incubator-nuttx/drivers/lcd/gc9a01.h

72 lines
3.2 KiB
C

/****************************************************************************
* drivers/lcd/gc9a01.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __DRIVERS_LCD_GC9A01_H
#define __DRIVERS_LCD_GC9A01_H
/****************************************************************************
* Included Files
****************************************************************************/
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define GC9A01_NOP 0x00 /* No Operation */
#define GC9A01_SWRESET 0x01 /* Software Reset */
#define GC9A01_RDDID 0x04 /* Read Display ID */
#define GC9A01_RDDST 0x09 /* Read Display Status */
#define GC9A01_SLPIN 0x10 /* Sleep In & Booster Off */
#define GC9A01_SLPOUT 0x11 /* Sleep Out & Booster On */
#define GC9A01_PTLON 0x12 /* Partial Mode On */
#define GC9A01_NORON 0x13 /* Partial Mode Off */
#define GC9A01_INVOFF 0x20 /* Display Inversion Off */
#define GC9A01_INVON 0x21 /* Display Inversion On */
#define GC9A01_DISPOFF 0x28 /* Display Off */
#define GC9A01_DISPON 0x29 /* Display On */
#define GC9A01_CASET 0x2a /* Column Address Set */
#define GC9A01_RASET 0x2b /* Row Address Set */
#define GC9A01_RAMWR 0x2c /* Memory Write */
#define GC9A01_RAMRD 0x2e /* Memory Read */
#define GC9A01_PTLAR 0x30 /* Partial Area */
#define GC9A01_VSCRDEF 0x33 /* Vertical Scrolling Definition */
#define GC9A01_TEON 0x35 /* Tering Effect Line On */
#define GC9A01_MADCTL 0x36 /* Memory Data Access Control */
#define GC9A01_MADCTL_MY (1<<7) /* Page Address Order */
#define GC9A01_MADCTL_MX (1<<6) /* Column Address Order */
#define GC9A01_MADCTL_MV (1<<5) /* Page/Column Order */
#define GC9A01_MADCTL_ML (1<<4) /* Line Address Order */
#define GC9A01_MADCTL_BGR (1<<3) /* Set Panel Order BGR */
#define GC9A01_MADCTL_MH (1<<2) /* Display Data Latch Order */
#define GC9A01_VSCSAD 0x37 /* Vertical Scrolling Start Address */
#define GC9A01_IDMOFF 0x38 /* Idle Mode Off */
#define GC9A01_IDMON 0x39 /* Idle Mode On */
#define GC9A01_COLMOD 0x3a /* Interface Pixel Format */
#define GC9A01_ENIREG1 0xFE /* Enable internal register 1 */
#define GC9A01_ENIREG2 0xEF /* Enable internal register 2 */
#endif /* __DRIVERS_LCD_GC9A01_H */