OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/sched/mqueue/mq_timedsend.c

515 lines
18 KiB
C
Raw Blame History

/****************************************************************************
* sched/mqueue/mq_timedsend.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <unistd.h>
#include <mqueue.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/wdog.h>
#include <nuttx/cancelpt.h>
#include "clock/clock.h"
#include "sched/sched.h"
#include "mqueue/mqueue.h"
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: nxmq_sndtimeout
*
* Description:
* This function is called if the timeout elapses before the message queue
* becomes non-full.
*
* Input Parameters:
* pid - the task ID of the task to wakeup
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void nxmq_sndtimeout(wdparm_t pid)
{
FAR struct tcb_s *wtcb;
irqstate_t flags;
/* Disable interrupts. This is necessary because an interrupt handler may
* attempt to send a message while we are doing this.
*/
flags = enter_critical_section();
/* Get the TCB associated with this pid. It is possible that task may no
* longer be active when this watchdog goes off.
*/
wtcb = nxsched_get_tcb(pid);
/* It is also possible that an interrupt/context switch beat us to the
* punch and already changed the task's state.
*/
if (wtcb != NULL && wtcb->task_state == TSTATE_WAIT_MQNOTFULL)
{
/* Restart with task with a timeout error */
nxmq_wait_irq(wtcb, ETIMEDOUT);
}
/* Interrupts may now be re-enabled. */
leave_critical_section(flags);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: file_mq_timedsend_internal
*
* Description:
* This is an internal function of file_mq_timedsend()/file_mq_ticksend(),
* please refer to the detailed description for more information.
*
* Input Parameters:
* mq - Message queue descriptor
* msg - Message to send
* msglen - The length of the message in bytes
* prio - The priority of the message
* abstime - the absolute time to wait until a timeout is decleared
* ticks - Ticks to wait from the start time until the semaphore is
* posted.
*
* Returned Value:
* This is an internal OS interface and should not be used by applications.
* It follows the NuttX internal error return policy: Zero (OK) is
* returned on success. A negated errno value is returned on failure.
* (see mq_timedsend() for the list list valid return values).
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set for the
* message queue description referred to by mq.
* EINVAL Either msg or mq is NULL or the value of prio is invalid.
* EBADF Message queue opened not opened for writing.
* EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
*
****************************************************************************/
static int
file_mq_timedsend_internal(FAR struct file *mq, FAR const char *msg,
size_t msglen, unsigned int prio,
FAR const struct timespec *abstime,
sclock_t ticks)
{
FAR struct tcb_s *rtcb = this_task();
FAR struct mqueue_inode_s *msgq;
FAR struct mqueue_msg_s *mqmsg;
irqstate_t flags;
int ret;
DEBUGASSERT(up_interrupt_context() == false);
/* Verify the input parameters on any failures to verify. */
ret = nxmq_verify_send(mq, msg, msglen, prio);
if (ret < 0)
{
return ret;
}
msgq = mq->f_inode->i_private;
/* Disable interruption */
flags = enter_critical_section();
/* Pre-allocate a message structure */
mqmsg = nxmq_alloc_msg();
if (mqmsg == NULL)
{
/* Failed to allocate the message. nxmq_alloc_msg() does not set the
* errno value.
*/
ret = -ENOMEM;
goto errout_in_critical_section;
}
/* OpenGroup.org: "Under no circumstance shall the operation fail with a
* timeout if there is sufficient room in the queue to add the message
* immediately. The validity of the abstime parameter need not be checked
* when there is sufficient room in the queue."
*
* Also ignore the time value if for some crazy reason we were called from
* an interrupt handler. This probably really should be an assertion.
*
* NOTE: There is a race condition here: What if a message is added by
* interrupt related logic so that queue again becomes non-empty. That
* is handled because nxmq_do_send() will permit the maxmsgs limit to be
* exceeded in that case.
*/
if (msgq->nmsgs < msgq->maxmsgs || up_interrupt_context())
{
/* Do the send with no further checks (possibly exceeding maxmsgs)
* Currently nxmq_do_send() always returns OK.
*/
goto out_send_message;
}
/* The message queue is full... We are going to wait.
* Now we must have a valid time value.
*/
if (abstime != NULL)
{
if (abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000)
{
ret = -EINVAL;
}
else
{
/* We are not in an interrupt handler and the message queue
* is full. Set up a timed wait for the message queue to
* become non-full.
*
* Convert the timespec to clock ticks. We must have interrupts
* disabled here so that this time stays valid until the wait
* begins.
*/
ret = clock_abstime2ticks(CLOCK_REALTIME, abstime, &ticks);
}
/* Handle any time-related errors */
if (ret != OK)
{
nxmq_free_msg(mqmsg);
goto errout_in_critical_section;
}
}
/* If the time has already expired and the message queue is empty,
* return immediately.
*/
if (ticks <= 0)
{
ret = -ETIMEDOUT;
nxmq_free_msg(mqmsg);
goto errout_in_critical_section;
}
/* Start the watchdog and begin the wait for MQ not full */
wd_start(&rtcb->waitdog, ticks, nxmq_sndtimeout, nxsched_gettid());
/* And wait for the message queue to be non-empty */
ret = nxmq_wait_send(msgq, mq->f_oflags);
/* This may return with an error and errno set to either EINTR
* or ETIMEDOUT. Cancel the watchdog timer in any event.
*/
wd_cancel(&rtcb->waitdog);
/* Check if nxmq_wait_send() failed */
if (ret == OK)
{
/* If any of the above failed, set the errno. Otherwise, there should
* be space for another message in the message queue. NOW we can
* allocate the message structure.
*
* Currently nxmq_do_send() always returns OK.
*/
out_send_message:
ret = nxmq_do_send(msgq, mqmsg, msg, msglen, prio);
}
else
{
/* free the message as it can't be sent */
nxmq_free_msg(mqmsg);
}
/* Exit here with (1) the scheduler locked, (2) a message allocated, (3) a
* wdog allocated, and (4) interrupts disabled.
*/
errout_in_critical_section:
leave_critical_section(flags);
return ret;
}
/****************************************************************************
* Name: file_mq_timedsend
*
* Description:
* This function adds the specified message (msg) to the message queue
* (mq). file_mq_timedsend() behaves just like mq_send(), except that if
* the queue is full and the O_NONBLOCK flag is not enabled for the
* message queue description, then abstime points to a structure which
* specifies a ceiling on the time for which the call will block.
*
* file_mq_timedsend() is functionally equivalent to mq_timedsend() except
* that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_timedsend() for a more complete description of the
* behavior of this function
*
* Input Parameters:
* mq - Message queue descriptor
* msg - Message to send
* msglen - The length of the message in bytes
* prio - The priority of the message
* abstime - the absolute time to wait until a timeout is decleared
*
* Returned Value:
* This is an internal OS interface and should not be used by applications.
* It follows the NuttX internal error return policy: Zero (OK) is
* returned on success. A negated errno value is returned on failure.
* (see mq_timedsend() for the list list valid return values).
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set for the
* message queue description referred to by mq.
* EINVAL Either msg or mq is NULL or the value of prio is invalid.
* EBADF Message queue opened not opened for writing.
* EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
*
****************************************************************************/
int file_mq_timedsend(FAR struct file *mq, FAR const char *msg,
size_t msglen, unsigned int prio,
FAR const struct timespec *abstime)
{
return file_mq_timedsend_internal(mq, msg, msglen, prio, abstime, 0);
}
/****************************************************************************
* Name: file_mq_ticksend
*
* Description:
* This function adds the specified message (msg) to the message queue
* (mq). file_mq_ticksend() behaves just like mq_send(), except that if
* the queue is full and the O_NONBLOCK flag is not enabled for the
* message queue description, then abstime points to a structure which
* specifies a ceiling on the time for which the call will block.
*
* file_mq_ticksend() is functionally equivalent to mq_timedsend() except
* that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_timedsend() for a more complete description of the
* behavior of this function
*
* Input Parameters:
* mq - Message queue descriptor
* msg - Message to send
* msglen - The length of the message in bytes
* prio - The priority of the message
* ticks - Ticks to wait from the start time until the semaphore is
* posted.
*
* Returned Value:
* This is an internal OS interface and should not be used by applications.
* It follows the NuttX internal error return policy: Zero (OK) is
* returned on success. A negated errno value is returned on failure.
* (see mq_timedsend() for the list list valid return values).
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set for the
* message queue description referred to by mq.
* EINVAL Either msg or mq is NULL or the value of prio is invalid.
* EBADF Message queue opened not opened for writing.
* EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
*
****************************************************************************/
int file_mq_ticksend(FAR struct file *mq, FAR const char *msg,
size_t msglen, unsigned int prio, sclock_t ticks)
{
return file_mq_timedsend_internal(mq, msg, msglen, prio, NULL, ticks);
}
/****************************************************************************
* Name: nxmq_timedsend
*
* Description:
* This function adds the specified message (msg) to the message queue
* (mqdes). nxmq_timedsend() behaves just like mq_send(), except
* that if the queue is full and the O_NONBLOCK flag is not enabled for
* the message queue description, then abstime points to a structure which
* specifies a ceiling on the time for which the call will block.
*
* nxmq_timedsend() is functionally equivalent to mq_timedsend() except
* that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_timedsend() for a more complete description of the
* behavior of this function
*
* Input Parameters:
* mqdes - Message queue descriptor
* msg - Message to send
* msglen - The length of the message in bytes
* prio - The priority of the message
* abstime - the absolute time to wait until a timeout is decleared
*
* Returned Value:
* This is an internal OS interface and should not be used by applications.
* It follows the NuttX internal error return policy: Zero (OK) is
* returned on success. A negated errno value is returned on failure.
* (see mq_timedsend() for the list list valid return values).
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set for the
* message queue description referred to by mqdes.
* EINVAL Either msg or mqdes is NULL or the value of prio is invalid.
* EBADF Message queue opened not opened for writing.
* EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
*
****************************************************************************/
int nxmq_timedsend(mqd_t mqdes, FAR const char *msg, size_t msglen,
unsigned int prio, FAR const struct timespec *abstime)
{
FAR struct file *filep;
int ret;
ret = fs_getfilep(mqdes, &filep);
if (ret < 0)
{
return ret;
}
return file_mq_timedsend_internal(filep, msg, msglen, prio, abstime, 0);
}
/****************************************************************************
* Name: mq_timedsend
*
* Description:
* This function adds the specified message (msg) to the message queue
* (mqdes). The "msglen" parameter specifies the length of the message
* in bytes pointed to by "msg." This length must not exceed the maximum
* message length from the mq_getattr().
*
* If the message queue is not full, mq_timedsend() place the message in
* the message queue at the position indicated by the "prio" argrument.
* Messages with higher priority will be inserted before lower priority
* messages. The value of "prio" must not exceed MQ_PRIO_MAX.
*
* If the specified message queue is full and O_NONBLOCK is not set in the
* message queue, then mq_timedsend() will block until space becomes
* available to the queue the message or a timeout occurs.
*
* mq_timedsend() behaves just like mq_send(), except that if the queue
* is full and the O_NONBLOCK flag is not enabled for the message queue
* description, then abstime points to a structure which specifies a
* ceiling on the time for which the call will block. This ceiling is an
* absolute timeout in seconds and nanoseconds since the Epoch (midnight
* on the morning of 1 January 1970).
*
* If the message queue is full, and the timeout has already expired by
* the time of the call, mq_timedsend() returns immediately.
*
* Input Parameters:
* mqdes - Message queue descriptor
* msg - Message to send
* msglen - The length of the message in bytes
* prio - The priority of the message
* abstime - the absolute time to wait until a timeout is decleared
*
* Returned Value:
* On success, mq_send() returns 0 (OK); on error, -1 (ERROR)
* is returned, with errno set to indicate the error:
*
* EAGAIN The queue was full, and the O_NONBLOCK flag was set for the
* message queue description referred to by mqdes.
* EINVAL Either msg or mqdes is NULL or the value of prio is invalid.
* EBADF Message queue opened not opened for writing.
* EMSGSIZE 'msglen' was greater than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
*
* Assumptions/restrictions:
*
****************************************************************************/
int mq_timedsend(mqd_t mqdes, FAR const char *msg, size_t msglen,
unsigned int prio, FAR const struct timespec *abstime)
{
int ret;
/* mq_timedsend() is a cancellation point */
enter_cancellation_point();
/* Let nxmq_send() do all of the work */
ret = nxmq_timedsend(mqdes, msg, msglen, prio, abstime);
if (ret < 0)
{
set_errno(-ret);
ret = ERROR;
}
leave_cancellation_point();
return ret;
}
Reference in New Issue View Git Blame Copy Permalink