incubator-nuttx/net/pkt/pkt.h

311 lines
11 KiB
C

/****************************************************************************
* net/pkt/pkt.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef _NET_PKT_PKT_H
#define _NET_PKT_PKT_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <queue.h>
#ifdef CONFIG_NET_PKT
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Allocate a new packet socket data callback */
#define pkt_callback_alloc(dev,conn) \
devif_callback_alloc(dev, &conn->list)
#define pkt_callback_free(dev,conn,cb) \
devif_conn_callback_free(dev, cb, &conn->list)
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/* Representation of a packet socket connection */
struct devif_callback_s; /* Forward reference */
struct pkt_conn_s
{
dq_entry_t node; /* Supports a double linked list */
uint8_t lmac[6]; /* The local Ethernet address in network byte order */
uint8_t ifindex;
uint16_t proto;
uint8_t crefs; /* Reference counts on this instance */
/* Defines the list of packet callbacks */
struct devif_callback_s *list;
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
# define EXTERN extern "C"
extern "C"
{
#else
# define EXTERN extern
#endif
/* The packet socket interface */
EXTERN const struct sock_intf_s g_pkt_sockif;
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
struct net_driver_s; /* Forward reference */
struct eth_hdr_s; /* Forward reference */
struct socket; /* Forward reference */
/****************************************************************************
* Name: pkt_initialize()
*
* Description:
* Initialize the packet socket connection structures. Called once and
* only from the network initialization logic.
*
****************************************************************************/
void pkt_initialize(void);
/****************************************************************************
* Name: pkt_alloc()
*
* Description:
* Allocate a new, uninitialized packet socket connection structure. This
* is normally something done by the implementation of the socket() API
*
****************************************************************************/
FAR struct pkt_conn_s *pkt_alloc(void);
/****************************************************************************
* Name: pkt_free()
*
* Description:
* Free a packet socket connection structure that is no longer in use.
* This should be done by the implementation of close().
*
****************************************************************************/
void pkt_free(FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_active()
*
* Description:
* Find a connection structure that is the appropriate
* connection to be used with the provided Ethernet header
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
FAR struct pkt_conn_s *pkt_active(FAR struct eth_hdr_s *buf);
/****************************************************************************
* Name: pkt_nextconn()
*
* Description:
* Traverse the list of allocated packet connections
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
FAR struct pkt_conn_s *pkt_nextconn(FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_callback
*
* Description:
* Inform the application holding the packet socket of a change in state.
*
* Returned Value:
* OK if packet has been processed, otherwise ERROR.
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
uint16_t pkt_callback(FAR struct net_driver_s *dev,
FAR struct pkt_conn_s *conn, uint16_t flags);
/****************************************************************************
* Name: pkt_input
*
* Description:
* Handle incoming packet input
*
* This function provides the interface between Ethernet device drivers and
* packet socket logic. All frames that are received should be provided to
* pkt_input() prior to other routing.
*
* Input Parameters:
* dev - The device driver structure containing the received packet
*
* Returned Value:
* OK The packet has been processed and can be deleted
* ERROR There is a matching connection, but could not dispatch the packet
* yet. Useful when a packet arrives before a recv call is in
* place.
*
* Assumptions:
* Called from the network diver with the network locked.
*
****************************************************************************/
/* pkt_input() is prototyped in include/nuttx/net/pkt.h */
/****************************************************************************
* Name: pkt_recvfrom
*
* Description:
* Implements the socket recvfrom interface for the case of the AF_INET
* and AF_INET6 address families. pkt_recvfrom() receives messages from
* a socket, and may be used to receive data on a socket whether or not it
* is connection-oriented.
*
* If 'from' is not NULL, and the underlying protocol provides the source
* address, this source address is filled in. The argument 'fromlen' is
* initialized to the size of the buffer associated with from, and
* modified on return to indicate the actual size of the address stored
* there.
*
* Input Parameters:
* psock A pointer to a NuttX-specific, internal socket structure
* buf Buffer to receive data
* len Length of buffer
* flags Receive flags
* from Address of source (may be NULL)
* fromlen The length of the address structure
*
* Returned Value:
* On success, returns the number of characters received. If no data is
* available to be received and the peer has performed an orderly shutdown,
* recv() will return 0. Otherwise, on errors, a negated errno value is
* returned (see recvfrom() for the list of appropriate error values).
*
****************************************************************************/
ssize_t pkt_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len,
int flags, FAR struct sockaddr *from,
FAR socklen_t *fromlen);
/****************************************************************************
* Name: pkt_find_device
*
* Description:
* Select the network driver to use with the PKT transaction.
*
* Input Parameters:
* conn - PKT connection structure (not currently used).
*
* Returned Value:
* A pointer to the network driver to use.
*
****************************************************************************/
FAR struct net_driver_s *pkt_find_device(FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: pkt_poll
*
* Description:
* Poll a packet "connection" structure for availability of TX data
*
* Input Parameters:
* dev - The device driver structure to use in the send operation
* conn - The packet "connection" to poll for TX data
*
* Returned Value:
* None
*
* Assumptions:
* Called from the network device interface (devif) with the network
* locked.
*
****************************************************************************/
void pkt_poll(FAR struct net_driver_s *dev, FAR struct pkt_conn_s *conn);
/****************************************************************************
* Name: psock_pkt_send
*
* Description:
* The psock_pkt_send() call may be used only when the packet socket is in a
* connected state (so that the intended recipient is known).
*
* Input Parameters:
* psock An instance of the internal socket structure.
* buf Data to send
* len Length of data to send
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* a negated errno value is retruend. See send() for the complete list
* of return values.
*
****************************************************************************/
struct socket;
ssize_t psock_pkt_send(FAR struct socket *psock, FAR const void *buf,
size_t len);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_NET_PKT */
#endif /* _NET_PKT_PKT_H */