OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/drivers/power/smps.c

524 lines
15 KiB
C
Raw Blame History

/****************************************************************************
* drivers/power/smps.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* Upper-half, character driver for SMPS (switched-mode power supply) */
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/fs/fs.h>
#include <nuttx/power/smps.h>
#include <nuttx/irq.h>
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int smps_open(FAR struct file *filep);
static int smps_close(FAR struct file *filep);
static ssize_t smps_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static ssize_t smps_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int smps_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations smps_fops =
{
smps_open, /* open */
smps_close, /* close */
smps_read, /* read */
smps_write, /* write */
NULL, /* seek */
smps_ioctl, /* ioctl */
NULL /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: smps_open
*
* Description:
* This function is called whenever the SMPS device is opened.
*
****************************************************************************/
static int smps_open(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct smps_dev_s *dev = inode->i_private;
uint8_t tmp;
int ret;
/* If the port is the middle of closing, wait until the close is finished */
ret = nxsem_wait(&dev->closesem);
if (ret >= 0)
{
/* Increment the count of references to the device. If this the first
* time that the driver has been opened for this device, then
* initialize the device.
*/
tmp = dev->ocount + 1;
if (tmp == 0)
{
/* More than 255 opens; uint8_t overflows to zero */
ret = -EMFILE;
}
else
{
/* Check if this is the first time that the driver has been
* opened.
*/
if (tmp == 1)
{
/* Yes.. perform one time hardware initialization. */
irqstate_t flags = enter_critical_section();
ret = dev->ops->setup(dev);
if (ret == OK)
{
/* Save the new open count on success */
dev->ocount = tmp;
}
leave_critical_section(flags);
}
}
nxsem_post(&dev->closesem);
}
return OK;
}
/****************************************************************************
* Name: smps_close
*
* Description:
* This routine is called when the SMPS device is closed.
* It waits for the last remaining data to be sent.
*
****************************************************************************/
static int smps_close(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct smps_dev_s *dev = inode->i_private;
irqstate_t flags;
int ret;
ret = nxsem_wait(&dev->closesem);
if (ret >= 0)
{
/* Decrement the references to the driver. If the reference count will
* decrement to 0, then uninitialize the driver.
*/
if (dev->ocount > 1)
{
dev->ocount--;
nxsem_post(&dev->closesem);
}
else
{
/* There are no more references to the port */
dev->ocount = 0;
/* Free the IRQ and disable the SMPS device */
flags = enter_critical_section(); /* Disable interrupts */
dev->ops->shutdown(dev); /* Disable the SMPS */
leave_critical_section(flags);
nxsem_post(&dev->closesem);
}
}
return ret;
}
/****************************************************************************
* Name: smps_read
****************************************************************************/
static ssize_t smps_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
return 1;
}
/****************************************************************************
* Name: smps_write
****************************************************************************/
static ssize_t smps_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
return 1;
}
/****************************************************************************
* Name: smps_ioctl
****************************************************************************/
static int smps_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode = filep->f_inode;
FAR struct smps_dev_s *dev = inode->i_private;
FAR struct smps_s *smps = (FAR struct smps_s *)dev->priv;
int ret;
switch (cmd)
{
case PWRIOC_START:
{
/* Allow SMPS start only when some limits available
* and structure is locked.
* REVISIT: not sure if it is needed here
*/
if ((smps->limits.lock == false) ||
(smps->limits.v_in <= 0 && smps->limits.v_out <= 0 &&
smps->limits.i_in <= 0 && smps->limits.i_out <= 0 &&
smps->limits.p_in <= 0 && smps->limits.p_out <= 0))
{
pwrerr("ERROR: SMPS limits data must be set"
" and locked before SMPS start\n");
ret = -EPERM;
goto errout;
}
/* Check SMPS mode */
if (smps->opmode == SMPS_OPMODE_INIT)
{
pwrerr("ERROR: SMPS operation mode not specified\n");
ret = -EPERM;
goto errout;
}
/* When constan current mode, then output current must be
* provided
*/
if (smps->opmode == SMPS_OPMODE_CC && smps->param.i_out <= 0)
{
pwrerr("ERROR: CC selected but i_out not specified!\n");
ret = -EPERM;
goto errout;
}
/* When constan voltage mode, then output voltage must be
* provided
*/
if (smps->opmode == SMPS_OPMODE_CV && smps->param.v_out <= 0)
{
pwrerr("ERROR: CV selected but v_out not specified!\n");
ret = -EPERM;
goto errout;
}
/* When constan power mode, then output power must be provided */
if (smps->opmode == SMPS_OPMODE_CP && smps->param.p_out <= 0)
{
pwrerr("ERROR: CP selected but p_out not specified!\n");
ret = -EPERM;
goto errout;
}
/* REVISIT: something else ?? */
/* Finally, call start from lower-half driver */
ret = dev->ops->start(dev);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_START failed %d\n", ret);
}
break;
}
case PWRIOC_STOP:
{
ret = dev->ops->stop(dev);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_STOP failed %d\n", ret);
}
break;
}
case PWRIOC_SET_MODE:
{
uint8_t mode = ((uint8_t)arg);
ret = dev->ops->mode_set(dev, mode);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_SET_MODE failed %d\n", ret);
}
break;
}
case PWRIOC_SET_LIMITS:
{
FAR struct smps_limits_s *limits =
(FAR struct smps_limits_s *)((uintptr_t)arg);
if (smps->limits.lock == true)
{
pwrerr("ERROR: SMPS limits locked!\n");
ret = -EPERM;
goto errout;
}
/* NOTE: this call must set the smps_limits_s structure */
ret = dev->ops->limits_set(dev, limits);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_SET_LIMITS failed %d\n", ret);
}
break;
}
case PWRIOC_GET_STATE:
{
FAR struct smps_state_s *state =
(FAR struct smps_state_s *)((uintptr_t)arg);
ret = dev->ops->state_get(dev, state);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_GET_STATE failed %d\n", ret);
}
break;
}
case PWRIOC_SET_FAULT:
{
uint8_t fault = ((uint8_t)arg);
ret = dev->ops->fault_set(dev, fault);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_SET_FAULT failed %d\n", ret);
}
break;
}
case PWRIOC_GET_FAULT:
{
FAR uint8_t *fault = ((FAR uint8_t *)arg);
ret = dev->ops->fault_get(dev, fault);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_GET_FAULT failed %d\n", ret);
}
break;
}
case PWRIOC_CLEAN_FAULT:
{
uint8_t fault = ((uint8_t)arg);
ret = dev->ops->fault_clean(dev, fault);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_CLEAN_FAULT failed %d\n", ret);
}
break;
}
case PWRIOC_SET_PARAMS:
{
FAR struct smps_params_s *params =
(FAR struct smps_params_s *)((uintptr_t)arg);
if (smps->param.lock == true)
{
pwrerr("ERROR: SMPS params locked!\n");
ret = -EPERM;
goto errout;
}
if ((smps->limits.lock == false) ||
(smps->limits.v_in <= 0 && smps->limits.v_out <= 0 &&
smps->limits.i_in <= 0 && smps->limits.i_out <= 0 &&
smps->limits.p_in <= 0 && smps->limits.p_out <= 0))
{
pwrerr("ERROR: limits must be set prior to params!\n");
ret = -EPERM;
goto errout;
}
/* Check output voltage configuration */
if (smps->limits.v_out > 0 && params->v_out > smps->limits.v_out)
{
pwrerr("ERROR: params->v_out > limits.v_out: %.2f > %.2f\n",
params->v_out, smps->limits.v_out);
ret = -EPERM;
goto errout;
}
/* Check output current configuration */
if (smps->limits.i_out > 0 && params->i_out > smps->limits.i_out)
{
pwrerr("ERROR: params->i_out > limits.i_out: %.2f > %.2f\n",
params->i_out, smps->limits.i_out);
ret = -EPERM;
goto errout;
}
/* Check output power configuration */
if (smps->limits.p_out > 0 && params->p_out > smps->limits.p_out)
{
pwrerr("ERROR: params->p_out > limits.p_out: %.2f > %.2f\n",
params->p_out, smps->limits.p_out);
ret = -EPERM;
goto errout;
}
/* TODO: limits */
ret = dev->ops->params_set(dev, params);
if (ret != OK)
{
pwrerr("ERROR: PWRIOC_SET_PARAMS failed %d\n", ret);
}
break;
}
default:
{
pwrinfo("Forwarding unrecognized cmd: %d arg: %ld\n", cmd, arg);
ret = dev->ops->ioctl(dev, cmd, arg);
break;
}
}
errout:
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: smps_register
****************************************************************************/
int smps_register(FAR const char *path, FAR struct smps_dev_s *dev,
FAR void *lower)
{
int ret;
DEBUGASSERT(path != NULL && dev != NULL && lower != NULL);
DEBUGASSERT(dev->ops != NULL);
/* For safety reason, when some necessary low-level logic is not provided,
* system should fail before low-level hardware initialization, so:
* - all ops are checked here, before character driver registration
* - all ops must be provided, even if not used
*/
DEBUGASSERT(dev->ops->setup != NULL);
DEBUGASSERT(dev->ops->shutdown != NULL);
DEBUGASSERT(dev->ops->stop != NULL);
DEBUGASSERT(dev->ops->start != NULL);
DEBUGASSERT(dev->ops->params_set != NULL);
DEBUGASSERT(dev->ops->mode_set != NULL);
DEBUGASSERT(dev->ops->limits_set != NULL);
DEBUGASSERT(dev->ops->fault_set != NULL);
DEBUGASSERT(dev->ops->state_get != NULL);
DEBUGASSERT(dev->ops->fault_get != NULL);
DEBUGASSERT(dev->ops->fault_clean != NULL);
DEBUGASSERT(dev->ops->ioctl != NULL);
/* Initialize the SMPS device structure */
dev->ocount = 0;
/* Initialize semaphores */
nxsem_init(&dev->closesem, 0, 1);
/* Connect SMPS driver with lower level interface */
dev->lower = lower;
/* Register the SMPS character driver */
ret = register_driver(path, &smps_fops, 0444, dev);
if (ret < 0)
{
nxsem_destroy(&dev->closesem);
}
return ret;
}
Reference in New Issue View Git Blame Copy Permalink