OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/drivers/analog/ads1255.c

350 lines
10 KiB
C
Raw Blame History

/************************************************************************************
* arch/drivers/analog/ads1255.c
*
* Copyright (C) 2011 Li Zhuoyi. All rights reserved.
* Author: Li Zhuoyi <lzyy.cn@gmail.com>
* History: 0.1 2011-08-05 initial version
* 0.2 2011-08-25 fix bug in g_adcdev (cd_ops -> ad_ops,cd_priv -> ad_priv)
*
* This file is a part of NuttX:
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <errno.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/arch.h>
#include <nuttx/spi/spi.h>
#include <nuttx/analog/adc.h>
#if defined(CONFIG_ADC_ADS1255)
#define ADS125X_BUFON 0x02
#define ADS125X_BUFOFF 0x00
#define ADS125X_PGA1 0x00
#define ADS125X_PGA2 0x01
#define ADS125X_PGA4 0x02
#define ADS125X_PGA8 0x03
#define ADS125X_PGA16 0x04
#define ADS125X_PGA32 0x05
#define ADS125X_PGA64 0x06
#define ADS125X_RDATA 0x01 //Read Data
#define ADS125X_RDATAC 0x03 //Read Data Continuously
#define ADS125X_SDATAC 0x0F //Stop Read Data Continuously
#define ADS125X_RREG 0x10 //Read from REG
#define ADS125X_WREG 0x50 //Write to REG
#define ADS125X_SELFCAL 0xF0 //Offset and Gain Self-Calibration
#define ADS125X_SELFOCAL 0xF1 //Offset Self-Calibration
#define ADS125X_SELFGCAL 0xF2 //Gain Self-Calibration
#define ADS125X_SYSOCAL 0xF3 //System Offset Calibration
#define ADS125X_SYSGCAL 0xF4 //System Gain Calibration
#define ADS125X_SYNC 0xFC //Synchronize the A/D Conversion
#define ADS125X_STANDBY 0xFD //Begin Standby Mode
#define ADS125X_RESET 0xFE //Reset to Power-Up Values
#define ADS125X_WAKEUP 0xFF //Completes SYNC and Exits Standby Mode
#ifndef CONFIG_ADS1255_FREQUENCY
#define CONFIG_ADS1255_FREQUENCY 1000000
#endif
#ifndef CONFIG_ADS1255_MUX
#define CONFIG_ADS1255_MUX 0x01
#endif
#ifndef CONFIG_ADS1255_CHMODE
#define CONFIG_ADS1255_CHMODE 0x00
#endif
#ifndef CONFIG_ADS1255_BUFON
#define CONFIG_ADS1255_BUFON 1
#endif
#ifndef CONFIG_ADS1255_PGA
#define CONFIG_ADS1255_PGA ADS125X_PGA2
#endif
#ifndef CONFIG_ADS1255_SPS
#define CONFIG_ADS1255_SPS 50
#endif
/****************************************************************************
* ad_private Types
****************************************************************************/
struct up_dev_s
{
uint8_t channel;
uint32_t sps;
uint8_t pga;
uint8_t buf;
const uint8_t *mux;
int irq;
int devno;
FAR struct spi_dev_s *spi; /* Cached SPI device reference */
};
/****************************************************************************
* ad_private Function Prototypes
****************************************************************************/
/* ADC methods */
static void adc_reset(FAR struct adc_dev_s *dev);
static int adc_setup(FAR struct adc_dev_s *dev);
static void adc_shutdown(FAR struct adc_dev_s *dev);
static void adc_rxint(FAR struct adc_dev_s *dev, bool enable);
static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg);
static int adc_interrupt(int irq, void *context);
/****************************************************************************
* ad_private Data
****************************************************************************/
static const struct adc_ops_s g_adcops =
{
.ao_reset = adc_reset, /* ao_reset */
.ao_setup = adc_setup, /* ao_setup */
.ao_shutdown = adc_shutdown, /* ao_shutdown */
.ao_rxint = adc_rxint, /* ao_rxint */
.ao_ioctl = adc_ioctl /* ao_read */
};
static struct up_dev_s g_adcpriv =
{
.mux = (const uint8_t [])
{
CONFIG_ADS1255_MUX,0
},
.sps = CONFIG_ADS1255_SPS,
.channel = 0,
.irq = CONFIG_ADS1255_IRQ,
};
static struct adc_dev_s g_adcdev =
{
.ad_ops = &g_adcops,
.ad_priv= &g_adcpriv,
};
/****************************************************************************
* Private Functions
****************************************************************************/
static uint8_t getspsreg(uint16_t sps)
{
static const unsigned short sps_tab[]=
{
3,7,12,20,27,40,55,80,300,750,1500,3000,5000,10000,20000,65535,
};
static const unsigned char sps_reg[]=
{
0x03,0x13,0x23,0x33,0x43,0x53,0x63,0x72,0x82,0x92,0xa1,0xb0,0xc0,0xd0,0xe0,0xf0,
};
int i;
for (i=0; i<16; i++)
{
if (sps<sps_tab[i])
{
break;
}
}
return sps_reg[i];
}
/****************************************************************************
* ad_private Functions
****************************************************************************/
/* Reset the ADC device. Called early to initialize the hardware. This
* is called, before ao_setup() and on error conditions.
*/
static void adc_reset(FAR struct adc_dev_s *dev)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
FAR struct spi_dev_s *spi = priv->spi;
SPI_SETMODE(spi, SPIDEV_MODE1);
SPI_SETBITS(spi, 8);
SPI_SETFREQUENCY(spi, CONFIG_ADS1255_FREQUENCY);
usleep(1000);
SPI_SELECT(spi, priv->devno, true);
SPI_SEND(spi,ADS125X_WREG+0x03); /* WRITE SPS REG */
SPI_SEND(spi,0x00); /* count=1 */
SPI_SEND(spi,0x63);
SPI_SELECT(spi, priv->devno, false);
}
/* Configure the ADC. This method is called the first time that the ADC
* device is opened. This will occur when the port is first opened.
* This setup includes configuring and attaching ADC interrupts. Interrupts
* are all disabled upon return.
*/
static int adc_setup(FAR struct adc_dev_s *dev)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
FAR struct spi_dev_s *spi = priv->spi;
int ret = irq_attach(priv->irq, adc_interrupt);
if (ret == OK)
{
SPI_SELECT(spi, priv->devno, true);
SPI_SEND(spi,ADS125X_WREG); /* WRITE REG from 0 */
SPI_SEND(spi,0x03); /* count=4+1 */
if (priv->buf)
{
SPI_SEND(spi,ADS125X_BUFON); /* REG0 STATUS BUFFER ON */
}
else
{
SPI_SEND(spi,ADS125X_BUFOFF);
}
SPI_SEND(spi,priv->mux[0]);
SPI_SEND(spi,priv->pga); /* REG2 ADCON PGA=2 */
SPI_SEND(spi,getspsreg(priv->sps));
usleep(1000);
SPI_SEND(spi,ADS125X_SELFCAL);
SPI_SELECT(spi, priv->devno, false);
up_enable_irq(priv->irq);
}
return ret;
}
/* Disable the ADC. This method is called when the ADC device is closed.
* This method reverses the operation the setup method.
*/
static void adc_shutdown(FAR struct adc_dev_s *dev)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
up_disable_irq(priv->irq);
irq_detach(priv->irq);
}
/* Call to enable or disable RX interrupts */
static void adc_rxint(FAR struct adc_dev_s *dev, bool enable)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv;
if (enable)
{
up_enable_irq(priv->irq);
}
else
{
up_disable_irq(priv->irq);
}
}
/* All ioctl calls will be routed through this method */
static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg)
{
dbg("Fix me:Not Implemented\n");
return 0;
}
static int adc_interrupt(int irq, void *context)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)g_adcdev.ad_priv;
FAR struct spi_dev_s *spi = priv->spi;
unsigned char buf[4];
unsigned char ch;
SPI_SELECT(spi, priv->devno, true);
SPI_SEND(spi,ADS125X_RDATA);
up_udelay(10);
buf[3]=SPI_SEND(spi,0xff);
buf[2]=SPI_SEND(spi,0xff);
buf[1]=SPI_SEND(spi,0xff);
buf[0]=0;
priv->channel++;
ch = priv->mux[priv->channel];
if ( ch == 0 )
{
priv->channel=0;
ch = priv->mux[0];
}
SPI_SEND(spi,ADS125X_WREG+0x01);
SPI_SEND(spi,0x00);
SPI_SEND(spi,ch);
SPI_SEND(spi,ADS125X_SYNC);
up_udelay(2);
SPI_SEND(spi,ADS125X_WAKEUP);
SPI_SELECT(spi, priv->devno, false);
adc_receive(&g_adcdev,priv->channel,*(int32_t *)buf);
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ads1255initialize
*
* Description:
* Initialize the selected adc port
*
* Input Parameter:
* Port number (for hardware that has mutiple adc interfaces)
*
* Returned Value:
* Valid can device structure reference on succcess; a NULL on failure
*
****************************************************************************/
FAR struct adc_dev_s *up_ads1255initialize(FAR struct spi_dev_s *spi, unsigned int devno)
{
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)g_adcdev.ad_priv;
/* Driver state data */
priv->spi = spi;
priv->devno = devno;
return &g_adcdev;
}
#endif
Reference in New Issue View Git Blame Copy Permalink