incubator-nuttx/arch/arm/src/lpc2378/lpc23xx_decodeirq.c

177 lines
6.0 KiB
C
Executable File

/********************************************************************************
* arch/arm/src/lpc2378/lpc23xx_decodeirq.c
*
* Copyright (C) 2010 Rommel Marcelo. All rights reserved.
* Author: Rommel Marcelo
*
* This file is part of the NuttX RTOS and based on the lpc2148 port:
*
* Copyright (C) 2010, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
********************************************************************************/
/********************************************************************************
* Included Files
********************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <assert.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "os_internal.h"
#include "internal.h"
#include "lpc23xx_vic.h"
/********************************************************************************
* Definitions
********************************************************************************/
/********************************************************************************
* Private Types
********************************************************************************/
/********************************************************************************
* Public Data
********************************************************************************/
/********************************************************************************
* Private Data
********************************************************************************/
/********************************************************************************
* Private Functions
********************************************************************************/
/********************************************************************************
* Public Funstions
********************************************************************************/
/********************************************************************************
* up_decodeirq() and/or lpc23xx_decodeirq()
*
* Description:
* The vectored interrupt controller (VIC) takes 32 interrupt request inputs
* and programmatically assigns them into 2 categories: FIQ, vectored IRQ.
*
* - FIQs have the highest priority. There is a single FIQ vector, but multiple
* interrupt sources can be ORed to this FIQ vector.
*
* - Vectored IRQs have the middle priority. Any of the 32 interrupt sources
* can be assigned to vectored IRQs.
*
* - Non-vectored IRQs have the lowest priority.
*
* The general flow of IRQ processing is to simply read the VICAddress
* and jump to the address of the vector provided in the register. The VIC will
* provide the address of the highest priority vectored IRQ. If a non-vectored
* IRQ is requesting, the address of a default handler is provided.
*
********************************************************************************/
#ifndef CONFIG_VECTORED_INTERRUPTS
void up_decodeirq(uint32_t *regs)
#else
static void lpc23xx_decodeirq(uint32_t *regs)
#endif
{
#ifdef CONFIG_SUPPRESS_INTERRUPTS
lib_lowprintf("Unexpected IRQ\n");
current_regs = regs;
PANIC(OSERR_ERREXCEPTION);
#else
/* Check which IRQ fires */
uint32_t irqbits = vic_getreg(VIC_IRQSTATUS_OFFSET) & 0xFFFFFFFF;
unsigned int irq;
for (irq = 0; irq < NR_IRQS; irq++)
{
if (irqbits & (uint32_t) (1 << irq))
break;
}
/* Verify that the resulting IRQ number is valid */
if (irq < NR_IRQS) /* redundant check ?? */
{
uint32_t *savestate;
/* Current regs non-zero indicates that we are processing an interrupt;
* current_regs is also used to manage interrupt level context switches.
*/
savestate = (uint32_t*)current_regs;
current_regs = regs;
/* Mask and acknowledge the interrupt */
up_maskack_irq(irq);
/* Deliver the IRQ */
irq_dispatch(irq, regs);
/* Restore the previous value of current_regs. NULL would indicate that
* we are no longer in an interrupt handler. It will be non-NULL if we
* are returning from a nested interrupt.
*/
current_regs = savestate;
}
#endif
}
#ifdef CONFIG_VECTORED_INTERRUPTS
void up_decodeirq(uint32_t *regs)
{
vic_vector_t vector = (vic_vector_t) vic_getreg(VIC_ADDRESS_OFFSET);
/* Mask and acknowledge the interrupt */
up_maskack_irq(irq);
/* Valid Interrupt */
if (vector != NULL)
(vector) (regs);
}
#endif