incubator-nuttx/net/sixlowpan/sixlowpan.h

279 lines
10 KiB
C

/****************************************************************************
* net/sixlowpan/sixlowpan.h
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef _NET_SIXLOWPAN_SIXLOWPAN_H
#define _NET_SIXLOWPAN_SIXLOWPAN_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#ifdef CONFIG_NET_6LOWPAN
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
struct net_driver_s; /* Forward reference */
struct ipv6_hdr_s; /* Forward reference */
struct socket; /* Forward reference */
struct sockaddr; /* Forward reference */
/****************************************************************************
* Name: sixlowpan_initialize
*
* Description:
* sixlowpan_initialize() is called during OS initialization at power-up
* reset. It is called from the common net_setup() function.
* sixlowpan_initialize() configures 6LoWPAN networking data structures.
* It is called prior to platform-specific driver initialization so that
* the 6LoWPAN networking subsystem is prepared to deal with network
* driver initialization actions.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
void sixlowpan_initialize(void);
/****************************************************************************
* Name: psock_6lowpan_tcp_send
*
* Description:
* psock_6lowpan_tcp_send() call may be used only when the TCP socket is in a
* connected state (so that the intended recipient is known).
*
* Parameters:
* psock - An instance of the internal socket structure.
* buf - Data to send
* len - Length of data to send
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately. Returned error numbers
* must be consistent with definition of errors reported by send() or
* sendto().
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
#ifdef CONFIG_NET_TCP
ssize_t psock_6lowpan_tcp_send(FAR struct socket *psock, FAR const void *buf,
size_t len);
#endif
/****************************************************************************
* Name: sixlowpan_tcp_send
*
* Description:
* TCP output comes through three different mechansims. Either from:
*
* 1. TCP socket output. For the case of TCP output to an
* IEEE802.15.4, the TCP output is caught in the socket
* send()/sendto() logic and and redirected to psock_6lowpan_tcp_send().
* 2. TCP output from the TCP state machine. That will occur
* during TCP packet processing by the TCP state meachine.
* 3. TCP output resulting from TX or timer polling
*
* Cases 2 and 3 will be handled here. Logic in ipv6_tcp_input(),
* devif_poll(), and devif_timer() detect if (1) an attempt to return with
* d_len > 0 and (2) that the device is an IEEE802.15.4 MAC network
* driver. Under those conditions, this function will be called to create
* the IEEE80215.4 frames.
*
* Parameters:
* dev - The network device containing the packet to be sent.
* fwddev - The network device used to send the data. This will be the
* same device except for the IP forwarding case where packets
* are sent across devices.
* ipv6 - A pointer to the IPv6 header in dev->d_buf which lies AFTER
* the L1 header. NOTE: dev->d_len must have been decremented
* by the size of any preceding MAC header.
*
* Returned Value:
* None
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
void sixlowpan_tcp_send(FAR struct net_driver_s *dev,
FAR struct net_driver_s *fwddev,
FAR struct ipv6_hdr_s *ipv6);
/****************************************************************************
* Name: sixlowpan_icmpv6_send
*
* Description:
* All outgoing ICMPv6 messages come through one of two mechanisms:
*
* 1. The output from internal ICMPv6 message passing. These outgoing
* messages will use device polling.
* 2. ICMPv6 output resulting from TX or timer polling.
*
* Both cases are handled here.
*
* Parameters:
* dev - The network device containing the packet to be sent.
* fwddev - The network device used to send the data. This will be the
* same device except for the IP forwarding case where packets
* are sent across devices.
* ipv6 - A pointer to the IPv6 header in dev->d_buf which lies AFTER
* the L1 header. NOTE: dev->d_len must have been decremented
* by the size of any preceding MAC header.
*
* Returned Value:
* None
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
#ifdef CONFIG_NET_ICMPv6
void sixlowpan_icmpv6_send(FAR struct net_driver_s *dev,
FAR struct net_driver_s *fwddev,
FAR struct ipv6_hdr_s *ipv6);
#endif
/****************************************************************************
* Name: psock_6lowpan_udp_send
*
* Description:
* psock_6lowpan_udp_send() call may be used with connectionlesss UDP
* sockets.
*
* Parameters:
* psock - An instance of the internal socket structure.
* buf - Data to send
* len - Length of data to send
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately. Returned error numbers
* must be consistent with definition of errors reported by send() or
* sendto().
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
#ifdef CONFIG_NET_UDP
ssize_t psock_6lowpan_udp_send(FAR struct socket *psock, FAR const void *buf,
size_t len);
#endif
/****************************************************************************
* Name: psock_6lowpan_udp_sendto
*
* Description:
* If sendto() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET)
* socket, the parameters to and 'tolen' are ignored (and the error EISCONN
* may be returned when they are not NULL and 0), and the error ENOTCONN is
* returned when the socket was not actually connected.
*
* Parameters:
* psock A pointer to a NuttX-specific, internal socket structure
* buf Data to send
* len Length of data to send
* flags Send flags
* to Address of recipient
* tolen The length of the address structure
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately. Returned error
* number must be consistent with definition of errors reported by
* sendto().
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
ssize_t psock_6lowpan_udp_sendto(FAR struct socket *psock,
FAR const void *buf,
size_t len, int flags,
FAR const struct sockaddr *to,
socklen_t tolen);
/****************************************************************************
* Name: sixlowpan_udp_send
*
* Description:
* Handles forwarding a UDP packet via 6LoWPAN. This is currently only
* used by the IPv6 forwarding logic.
*
* Parameters:
* dev - An instance of nework device state structure
* fwddev - The network device used to send the data. This will be the
* same device except for the IP forwarding case where packets
* are sent across devices.
* ipv6 - A pointer to the IPv6 header in dev->d_buf which lies AFTER
* the L1 header. NOTE: dev->d_len must have been decremented
* by the size of any preceding MAC header.
*
* Returned Value:
* None
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
#ifdef CONFIG_NET_IPFORWARD
void sixlowpan_udp_send(FAR struct net_driver_s *dev,
FAR struct net_driver_s *fwddev,
FAR struct ipv6_hdr_s *ipv6);
#endif
#endif /* CONFIG_NET_6LOWPAN */
#endif /* _NET_SIXLOWPAN_SIXLOWPAN_H */