incubator-nuttx/include/nuttx/ioexpander/pca9555.h

117 lines
4.0 KiB
C

/****************************************************************************
* include/nuttx/ioexpander/pca9555.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* References:
* "16-bit I2C-bus and SMBus I/O port with interrupt product datasheet",
* Rev. 08 - 22 October 2009, NXP
*/
#ifndef __INCLUDE_NUTTX_IOEXPANDER_PCA9555_H
#define __INCLUDE_NUTTX_IOEXPANDER_PCA9555_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/i2c/i2c_master.h>
/****************************************************************************
* Public Types
****************************************************************************/
/* A reference to a structure of this type must be passed to the PCA9555
* driver when the driver is instantiated. This structure provides
* information about the configuration of the PCA9555 and provides some
* board-specific hooks.
*
* Memory for this structure is provided by the caller. It is not copied by
* the driver and is presumed to persist while the driver is active. The
* memory must be writeable because, under certain circumstances, the driver
* may modify the frequency.
*/
struct pca9555_config_s
{
/* Device characterization */
uint8_t address; /* 7-bit I2C address (only bits 0-6 used) */
uint32_t frequency; /* I2C or SPI frequency */
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
/* If multiple PCA9555 devices are supported, then an IRQ number must
* be provided for each so that their interrupts can be distinguished.
*/
/* IRQ/GPIO access callbacks. These operations all hidden behind
* callbacks to isolate the PCA9555 driver from differences in GPIO
* interrupt handling by varying boards and MCUs.
*
* attach - Attach the PCA9555 interrupt handler to the GPIO interrupt
* enable - Enable or disable the GPIO interrupt
*/
CODE int (*attach)(FAR struct pca9555_config_s *state, xcpt_t isr,
FAR void *arg);
CODE void (*enable)(FAR struct pca9555_config_s *state, bool enable);
#endif
};
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: pca9555_initialize
*
* Description:
* Instantiate and configure the PCA9555 device driver to use the provided
* I2C device
* instance.
*
* Input Parameters:
* dev - An I2C driver instance
* minor - The device i2c address
* config - Persistent board configuration data
*
* Returned Value:
* an ioexpander_dev_s instance on success, NULL on failure.
*
****************************************************************************/
FAR struct ioexpander_dev_s *pca9555_initialize(FAR struct i2c_master_s *dev,
FAR struct pca9555_config_s *config);
#ifdef __cplusplus
}
#endif
#endif /* __INCLUDE_NUTTX_IOEXPANDER_PCA9555_H */