incubator-nuttx/include/nuttx/fs/nxffs.h

165 lines
5.8 KiB
C

/****************************************************************************
* include/nuttx/fs/nxffs.h
*
* Copyright (C) 2011-2013, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_FS_NXFFS_H
#define __INCLUDE_NUTTX_FS_NXFFS_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/fs/fs.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* If the erased state of FLASH memory is anything other than 0xff, then this
* configuration should be provided.
*/
#ifndef CONFIG_NXFFS_ERASEDSTATE
# define CONFIG_NXFFS_ERASEDSTATE 0xff
#endif
#if CONFIG_NXFFS_ERASEDSTATE != 0xff && CONFIG_NXFFS_ERASEDSTATE != 0x00
# error "CONFIG_NXFFS_ERASEDSTATE must be either 0x00 or 0xff"
#endif
/* Don't bother trying to pack things closer together than this. */
#ifndef CONFIG_NXFFS_PACKTHRESHOLD
# define CONFIG_NXFFS_PACKTHRESHOLD 32
#endif
/* This is how big an inode name is permitted to be. */
#ifndef CONFIG_NXFFS_MAXNAMLEN
# define CONFIG_NXFFS_MAXNAMLEN 255
#endif
/* Clean-up can either mean packing files together toward the end of the file
* or, if file are deleted at the end of the file, clean up can simply mean
* erasing the end of FLASH memory so that it can be re-used again. However,
* doing this can also harm the life of the FLASH part because it can mean
* that the tail end of the FLASH is re-used too often.
*
* This threshold determines if/when it is worth erased the tail end of FLASH
* and making it available for re-use (and possible over-wear).
*/
#ifndef CONFIG_NXFFS_TAILTHRESHOLD
# define CONFIG_NXFFS_TAILTHRESHOLD (8*1024)
#endif
/* At present, only a single pre-allocated NXFFS volume is supported. This
* is because here can be only a single NXFFS volume mounted at any time.
* This has to do with the fact that we bind to an MTD driver (instead of a
* block driver) and bypass all of the normal mount operations.
*/
#undef CONFIG_NXFSS_PREALLOCATED
#define CONFIG_NXFSS_PREALLOCATED 1
/* If we were asked to scan the volume, then a re-formatting threshold must
* also be provided.
*/
#ifdef CONFIG_NXFFS_SCAN_VOLUME
# ifndef CONFIG_NXFFS_REFORMAT_THRESH
# define CONFIG_NXFFS_REFORMAT_THRESH 20
# endif
# if CONFIG_NXFFS_REFORMAT_THRESH < 0 || CONFIG_NXFFS_REFORMAT_THRESH > 100
# error CONFIG_NXFFS_REFORMAT_THRESH is not a valid percentage
# endif
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: nxffs_initialize
*
* Description:
* Initialize to provide NXFFS on an MTD interface
*
* Input Parameters:
* mtd - The MTD device that supports the FLASH interface.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int nxffs_initialize(FAR struct mtd_dev_s *mtd);
/****************************************************************************
* Name: nxffs_dump
*
* Description:
* Dump a summary of the contents of an NXFFS file system. CONFIG_DEBUG_FEATURES
* and CONFIG_DEBUG_FS must be enabled for this function to do anything.
*
* Input Parameters:
* mtd - The MTD device that provides the interface to NXFFS-formatted
* media.
* verbose - FALSE: only show errors
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int nxffs_dump(FAR struct mtd_dev_s *mtd, bool verbose);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __INCLUDE_NUTTX_FS_NXFFS_H */