined(CONFIG_I2C)
|
|
# error I2C Support Required.
|
|
#endif
|
|
|
|
#if defined(CONFIG_LMP92001)
|
|
|
|
#define LMP92001_REG_TEST 0x01u
|
|
|
|
#define LMP92001_REG_ID 0x0eu
|
|
#define LMP92001_REG_VER 0x0fu
|
|
|
|
#define LMP92001_REG_SGEN 0x10u
|
|
#define LMP92001_REG_SGPI 0x11u
|
|
#define LMP92001_REG_SHIL 0x12u
|
|
#define LMP92001_REG_SLOL 0x13u
|
|
|
|
#define LMP92001_REG_CGEN 0x14u
|
|
#define LMP92001_REG_CDAC 0x15u
|
|
#define LMP92001_REG_CGPO 0x16u
|
|
#define LMP92001_REG_CINH 0x17u
|
|
#define LMP92001_REG_CINL 0x18u
|
|
#define LMP92001_REG_CAD1 0x19u
|
|
#define LMP92001_REG_CAD2 0x1au
|
|
#define LMP92001_REG_CAD3 0x1bu
|
|
#define LMP92001_REG_CTRIG 0x1cu
|
|
|
|
#define LMP92001_REG_ADC1 0x20u
|
|
#define LMP92001_REG_ADC2 0x21u
|
|
#define LMP92001_REG_ADC3 0x22u
|
|
#define LMP92001_REG_ADC4 0x23u
|
|
#define LMP92001_REG_ADC5 0x24u
|
|
#define LMP92001_REG_ADC6 0x25u
|
|
#define LMP92001_REG_ADC7 0x26u
|
|
#define LMP92001_REG_ADC8 0x27u
|
|
#define LMP92001_REG_ADC9 0x28u
|
|
#define LMP92001_REG_ADC10 0x29u
|
|
#define LMP92001_REG_ADC11 0x2au
|
|
#define LMP92001_REG_ADC12 0x2bu
|
|
#define LMP92001_REG_ADC13 0x2cu
|
|
#define LMP92001_REG_ADC14 0x2du
|
|
#define LMP92001_REG_ADC15 0x2eu
|
|
#define LMP92001_REG_ADC16 0x2fu
|
|
#define LMP92001_REG_ADC17 0x30u
|
|
|
|
#define LMP92001_REG_LIH1 0x40u
|
|
#define LMP92001_REG_LIH2 0x41u
|
|
#define LMP92001_REG_LIH3 0x42u
|
|
#define LMP92001_REG_LIH9 0x43u
|
|
#define LMP92001_REG_LIH10 0x44u
|
|
#define LMP92001_REG_LIH11 0x45u
|
|
#define LMP92001_REG_LIL1 0x46u
|
|
#define LMP92001_REG_LIL2 0x47u
|
|
#define LMP92001_REG_LIL3 0x48u
|
|
#define LMP92001_REG_LIL9 0x49u
|
|
#define LMP92001_REG_LIL10 0x4au
|
|
#define LMP92001_REG_LIL11 0x4bu
|
|
|
|
#define LMP92001_REG_CREF 0x66u
|
|
|
|
#define LMP92001_REG_DAC1 0x80u
|
|
#define LMP92001_REG_DAC2 0x81u
|
|
#define LMP92001_REG_DAC3 0x82u
|
|
#define LMP92001_REG_DAC4 0x83u
|
|
#define LMP92001_REG_DAC5 0x84u
|
|
#define LMP92001_REG_DAC6 0x85u
|
|
#define LMP92001_REG_DAC7 0x86u
|
|
#define LMP92001_REG_DAC8 0x87u
|
|
#define LMP92001_REG_DAC9 0x88u
|
|
#define LMP92001_REG_DAC10 0x89u
|
|
#define LMP92001_REG_DAC11 0x8au
|
|
#define LMP92001_REG_DAC12 0x8bu
|
|
|
|
#define LMP92001_REG_DALL 0x90u
|
|
|
|
#define LMP92001_REG_BLK0 0xf0u
|
|
#define LMP92001_REG_BLK1 0xf1u
|
|
#define LMP92001_REG_BLK2 0xf2u
|
|
#define LMP92001_REG_BLK3 0xf3u
|
|
#define LMP92001_REG_BLK4 0xf4u
|
|
#define LMP92001_REG_BLK5 0xf5u
|
|
|
|
#define LMP92001_SGEN_BUSY (1 << 7u)
|
|
#define LMP92001_SGEN_RDYN (1 << 6u)
|
|
#define LMP92001_SGEN_HV (1 << 2u)
|
|
#define LMP92001_SGEN_LV (1 << 1u)
|
|
#define LMP92001_SGEN_GPI (1 << 0u)
|
|
|
|
#define LMP92001_SGPI_GPI7 (1 << 7u)
|
|
#define LMP92001_SGPI_GPI6 (1 << 6u)
|
|
#define LMP92001_SGPI_GPI5 (1 << 5u)
|
|
#define LMP92001_SGPI_GPI4 (1 << 4u)
|
|
#define LMP92001_SGPI_GPI3 (1 << 3u)
|
|
#define LMP92001_SGPI_GPI2 (1 << 2u)
|
|
#define LMP92001_SGPI_GPI1 (1 << 1u)
|
|
#define LMP92001_SGPI_GPI0 (1 << 0u)
|
|
|
|
#define LMP92001_CGEN_RST (1 << 7u)
|
|
#define LMP92001_CGEN_TOD (1 << 2u)
|
|
#define LMP92001_CGEN_LCK (1 << 1u)
|
|
#define LMP92001_CGEN_STRT (1 << 0u)
|
|
|
|
#define LMP92001_CDAC_GANG (1 << 2u)
|
|
#define LMP92001_CDAC_OLVL (1 << 1u)
|
|
#define LMP92001_CDAC_OFF (1 << 0u)
|
|
#define LMP92001_CDAC_ON (0u)
|
|
|
|
#define LMP92001_CGPO_GPO7 (1 << 7u)
|
|
#define LMP92001_CGPO_GPO6 (1 << 6u)
|
|
#define LMP92001_CGPO_GPO5 (1 << 5u)
|
|
#define LMP92001_CGPO_GPO4 (1 << 4u)
|
|
#define LMP92001_CGPO_GPO3 (1 << 3u)
|
|
#define LMP92001_CGPO_GPO2 (1 << 2u)
|
|
#define LMP92001_CGPO_GPO1 (1 << 1u)
|
|
#define LMP92001_CGPO_GPO0 (1 << 0u)
|
|
|
|
#define LMP92001_CTRIG_SNGL (1 << 0u)
|
|
|
|
#define LMP92001_CREF_AEXT (1 << 2u)
|
|
#define LMP92001_CREF_DEXT (1 << 1u)
|
|
|
|
#define LMP92001_ADC_MAX_CHANNELS 17u
|
|
#define LMP92001_DAC_MAX_CHANNELS 12u
|
|
#define LMP92001_GPIO_MAX_PINS 8u
|
|
|
|
/****************************************************************************
|
|
* Private Types
|
|
****************************************************************************/
|
|
|
|
struct lmp92001_dev_s
|
|
{
|
|
FAR struct i2c_master_s *i2c; /* I2C interface */
|
|
uint8_t addr; /* I2C address */
|
|
|
|
#ifdef CONFIG_ADC
|
|
FAR const struct adc_callback_s *cb;
|
|
uint8_t adc_channels_enabled;
|
|
uint8_t adc_channels[LMP92001_ADC_MAX_CHANNELS];
|
|
#endif
|
|
|
|
#ifdef CONFIG_IOEXPANDER
|
|
struct ioexpander_dev_s gpio_dev;
|
|
#endif
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Private Function Prototypes
|
|
****************************************************************************/
|
|
|
|
/* LMP92001 Helpers. */
|
|
|
|
static int lmp92001_i2c_write(FAR struct lmp92001_dev_s *priv,
|
|
FAR const uint8_t *buffer, int buflen);
|
|
static int lmp92001_i2c_read(FAR struct lmp92001_dev_s *priv,
|
|
uint8_t reg, FAR uint8_t *buffer, int buflen);
|
|
|
|
static int lmp92001_dac_setref(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_ref_e ref);
|
|
static int lmp92001_dac_updateall(FAR struct lmp92001_dev_s *priv,
|
|
uint16_t value);
|
|
|
|
static int lmp92001_adc_setref(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_ref_e ref);
|
|
static void lmp92001_adc_extractchannel(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_adc_enable_e channels);
|
|
static int lmp92001_adc_enablechannel(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_adc_enable_e channels);
|
|
static int lmp92001_adc_singleshot(FAR struct lmp92001_dev_s *priv);
|
|
static int lmp92001_adc_continuousconv(FAR struct lmp92001_dev_s *priv);
|
|
static int lmp92001_adc_readchannel(FAR struct lmp92001_dev_s *priv,
|
|
FAR struct adc_msg_s *msg);
|
|
|
|
/* DAC Interface. */
|
|
|
|
#ifdef CONFIG_DAC
|
|
static void lmp92001_dac_reset(FAR struct dac_dev_s *dev);
|
|
static int lmp92001_dac_setup(FAR struct dac_dev_s *dev);
|
|
static void lmp92001_dac_shutdown(FAR struct dac_dev_s *dev);
|
|
static void lmp92001_dac_txint(FAR struct dac_dev_s *dev, bool enable);
|
|
static int lmp92001_dac_send(FAR struct dac_dev_s *dev,
|
|
FAR struct dac_msg_s *msg);
|
|
static int lmp92001_dac_ioctl(FAR struct dac_dev_s *dev, int cmd,
|
|
unsigned long arg);
|
|
#endif
|
|
|
|
/* ADC Interface. */
|
|
|
|
#ifdef CONFIG_ADC
|
|
static int lmp92001_adc_bind(FAR struct adc_dev_s *dev,
|
|
FAR const struct adc_callback_s *callback);
|
|
static void lmp92001_adc_reset(FAR struct adc_dev_s *dev);
|
|
static int lmp92001_adc_setup(FAR struct adc_dev_s *dev);
|
|
static void lmp92001_adc_shutdown(FAR struct adc_dev_s *dev);
|
|
static void lmp92001_adc_rxint(FAR struct adc_dev_s *dev, bool enable);
|
|
static int lmp92001_adc_ioctl(FAR struct adc_dev_s *dev, int cmd,
|
|
unsigned long arg);
|
|
#endif
|
|
|
|
/* I/O Expander Interface. */
|
|
|
|
#ifdef CONFIG_IOEXPANDER
|
|
static int lmp92001_gpio_direction(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, int dir);
|
|
static int lmp92001_gpio_option(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, int opt, void *regval);
|
|
static int lmp92001_gpio_writepin(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, bool value);
|
|
static int lmp92001_gpio_readpin(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, FAR bool *value);
|
|
#ifdef CONFIG_IOEXPANDER_MULTIPIN
|
|
static int lmp92001_gpio_multiwritepin(FAR struct ioexpander_dev_s *dev,
|
|
FAR const uint8_t *pins,
|
|
FAR const bool *values, int count);
|
|
static int lmp92001_gpio_multireadpin(FAR struct ioexpander_dev_s *dev,
|
|
FAR const uint8_t *pins,
|
|
FAR bool *values, int count);
|
|
#endif
|
|
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
|
|
static FAR void *lmp92001_gpio_attach(FAR struct ioexpander_dev_s *dev,
|
|
ioe_pinset_t pinset,
|
|
ioe_callback_t callback,
|
|
FAR void *arg);
|
|
static int lmp92001_gpio_detach(FAR struct ioexpander_dev_s *dev,
|
|
FAR void *handle);
|
|
#endif
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Private Data
|
|
****************************************************************************/
|
|
|
|
static struct lmp92001_dev_s g_devpriv;
|
|
|
|
#ifdef CONFIG_DAC
|
|
static const struct dac_ops_s g_dacops =
|
|
{
|
|
lmp92001_dac_reset, /* ao_reset */
|
|
lmp92001_dac_setup, /* ao_setup */
|
|
lmp92001_dac_shutdown, /* ao_shutdown */
|
|
lmp92001_dac_txint, /* ao_txint */
|
|
lmp92001_dac_send, /* ao_send */
|
|
lmp92001_dac_ioctl /* ao_ioctl */
|
|
};
|
|
|
|
static struct dac_dev_s g_dacdev =
|
|
{
|
|
&g_dacops, /* ad_ops */
|
|
&g_devpriv /* ad_priv */
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_ADC
|
|
static const struct adc_ops_s g_adcops =
|
|
{
|
|
lmp92001_adc_bind, /* ao_bind */
|
|
lmp92001_adc_reset, /* ao_reset */
|
|
lmp92001_adc_setup, /* ao_setup */
|
|
lmp92001_adc_shutdown, /* ao_shutdown */
|
|
lmp92001_adc_rxint, /* ao_rxint */
|
|
lmp92001_adc_ioctl /* ao_ioctl */
|
|
};
|
|
|
|
static struct adc_dev_s g_adcdev =
|
|
{
|
|
&g_adcops, /* ad_ops */
|
|
&g_devpriv /* ad_priv */
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_IOEXPANDER
|
|
static const struct ioexpander_ops_s g_gpio_ops =
|
|
{
|
|
lmp92001_gpio_direction,
|
|
lmp92001_gpio_option,
|
|
lmp92001_gpio_writepin,
|
|
lmp92001_gpio_readpin,
|
|
lmp92001_gpio_readpin
|
|
#ifdef CONFIG_IOEXPANDER_MULTIPIN
|
|
, lmp92001_gpio_multiwritepin
|
|
, lmp92001_gpio_multireadpin
|
|
, lmp92001_gpio_multireadpin
|
|
#endif
|
|
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
|
|
, lmp92001_gpio_attach
|
|
, lmp92001_gpio_detach
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Private Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_i2c_write
|
|
*
|
|
* Description:
|
|
* Transmits a buffer.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_i2c_write(FAR struct lmp92001_dev_s *priv,
|
|
FAR const uint8_t *buffer, int buflen)
|
|
{
|
|
struct i2c_msg_s msg;
|
|
int ret;
|
|
|
|
/* Setup for the transfer */
|
|
|
|
msg.frequency = CONFIG_LMP92001_I2C_FREQUENCY,
|
|
msg.addr = priv->addr;
|
|
msg.flags = 0;
|
|
msg.buffer = (FAR uint8_t *)buffer; /* Override const */
|
|
msg.length = buflen;
|
|
|
|
/* Then perform the transfer. */
|
|
|
|
ret = I2C_TRANSFER(priv->i2c, &msg, 1);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 I2C transfer failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return (ret >= 0) ? OK : ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_i2c_read
|
|
*
|
|
* Description:
|
|
* Reads a buffer.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_i2c_read(FAR struct lmp92001_dev_s *priv,
|
|
uint8_t reg, FAR uint8_t *buffer, int buflen)
|
|
{
|
|
struct i2c_msg_s msg[2];
|
|
int ret;
|
|
|
|
/* Setup for the transfer */
|
|
|
|
msg[0].frequency = CONFIG_LMP92001_I2C_FREQUENCY,
|
|
msg[0].addr = priv->addr,
|
|
msg[0].flags = I2C_M_NOSTOP;
|
|
msg[0].buffer = ®
|
|
msg[0].length = 1;
|
|
|
|
msg[1].frequency = CONFIG_LMP92001_I2C_FREQUENCY,
|
|
msg[1].addr = priv->addr,
|
|
msg[1].flags = I2C_M_READ;
|
|
msg[1].buffer = buffer;
|
|
msg[1].length = buflen;
|
|
|
|
/* Then perform the transfer. */
|
|
|
|
ret = I2C_TRANSFER(priv->i2c, msg, 2);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 I2C transfer failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return (ret >= 0) ? OK : ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_setref
|
|
*
|
|
* Description:
|
|
* Sets the DACs reference (internal or external).
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_dac_setref(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_ref_e ref)
|
|
{
|
|
uint8_t value = 0;
|
|
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret = OK;
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_CREF, &value, 1);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 DAC set reference failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (ref == LMP92001_REF_EXTERNAL)
|
|
{
|
|
value |= LMP92001_CREF_DEXT;
|
|
}
|
|
else
|
|
{
|
|
value &= ~LMP92001_CREF_DEXT;
|
|
}
|
|
|
|
buffer[0] = LMP92001_REG_CREF;
|
|
buffer[1] = value;
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 DAC set reference failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_updateall
|
|
*
|
|
* Description:
|
|
* Write to all DACx registers simultaneously.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_dac_updateall(FAR struct lmp92001_dev_s *priv,
|
|
uint16_t value)
|
|
{
|
|
uint8_t const BUFFER_SIZE = 3u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret = OK;
|
|
|
|
buffer[0] = LMP92001_REG_DALL;
|
|
buffer[1] = (uint8_t)(value >> 8u);
|
|
buffer[2] = (uint8_t)(value & 0xffu);
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 DAC update all failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_reset
|
|
*
|
|
* Description:
|
|
* Reset the DAC device. Called early to initialize the hardware. This
|
|
* is called, before ao_setup() and on error conditions.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_DAC
|
|
static void lmp92001_dac_reset(FAR struct dac_dev_s *dev)
|
|
{
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_setup
|
|
*
|
|
* Description:
|
|
* Configure the DAC. This method is called the first time that the DAC
|
|
* device is opened. This will occur when the port is first opened.
|
|
* This setup includes configuring and attaching DAC interrupts. Interrupts
|
|
* are all disabled upon return.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_dac_setup(FAR struct dac_dev_s *dev)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv =
|
|
(FAR struct lmp92001_dev_s *)dev->ad_priv;
|
|
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret = OK;
|
|
|
|
/* Enable DAC channels. */
|
|
|
|
buffer[0] = LMP92001_REG_CDAC;
|
|
buffer[1] = LMP92001_CDAC_ON;
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 DAC setup failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_shutdown
|
|
*
|
|
* Description:
|
|
* Disable the DAC. This method is called when the DAC device is closed.
|
|
* This method reverses the operation the setup method.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lmp92001_dac_shutdown(FAR struct dac_dev_s *dev)
|
|
{
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_txint
|
|
*
|
|
* Description:
|
|
* Call to enable or disable TX interrupts
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lmp92001_dac_txint(FAR struct dac_dev_s *dev, bool enable)
|
|
{
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_send
|
|
*
|
|
* Description:
|
|
* This method will send one message on the DAC.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_dac_send(FAR struct dac_dev_s *dev,
|
|
FAR struct dac_msg_s *msg)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv =
|
|
(FAR struct lmp92001_dev_s *)dev->ad_priv;
|
|
|
|
uint8_t const BUFFER_SIZE = 3u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret;
|
|
|
|
/* Sanity check */
|
|
|
|
DEBUGASSERT(priv->i2c != NULL);
|
|
|
|
ainfo("Channel: %d - Value: %08x\n", msg->am_channel, msg->am_data);
|
|
|
|
/* Set up the message to send.
|
|
* We follow the same conventions as the datasheet.
|
|
* ie. channels number start from 1 not from zero.
|
|
*/
|
|
|
|
buffer[0] = (msg->am_channel - 1) + LMP92001_REG_DAC1;
|
|
buffer[1] = (uint8_t)(msg->am_data >> 8u);
|
|
buffer[2] = (uint8_t)(msg->am_data & 0xffu);
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 DAC send failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
dac_txdone(&g_dacdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_ioctl
|
|
*
|
|
* Description:
|
|
* All ioctl calls will be routed through this method.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_dac_ioctl(FAR struct dac_dev_s *dev, int cmd,
|
|
unsigned long arg)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv =
|
|
(FAR struct lmp92001_dev_s *)dev->ad_priv;
|
|
int ret = OK;
|
|
|
|
switch (cmd)
|
|
{
|
|
case ANIOC_LMP92001_DAC_SET_REF:
|
|
{
|
|
ret = lmp92001_dac_setref(priv, (enum lmp92001_ref_e)(arg));
|
|
}
|
|
break;
|
|
|
|
case ANIOC_LMP92001_DAC_UPDATEALL:
|
|
{
|
|
ret = lmp92001_dac_updateall(priv, (uint16_t)(arg));
|
|
}
|
|
break;
|
|
|
|
/* Command was not recognized */
|
|
|
|
default:
|
|
aerr("LMP92001 ERROR: Unrecognized cmd: %d\n", cmd);
|
|
ret = -ENOTTY;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_DAC */
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_setref
|
|
*
|
|
* Description:
|
|
* Sets the ADCs reference (internal or external).
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_setref(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_ref_e ref)
|
|
{
|
|
uint8_t value = 0;
|
|
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret = OK;
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_CREF, &value, 1);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC set reference failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (ref == LMP92001_REF_EXTERNAL)
|
|
{
|
|
value |= LMP92001_CREF_AEXT;
|
|
}
|
|
else
|
|
{
|
|
value &= ~LMP92001_CREF_AEXT;
|
|
}
|
|
|
|
buffer[0] = LMP92001_REG_CREF;
|
|
buffer[1] = value;
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC set reference failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_extractchannel
|
|
*
|
|
* Description:
|
|
* Extract channels from the enum.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lmp92001_adc_extractchannel(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_adc_enable_e channels)
|
|
{
|
|
uint8_t i;
|
|
uint8_t j;
|
|
uint16_t tmp;
|
|
|
|
i = 0u;
|
|
j = priv->adc_channels_enabled;
|
|
tmp = channels;
|
|
|
|
/* Channels to be enabled are the bits set in the argument channels. */
|
|
|
|
while (tmp != 0u)
|
|
{
|
|
if (tmp & 1u)
|
|
{
|
|
priv->adc_channels_enabled++;
|
|
priv->adc_channels[j] = i + 1;
|
|
|
|
ainfo("Channel %d to be enabled\n", priv->adc_channels[j]);
|
|
|
|
j++;
|
|
}
|
|
|
|
tmp >>= 1u;
|
|
i++;
|
|
}
|
|
|
|
ainfo("Number of channels to be enabled: %d\n",
|
|
priv->adc_channels_enabled);
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_enablechannel
|
|
*
|
|
* Description:
|
|
* Enables the given ADC channels.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_enablechannel(FAR struct lmp92001_dev_s *priv,
|
|
enum lmp92001_adc_enable_e channels)
|
|
{
|
|
uint8_t cad1 = 0u;
|
|
uint8_t cad2 = 0u;
|
|
uint8_t cad3 = 0u;
|
|
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret = OK;
|
|
|
|
if (priv->adc_channels_enabled < LMP92001_ADC_MAX_CHANNELS &&
|
|
channels != 0)
|
|
{
|
|
lmp92001_adc_extractchannel(priv, channels);
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_CAD1, &cad1, 1);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC enable channel failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_CAD2, &cad2, 1);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC enable channel failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_CAD3, &cad3, 1);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC enable channel failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
cad1 |= channels & 0x000ffu;
|
|
cad2 |= (channels >> 8u) & 0x000ffu;
|
|
cad3 |= (channels >> 16u) & 0x1u;
|
|
|
|
if (cad1 > 0)
|
|
{
|
|
buffer[0] = LMP92001_REG_CAD1;
|
|
buffer[1] = cad1;
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC enable channel failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (cad2 > 0)
|
|
{
|
|
buffer[0] = LMP92001_REG_CAD2;
|
|
buffer[1] = cad2;
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC enable channel failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (cad3 > 0)
|
|
{
|
|
buffer[0] = LMP92001_REG_CAD3;
|
|
buffer[1] = cad3;
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC enable channel failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_singleshot
|
|
*
|
|
* Description:
|
|
* Starts a single shot conversion.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_singleshot(FAR struct lmp92001_dev_s *priv)
|
|
{
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
uint8_t sgen_value = 0;
|
|
|
|
int ret = OK;
|
|
|
|
/* Lock registers, this will also force CGEN.STRT to 0. */
|
|
|
|
buffer[0] = LMP92001_REG_CGEN;
|
|
buffer[1] = LMP92001_CGEN_LCK;
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC Single shot failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Trigger a single shot conversion. */
|
|
|
|
buffer[0] = LMP92001_REG_CTRIG;
|
|
buffer[1] = LMP92001_CTRIG_SNGL;
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC Single shot failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for the BUSY flag. */
|
|
|
|
do
|
|
{
|
|
lmp92001_i2c_read(priv, LMP92001_REG_SGEN, &sgen_value, 1);
|
|
}
|
|
while ((sgen_value & LMP92001_SGEN_BUSY) != 0);
|
|
|
|
/* Unlock registers.
|
|
* It's not needed to read the registers first and verify if some
|
|
* bits were set. All the other bits should already be cleared.
|
|
*/
|
|
|
|
buffer[0] = LMP92001_REG_CGEN;
|
|
buffer[1] = 0;
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC Single shot failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_continuousconv
|
|
*
|
|
* Description:
|
|
* Starts the continuous conversion.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_continuousconv(FAR struct lmp92001_dev_s *priv)
|
|
{
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
uint8_t sgen_value = 0u;
|
|
|
|
int ret = OK;
|
|
|
|
/* Set CGEN.STRT bit and lock registers */
|
|
|
|
buffer[0] = LMP92001_REG_CGEN;
|
|
buffer[1] = LMP92001_CGEN_STRT | LMP92001_CGEN_LCK;
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC Continuous conversion failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for the BUSY flag. */
|
|
|
|
do
|
|
{
|
|
lmp92001_i2c_read(priv, LMP92001_REG_SGEN, &sgen_value, 1);
|
|
}
|
|
while ((sgen_value & LMP92001_SGEN_BUSY) != 0);
|
|
|
|
/* Unlock the registers and keep STRT set. */
|
|
|
|
buffer[0] = LMP92001_REG_CGEN;
|
|
buffer[1] = LMP92001_CGEN_STRT;
|
|
buffer[1] &= ~LMP92001_CGEN_LCK;
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC Continuous conversion failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_readchannel
|
|
*
|
|
* Description:
|
|
* Read from an ADC channel.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_readchannel(FAR struct lmp92001_dev_s *priv,
|
|
FAR struct adc_msg_s *msg)
|
|
{
|
|
uint8_t buffer[2];
|
|
uint8_t channel;
|
|
|
|
int ret = OK;
|
|
|
|
/* Adding LMP92001_REG_ADC1 to a channel gives the channel's register.
|
|
* Reminder: Channels numbering is the same as the datasheet.
|
|
* First channel is called Channel1.
|
|
* Note: ADC registers are 16-bit wide.
|
|
*/
|
|
|
|
channel = LMP92001_REG_ADC1 + msg->am_channel - 1;
|
|
|
|
ret = lmp92001_i2c_read(priv, channel, buffer, 2);
|
|
if (ret < 0)
|
|
{
|
|
aerr("LMP92001 ADC read failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
msg->am_data = (buffer[0] << 8u) | buffer[1];
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_ADC
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_bind
|
|
*
|
|
* Description:
|
|
* Bind the upper-half driver callbacks to the lower-half implementation.
|
|
* This must be called early in order to receive ADC event notifications.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_bind(FAR struct adc_dev_s *dev,
|
|
FAR const struct adc_callback_s *callback)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv =
|
|
(FAR struct lmp92001_dev_s *)dev->ad_priv;
|
|
|
|
DEBUGASSERT(priv != NULL);
|
|
|
|
priv->cb = callback;
|
|
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_reset
|
|
*
|
|
* Description:
|
|
* Reset the ADC device. Called early to initialize the hardware. This
|
|
* is called, before ao_setup() and on error conditions.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lmp92001_adc_reset(FAR struct adc_dev_s *dev)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv =
|
|
(FAR struct lmp92001_dev_s *)dev->ad_priv;
|
|
|
|
priv->adc_channels_enabled = 0;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_setup
|
|
*
|
|
* Description:
|
|
* Configure the ADC. This method is called the first time that the ADC
|
|
* device is opened. This will occur when the port is first opened.
|
|
* This setup includes configuring and attaching ADC interrupts.
|
|
* Interrupts are all disabled upon return.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_setup(FAR struct adc_dev_s *dev)
|
|
{
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_shutdown
|
|
*
|
|
* Description:
|
|
* Disable the ADC. This method is called when the ADC device is closed.
|
|
* This method reverses the operation the setup method.
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lmp92001_adc_shutdown(FAR struct adc_dev_s *dev)
|
|
{
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_rxint
|
|
*
|
|
* Description:
|
|
* Call to enable or disable RX interrupts
|
|
*
|
|
****************************************************************************/
|
|
|
|
static void lmp92001_adc_rxint(FAR struct adc_dev_s *dev, bool enable)
|
|
{
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_ioctl
|
|
*
|
|
* Description:
|
|
* All ioctl calls will be routed through this method
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_adc_ioctl(FAR struct adc_dev_s *dev, int cmd,
|
|
unsigned long arg)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv =
|
|
(FAR struct lmp92001_dev_s *)dev->ad_priv;
|
|
int ret = OK;
|
|
|
|
switch (cmd)
|
|
{
|
|
case ANIOC_LMP92001_ADC_ENABLE:
|
|
{
|
|
ret = lmp92001_adc_enablechannel(priv,
|
|
(enum lmp92001_adc_enable_e)arg);
|
|
}
|
|
break;
|
|
|
|
case ANIOC_LMP92001_ADC_SET_REF:
|
|
{
|
|
ret = lmp92001_adc_setref(priv, (enum lmp92001_ref_e)(arg));
|
|
}
|
|
break;
|
|
|
|
case ANIOC_TRIGGER:
|
|
case ANIOC_LMP92001_ADC_SINGLESHOT_CONV:
|
|
{
|
|
struct adc_msg_s msg;
|
|
|
|
int i;
|
|
|
|
ret = lmp92001_adc_singleshot(priv);
|
|
if (ret < 0)
|
|
{
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < priv->adc_channels_enabled; i++)
|
|
{
|
|
msg.am_channel = priv->adc_channels[i];
|
|
|
|
ret = lmp92001_adc_readchannel(priv, &msg);
|
|
|
|
priv->cb->au_receive(&g_adcdev, priv->adc_channels[i],
|
|
msg.am_data);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ANIOC_LMP92001_ADC_READ_CHANNEL:
|
|
{
|
|
FAR struct adc_msg_s *msg =
|
|
(FAR struct adc_msg_s *)((uintptr_t)arg);
|
|
|
|
ret = lmp92001_adc_singleshot(priv);
|
|
if (ret < 0)
|
|
{
|
|
break;
|
|
}
|
|
|
|
ret = lmp92001_adc_readchannel(priv, msg);
|
|
}
|
|
break;
|
|
|
|
case ANIOC_LMP92001_ADC_CONTINUOUS_CONV:
|
|
{
|
|
struct adc_msg_s msg;
|
|
|
|
int i;
|
|
|
|
ret = lmp92001_adc_continuousconv(priv);
|
|
if (ret < 0)
|
|
{
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < priv->adc_channels_enabled; i++)
|
|
{
|
|
msg.am_channel = priv->adc_channels[i];
|
|
|
|
ret = lmp92001_adc_readchannel(priv, &msg);
|
|
|
|
priv->cb->au_receive(&g_adcdev, priv->adc_channels[i],
|
|
msg.am_data);
|
|
}
|
|
}
|
|
break;
|
|
|
|
/* Command was not recognized */
|
|
|
|
default:
|
|
aerr("LMP92001 ERROR: Unrecognized cmd: %d\n", cmd);
|
|
ret = -ENOTTY;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_ADC */
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_direction
|
|
*
|
|
* Description:
|
|
* Set the direction of an ioexpander pin. Required.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* pin - The index of the pin to alter in this call
|
|
* dir - One of the IOEXPANDER_DIRECTION_ macros
|
|
*
|
|
* Returned Value:
|
|
* 0 on success, else a negative error code
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_IOEXPANDER
|
|
static int lmp92001_gpio_direction(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, int direction)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv = (FAR struct lmp92001_dev_s *)dev;
|
|
|
|
uint8_t regval;
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret;
|
|
|
|
if (direction != IOEXPANDER_DIRECTION_IN &&
|
|
direction != IOEXPANDER_DIRECTION_OUT)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
DEBUGASSERT(priv != NULL && pin < LMP92001_GPIO_MAX_PINS);
|
|
|
|
gpioinfo("I2C addr=%02x pin=%u direction=%s\n",
|
|
priv->addr, pin,
|
|
(direction == IOEXPANDER_DIRECTION_IN) ? "IN" : "OUT");
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_CGPO, ®val, 1);
|
|
if (ret < 0)
|
|
{
|
|
gpioerr("LMP92001 GPIO set direction failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
buffer[0] = LMP92001_REG_CGPO;
|
|
if (direction == IOEXPANDER_DIRECTION_IN)
|
|
{
|
|
buffer[1] = regval | (1 << pin);
|
|
}
|
|
else
|
|
{
|
|
buffer[1] = regval & ~(1 << pin);
|
|
}
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
gpioerr("LMP92001 GPIO set direction failed: %d\n", ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_option
|
|
*
|
|
* Description:
|
|
* Set pin options. Required.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* pin - The index of the pin to alter in this call
|
|
* opt - One of the IOEXPANDER_OPTION_ macros
|
|
* val - The option's value
|
|
*
|
|
* Returned Value:
|
|
* 0 on success, else a negative error code
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_gpio_option(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, int opt, void *regval)
|
|
{
|
|
return OK;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_writepin
|
|
*
|
|
* Description:
|
|
* Set the pin level. Required.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* pin - The index of the pin to alter in this call
|
|
* val - The pin level. Usually TRUE will set the pin high,
|
|
* except if OPTION_INVERT has been set on this pin.
|
|
*
|
|
* Returned Value:
|
|
* 0 on success, else a negative error code
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_gpio_writepin(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, bool value)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv = (FAR struct lmp92001_dev_s *)dev;
|
|
|
|
uint8_t regval;
|
|
uint8_t const BUFFER_SIZE = 2u;
|
|
uint8_t buffer[BUFFER_SIZE];
|
|
|
|
int ret;
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_CGPO, ®val, 1);
|
|
if (ret < 0)
|
|
{
|
|
gpioerr("LMP92001 GPIO write pin failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
buffer[0] = LMP92001_REG_CGPO;
|
|
|
|
if (value)
|
|
{
|
|
buffer[1] = regval | (1 << pin);
|
|
}
|
|
else
|
|
{
|
|
buffer[1] = regval & ~(value << pin);
|
|
}
|
|
|
|
ret = lmp92001_i2c_write(priv, buffer, BUFFER_SIZE);
|
|
if (ret < 0)
|
|
{
|
|
gpioerr("LMP92001 GPIO write pin failed: %d\n", ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_readpin
|
|
*
|
|
* Description:
|
|
* Read the actual PIN level. This can be different from the last value
|
|
* written to this pin. Required.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* pin - The index of the pin
|
|
* value - Pointer to a buffer where the pin level is stored. Usually TRUE
|
|
* if the pin is high.
|
|
*
|
|
* Returned Value:
|
|
* 0 on success, else a negative error code
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_gpio_readpin(FAR struct ioexpander_dev_s *dev,
|
|
uint8_t pin, FAR bool *value)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv = (FAR struct lmp92001_dev_s *)dev;
|
|
|
|
uint8_t regval;
|
|
|
|
int ret;
|
|
|
|
DEBUGASSERT(priv != NULL && pin < LMP92001_GPIO_MAX_PINS &&
|
|
value != NULL);
|
|
|
|
gpioinfo("I2C addr=%02x, pin=%u\n", priv->addr, pin);
|
|
|
|
ret = lmp92001_i2c_read(priv, LMP92001_REG_SGPI, ®val, 1);
|
|
if (ret < 0)
|
|
{
|
|
gpioerr("LMP92001 GPIO read pin failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
*value = (bool)(regval >> pin) & 1u;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_multiwritepin
|
|
*
|
|
* Description:
|
|
* Set the pin level for multiple pins. This routine may be faster than
|
|
* individual pin accesses. Optional.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* pins - The list of pin indexes to alter in this call
|
|
* val - The list of pin levels.
|
|
*
|
|
* Returned Value:
|
|
* 0 on success, else a negative error code
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_IOEXPANDER_MULTIPIN
|
|
static int lmp92001_gpio_multiwritepin(FAR struct ioexpander_dev_s *dev,
|
|
FAR const uint8_t *pins,
|
|
FAR const bool *values, int count)
|
|
{
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_multireadpin
|
|
*
|
|
* Description:
|
|
* Read the actual level for multiple pins. This routine may be faster than
|
|
* individual pin accesses. Optional.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* pin - The list of pin indexes to read
|
|
* values - Pointer to a buffer where the pin levels are stored.
|
|
*
|
|
* Returned Value:
|
|
* 0 on success, else a negative error code
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_gpio_multireadpin(FAR struct ioexpander_dev_s *dev,
|
|
FAR const uint8_t *pins,
|
|
FAR bool *values, int count)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_attach
|
|
*
|
|
* Description:
|
|
* Attach and enable a pin interrupt callback function.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* pinset - The set of pin events that will generate the callback
|
|
* callback - The pointer to callback function. NULL will detach the
|
|
* callback.
|
|
* arg - User-provided callback argument
|
|
*
|
|
* Returned Value:
|
|
* A non-NULL handle value is returned on success. This handle may be
|
|
* used later to detach and disable the pin interrupt.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
|
|
static FAR void *lmp92001_gpio_attach(FAR struct ioexpander_dev_s *dev,
|
|
ioe_pinset_t pinset,
|
|
ioe_callback_t callback,
|
|
FAR void *arg)
|
|
{
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_gpio_detach
|
|
*
|
|
* Description:
|
|
* Detach and disable a pin interrupt callback function.
|
|
*
|
|
* Input Parameters:
|
|
* dev - Device-specific state data
|
|
* handle - The non-NULL opaque value return by lmp92001_gpio_attach()
|
|
*
|
|
* Returned Value:
|
|
* 0 on success, else a negative error code
|
|
*
|
|
****************************************************************************/
|
|
|
|
static int lmp92001_gpio_detach(FAR struct ioexpander_dev_s *dev,
|
|
FAR void *handle)
|
|
{
|
|
}
|
|
#endif
|
|
#endif /* CONFIG_IOEXPANDER */
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_dac_initialize
|
|
*
|
|
* Description:
|
|
* Initialize DAC
|
|
*
|
|
* Input Parameters:
|
|
* I2C Port number
|
|
* Device address
|
|
*
|
|
* Returned Value:
|
|
* Valid LMP92001 device structure reference on success; a NULL on failure
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_DAC
|
|
FAR struct dac_dev_s *lmp92001_dac_initialize(FAR struct i2c_master_s *i2c,
|
|
uint8_t addr)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv;
|
|
|
|
/* Sanity check */
|
|
|
|
DEBUGASSERT(i2c != NULL);
|
|
|
|
/* Initialize the LMP92001 device structure */
|
|
|
|
priv = (FAR struct lmp92001_dev_s *)g_dacdev.ad_priv;
|
|
priv->i2c = i2c;
|
|
priv->addr = addr;
|
|
|
|
return &g_dacdev;
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: lmp92001_adc_initialize
|
|
*
|
|
* Description:
|
|
* Initialize ADC
|
|
*
|
|
* Input Parameters:
|
|
* I2C Port number
|
|
* Device address
|
|
*
|
|
* Returned Value:
|
|
* Valid LMP92001 device structure reference on success; a NULL on failure
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_ADC
|
|
FAR struct adc_dev_s *lmp92001_adc_initialize(FAR struct i2c_master_s *i2c,
|
|
uint8_t addr)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv;
|
|
|
|
/* Sanity check */
|
|
|
|
DEBUGASSERT(i2c != NULL);
|
|
|
|
/* Initialize the LMP92001 device structure */
|
|
|
|
priv = (FAR struct lmp92001_dev_s *)g_adcdev.ad_priv;
|
|
priv->cb = NULL;
|
|
priv->i2c = i2c;
|
|
priv->addr = addr;
|
|
|
|
return &g_adcdev;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_IOEXPANDER
|
|
FAR struct ioexpander_dev_s *
|
|
lmp92001_gpio_initialize(FAR struct i2c_master_s *i2c, uint8_t addr)
|
|
{
|
|
FAR struct lmp92001_dev_s *priv;
|
|
|
|
/* Sanity check */
|
|
|
|
DEBUGASSERT(i2c != NULL);
|
|
|
|
/* Initialize the LMP92001 device structure */
|
|
|
|
priv = &g_devpriv;
|
|
|
|
priv->gpio_dev.ops = &g_gpio_ops;
|
|
priv->i2c = i2c;
|
|
priv->addr = addr;
|
|
|
|
return &priv->gpio_dev;
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_LMP92001 */
|