514 lines
23 KiB
C
514 lines
23 KiB
C
/****************************************************************************
|
||
* arch/xtensa/include/esp32/irq.h
|
||
*
|
||
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||
* contributor license agreements. See the NOTICE file distributed with
|
||
* this work for additional information regarding copyright ownership. The
|
||
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||
* "License"); you may not use this file except in compliance with the
|
||
* License. You may obtain a copy of the License at
|
||
*
|
||
* http://www.apache.org/licenses/LICENSE-2.0
|
||
*
|
||
* Unless required by applicable law or agreed to in writing, software
|
||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||
* License for the specific language governing permissions and limitations
|
||
* under the License.
|
||
*
|
||
****************************************************************************/
|
||
|
||
/* This file should never be included directly but, rather, only indirectly
|
||
* through nuttx/irq.h
|
||
*/
|
||
|
||
#ifndef __ARCH_XTENSA_INCLUDE_ESP32_IRQ_H
|
||
#define __ARCH_XTENSA_INCLUDE_ESP32_IRQ_H
|
||
|
||
/****************************************************************************
|
||
* Included Files
|
||
****************************************************************************/
|
||
|
||
#include <arch/esp32/chip.h>
|
||
|
||
/****************************************************************************
|
||
* Pre-processor Definitions
|
||
****************************************************************************/
|
||
|
||
/* CPU interrupt flags:
|
||
* These flags can be used to specify which interrupt qualities the
|
||
* code calling esp32_setup_irq needs.
|
||
*/
|
||
|
||
#define ESP32_CPUINT_FLAG_LEVEL (1 << 0) /* Level-triggered interrupt */
|
||
#define ESP32_CPUINT_FLAG_EDGE (1 << 1) /* Edge-triggered interrupt */
|
||
#define ESP32_CPUINT_FLAG_SHARED (1 << 2) /* Interrupt can be shared between ISRs */
|
||
#define ESP32_CPUINT_FLAG_IRAM (1 << 3) /* ISR can be called if cache is disabled */
|
||
|
||
/* Interrupt Matrix
|
||
*
|
||
* The Interrupt Matrix embedded in the ESP32 independently allocates
|
||
* peripheral interrupt sources to the two CPUs’ peripheral interrupts.
|
||
* This configuration is highly flexible in order to meet many different
|
||
* needs.
|
||
*
|
||
* Features
|
||
* - Accepts 71 peripheral interrupt sources as input.
|
||
* - Generates 26 peripheral interrupt sources per CPU as output (52 total).
|
||
* - CPU NMI Interrupt Mask.
|
||
* - Queries current interrupt status of peripheral interrupt sources.
|
||
*
|
||
* Peripheral Interrupt Source
|
||
*
|
||
* ESP32 has 71 peripheral interrupt sources in total. 67 of 71 ESP32
|
||
* peripheral interrupt sources can be allocated to either CPU. The four
|
||
* remaining peripheral interrupt sources are CPU-specific, two per CPU.
|
||
*
|
||
* - GPIO_INTERRUPT_PRO and GPIO_INTERRUPT_PRO_NMI can only be allocated to
|
||
* PRO_CPU.
|
||
* - GPIO_INTERRUPT_APP and GPIO_INTERRUPT_APP_NMI can only be allocated to
|
||
* APP_CPU.
|
||
*
|
||
* As a result, PRO_CPU and APP_CPU each have 69 peripheral interrupt
|
||
* sources.
|
||
*/
|
||
|
||
/* PRO_INTR_STATUS_REG_0 / APP_INTR_STATUS_REG_0 */
|
||
|
||
#define ESP32_PERIPH_MAC 0 /* INTR_STATUS_REG_0, bit 0 */
|
||
#define ESP32_PERIPH_MAC_NMI 1 /* INTR_STATUS_REG_0, bit 1 */
|
||
#define ESP32_PERIPH_BB 2 /* INTR_STATUS_REG_0, bit 2 */
|
||
#define ESP32_PERIPH_BB_MAC 3 /* INTR_STATUS_REG_0, bit 3 */
|
||
#define ESP32_PERIPH_BT_BB 4 /* INTR_STATUS_REG_0, bit 4 */
|
||
#define ESP32_PERIPH_BT_BB_NMI 5 /* INTR_STATUS_REG_0, bit 5 */
|
||
#define ESP32_PERIPH_RWBT_IRQ 6 /* INTR_STATUS_REG_0, bit 6 */
|
||
#define ESP32_PERIPH_RWBLE_IRQ 7 /* INTR_STATUS_REG_0, bit 7 */
|
||
#define ESP32_PERIPH_RWBT_NMI 8 /* INTR_STATUS_REG_0, bit 8 */
|
||
#define ESP32_PERIPH_RWBLE_NMI 9 /* INTR_STATUS_REG_0, bit 9 */
|
||
|
||
#define ESP32_PERIPH_SLC0 10 /* INTR_STATUS_REG_0, bit 10 */
|
||
#define ESP32_PERIPH_SLC1 11 /* INTR_STATUS_REG_0, bit 11 */
|
||
#define ESP32_PERIPH_UHCI0 12 /* INTR_STATUS_REG_0, bit 12 */
|
||
#define ESP32_PERIPH_UHCI1 13 /* INTR_STATUS_REG_0, bit 13 */
|
||
#define ESP32_PERIPH_TG_T0_LEVEL 14 /* INTR_STATUS_REG_0, bit 14 */
|
||
#define ESP32_PERIPH_TG_T1_LEVEL 15 /* INTR_STATUS_REG_0, bit 15 */
|
||
#define ESP32_PERIPH_TG_WDT_LEVEL 16 /* INTR_STATUS_REG_0, bit 16 */
|
||
#define ESP32_PERIPH_TG_LACT_LEVEL 17 /* INTR_STATUS_REG_0, bit 17 */
|
||
#define ESP32_PERIPH_TG1_T0_LEVEL 18 /* INTR_STATUS_REG_0, bit 18 */
|
||
#define ESP32_PERIPH_TG1_T1_LEVEL 19 /* INTR_STATUS_REG_0, bit 19 */
|
||
|
||
#define ESP32_PERIPH_TG1_WDT_LEVEL 20 /* INTR_STATUS_REG_0, bit 20 */
|
||
#define ESP32_PERIPH_G1_LACT_LEVEL 21 /* INTR_STATUS_REG_0, bit 21 */
|
||
#define ESP32_PERIPH_CPU_GPIO 22 /* INTR_STATUS_REG_0, bit 22 */
|
||
#define ESP32_PERIPH_CPU_NMI 23 /* INTR_STATUS_REG_0, bit 23 */
|
||
#define ESP32_PERIPH_CPU_CPU0 24 /* INTR_STATUS_REG_0, bit 24 */
|
||
#define ESP32_PERIPH_CPU_CPU1 25 /* INTR_STATUS_REG_0, bit 25 */
|
||
#define ESP32_PERIPH_CPU_CPU2 26 /* INTR_STATUS_REG_0, bit 26 */
|
||
#define ESP32_PERIPH_CPU_CPU3 27 /* INTR_STATUS_REG_0, bit 27 */
|
||
#define ESP32_PERIPH_SPI0 28 /* INTR_STATUS_REG_0, bit 28 */
|
||
#define ESP32_PERIPH_SPI1 29 /* INTR_STATUS_REG_0, bit 29 */
|
||
|
||
#define ESP32_PERIPH_SPI2 30 /* INTR_STATUS_REG_0, bit 30 */
|
||
#define ESP32_PERIPH_SPI3 31 /* INTR_STATUS_REG_0, bit 31 */
|
||
|
||
/* PRO_INTR_STATUS_REG_1 / APP_INTR_STATUS_REG_1 */
|
||
|
||
#define ESP32_PERIPH_I2S0 32 /* INTR_STATUS_REG_1, bit 0 */
|
||
#define ESP32_PERIPH_I2S1 33 /* INTR_STATUS_REG_1, bit 1 */
|
||
#define ESP32_PERIPH_UART 34 /* INTR_STATUS_REG_1, bit 2 */
|
||
#define ESP32_PERIPH_UART1 35 /* INTR_STATUS_REG_1, bit 3 */
|
||
#define ESP32_PERIPH_UART2 36 /* INTR_STATUS_REG_1, bit 4 */
|
||
#define ESP32_PERIPH_SDIO_HOST 37 /* INTR_STATUS_REG_1, bit 5 */
|
||
#define ESP32_PERIPH_EMAC 38 /* INTR_STATUS_REG_1, bit 6 */
|
||
#define ESP32_PERIPH_PWM0 39 /* INTR_STATUS_REG_1, bit 7 */
|
||
#define ESP32_PERIPH_PWM1 40 /* INTR_STATUS_REG_1, bit 8 */
|
||
#define ESP32_PERIPH_PWM2 41 /* INTR_STATUS_REG_1, bit 9 */
|
||
|
||
#define ESP32_PERIPH_PWM3 42 /* INTR_STATUS_REG_1, bit 10 */
|
||
#define ESP32_PERIPH_LEDC 43 /* INTR_STATUS_REG_1, bit 11 */
|
||
#define ESP32_PERIPH_EFUSE 44 /* INTR_STATUS_REG_1, bit 12 */
|
||
#define ESP32_PERIPH_TWAI 45 /* INTR_STATUS_REG_1, bit 13 */
|
||
#define ESP32_PERIPH_CAN ESP32_PERIPH_TWAI
|
||
#define ESP32_PERIPH_RTC_CORE 46 /* INTR_STATUS_REG_1, bit 14 */
|
||
#define ESP32_PERIPH_RMT 47 /* INTR_STATUS_REG_1, bit 15 */
|
||
#define ESP32_PERIPH_PCNT 48 /* INTR_STATUS_REG_1, bit 16 */
|
||
#define ESP32_PERIPH_I2C_EXT0 49 /* INTR_STATUS_REG_1, bit 17 */
|
||
#define ESP32_PERIPH_I2C_EXT1 50 /* INTR_STATUS_REG_1, bit 18 */
|
||
#define ESP32_PERIPH_RSA 51 /* INTR_STATUS_REG_1, bit 19 */
|
||
|
||
#define ESP32_PERIPH_SPI1_DMA 52 /* INTR_STATUS_REG_1, bit 20 */
|
||
#define ESP32_PERIPH_SPI2_DMA 53 /* INTR_STATUS_REG_1, bit 21 */
|
||
#define ESP32_PERIPH_SPI3_DMA 54 /* INTR_STATUS_REG_1, bit 22 */
|
||
#define ESP32_PERIPH_WDG 55 /* INTR_STATUS_REG_1, bit 23 */
|
||
#define ESP32_PERIPH_TIMER1 56 /* INTR_STATUS_REG_1, bit 24 */
|
||
#define ESP32_PERIPH_TIMER2 57 /* INTR_STATUS_REG_1, bit 25 */
|
||
#define ESP32_PERIPH_TG_T0_EDGE 58 /* INTR_STATUS_REG_1, bit 26 */
|
||
#define ESP32_PERIPH_TG_T1_EDGE 59 /* INTR_STATUS_REG_1, bit 27 */
|
||
#define ESP32_PERIPH_TG_WDT_EDGE 60 /* INTR_STATUS_REG_1, bit 28 */
|
||
#define ESP32_PERIPH_TG_LACT_EDGE 61 /* INTR_STATUS_REG_1, bit 29 */
|
||
|
||
#define ESP32_PERIPH_TG1_T0_EDGE 62 /* INTR_STATUS_REG_1, bit 30 */
|
||
#define ESP32_PERIPH_TG1_T1_EDGE 63 /* INTR_STATUS_REG_1, bit 31 */
|
||
|
||
/* PRO_INTR_STATUS_REG_2 / APP_INTR_STATUS_REG_2 */
|
||
|
||
#define ESP32_PERIPH_TG1_WDT_EDGE 64 /* INTR_STATUS_REG_2, bit 0 */
|
||
#define ESP32_PERIPH_TG1_LACT_EDGE 65 /* INTR_STATUS_REG_2, bit 1 */
|
||
#define ESP32_PERIPH_MMU_IA 66 /* INTR_STATUS_REG_2, bit 2 */
|
||
#define ESP32_PERIPH_MPU_IA 67 /* INTR_STATUS_REG_2, bit 3 */
|
||
#define ESP32_PERIPH_CACHE_IA 68 /* INTR_STATUS_REG_2, bit 4 */
|
||
|
||
/* Total number of peripherals */
|
||
|
||
#define ESP32_NPERIPHERALS 69
|
||
|
||
/* Exceptions
|
||
*
|
||
* IRAM Offset Description
|
||
* 0x0000 Windows
|
||
* 0x0180 Level 2 interrupt
|
||
* 0x01c0 Level 3 interrupt
|
||
* 0x0200 Level 4 interrupt
|
||
* 0x0240 Level 5 interrupt
|
||
* 0x0280 Debug exception
|
||
* 0x02c0 NMI exception
|
||
* 0x0300 Kernel exception
|
||
* 0x0340 User exception
|
||
* 0x03c0 Double exception
|
||
*
|
||
* REVISIT: In more architectures supported by NuttX, exception errors
|
||
* tie into the normal interrupt handling via special IRQ numbers.
|
||
* It is still to be determined what will be done for the ESP32.
|
||
*
|
||
*/
|
||
|
||
/* IRQ numbers for internal interrupts that are dispatched like peripheral
|
||
* interrupts
|
||
*/
|
||
|
||
#define XTENSA_IRQ_TIMER0 0 /* INTERRUPT, bit 6 */
|
||
#define XTENSA_IRQ_TIMER1 1 /* INTERRUPT, bit 15 */
|
||
#define XTENSA_IRQ_TIMER2 2 /* INTERRUPT, bit 16 */
|
||
#define XTENSA_IRQ_SYSCALL 3 /* User interrupt w/EXCCAUSE=syscall */
|
||
#define XTENSA_IRQ_SWINT 4 /* Software interrupt */
|
||
|
||
#define XTENSA_NIRQ_INTERNAL 5 /* Number of dispatch internal interrupts */
|
||
#define XTENSA_IRQ_FIRSTPERIPH 5 /* First peripheral IRQ number */
|
||
|
||
/* IRQ numbers for peripheral interrupts coming through the Interrupt
|
||
* Matrix.
|
||
*/
|
||
|
||
#define ESP32_IRQ2PERIPH(irq) ((irq)-XTENSA_IRQ_FIRSTPERIPH)
|
||
#define ESP32_PERIPH2IRQ(id) ((id)+XTENSA_IRQ_FIRSTPERIPH)
|
||
|
||
/* PRO_INTR_STATUS_REG_0 / APP_INTR_STATUS_REG_0 */
|
||
|
||
#define ESP32_IRQ_MAC (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_MAC)
|
||
#define ESP32_IRQ_MAC_NMI (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_MAC_NMI)
|
||
#define ESP32_IRQ_BB (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_BB)
|
||
#define ESP32_IRQ_BB_MAC (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_BB_MAC)
|
||
#define ESP32_IRQ_BT_BB (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_BT_BB)
|
||
#define ESP32_IRQ_BT_BB_NMI (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_BT_BB_NMI)
|
||
#define ESP32_IRQ_RWBT_IRQ (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_RWBT_IRQ)
|
||
#define ESP32_IRQ_RWBLE_IRQ (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_RWBLE_IRQ)
|
||
#define ESP32_IRQ_RWBT_NMI (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_RWBT_NMI)
|
||
#define ESP32_IRQ_RWBLE_NMI (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_RWBLE_NMI)
|
||
#define ESP32_IRQ_SLC0 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SLC0)
|
||
#define ESP32_IRQ_SLC1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SLC1)
|
||
#define ESP32_IRQ_UHCI0 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_UHCI0)
|
||
#define ESP32_IRQ_UHCI1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_UHCI1)
|
||
#define ESP32_IRQ_TG_T0_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_T0_LEVEL)
|
||
#define ESP32_IRQ_TG_T1_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_T1_LEVEL)
|
||
#define ESP32_IRQ_TG_WDT_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_WDT_LEVEL)
|
||
#define ESP32_IRQ_TG_LACT_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_LACT_LEVEL)
|
||
#define ESP32_IRQ_TG1_T0_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG1_T0_LEVEL)
|
||
#define ESP32_IRQ_TG1_T1_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG1_T1_LEVEL)
|
||
#define ESP32_IRQ_TG1_WDT_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG1_WDT_LEVEL)
|
||
#define ESP32_IRQ_G1_LACT_LEVEL (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_G1_LACT_LEVEL)
|
||
#define ESP32_IRQ_CPU_GPIO (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CPU_GPIO)
|
||
#define ESP32_IRQ_CPU_NMI (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CPU_NMI)
|
||
#define ESP32_IRQ_CPU_CPU0 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CPU_CPU0)
|
||
#define ESP32_IRQ_CPU_CPU1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CPU_CPU1)
|
||
#define ESP32_IRQ_CPU_CPU2 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CPU_CPU2)
|
||
#define ESP32_IRQ_CPU_CPU3 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CPU_CPU3)
|
||
#define ESP32_IRQ_SPI0 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SPI0)
|
||
#define ESP32_IRQ_SPI1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SPI1)
|
||
#define ESP32_IRQ_SPI2 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SPI2)
|
||
#define ESP32_IRQ_SPI3 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SPI3)
|
||
|
||
#define ESP32_IRQ_SREG0 ESP32_IRQ_MAC
|
||
#define ESP32_NIRQS_SREG0 32
|
||
|
||
/* PRO_INTR_STATUS_REG_1 / APP_INTR_STATUS_REG_1 */
|
||
|
||
#define ESP32_IRQ_I2S0 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_I2S0)
|
||
#define ESP32_IRQ_I2S1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_I2S1)
|
||
#define ESP32_IRQ_UART (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_UART)
|
||
#define ESP32_IRQ_UART1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_UART1)
|
||
#define ESP32_IRQ_UART2 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_UART2)
|
||
#define ESP32_IRQ_SDIO_HOST (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SDIO_HOST)
|
||
#define ESP32_IRQ_EMAC (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_EMAC)
|
||
#define ESP32_IRQ_PWM0 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_PWM0)
|
||
#define ESP32_IRQ_PWM1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_PWM1)
|
||
#define ESP32_IRQ_PWM2 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_PWM2)
|
||
#define ESP32_IRQ_PWM3 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_PWM3)
|
||
#define ESP32_IRQ_LEDC (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_LEDC)
|
||
#define ESP32_IRQ_EFUSE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_EFUSE)
|
||
#define ESP32_IRQ_TWAI (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CAN)
|
||
#define ESP32_IRQ_CAN ESP32_IRQ_TWAI
|
||
#define ESP32_IRQ_RTC_CORE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_RTC_CORE)
|
||
#define ESP32_IRQ_RMT (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_RMT)
|
||
#define ESP32_IRQ_PCNT (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_PCNT)
|
||
#define ESP32_IRQ_I2C_EXT0 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_I2C_EXT0)
|
||
#define ESP32_IRQ_I2C_EXT1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_I2C_EXT1)
|
||
#define ESP32_IRQ_RSA (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_RSA)
|
||
#define ESP32_IRQ_SPI1_DMA (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SPI1_DMA)
|
||
#define ESP32_IRQ_SPI2_DMA (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SPI2_DMA)
|
||
#define ESP32_IRQ_SPI3_DMA (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_SPI3_DMA)
|
||
#define ESP32_IRQ_WDG (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_WDG)
|
||
#define ESP32_IRQ_TIMER1 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TIMER1)
|
||
#define ESP32_IRQ_TIMER2 (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TIMER2)
|
||
#define ESP32_IRQ_TG_T0_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_T0_EDGE)
|
||
#define ESP32_IRQ_TG_T1_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_T1_EDGE)
|
||
#define ESP32_IRQ_TG_WDT_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_WDT_EDGE)
|
||
#define ESP32_IRQ_TG_LACT_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG_LACT_EDGE)
|
||
#define ESP32_IRQ_TG1_T0_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG1_T0_EDGE)
|
||
#define ESP32_IRQ_TG1_T1_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG1_T1_EDGE)
|
||
|
||
#define ESP32_IRQ_SREG1 ESP32_IRQ_I2S0
|
||
#define ESP32_NIRQS_SREG1 32
|
||
|
||
/* PRO_INTR_STATUS_REG_2 / APP_INTR_STATUS_REG_2 */
|
||
|
||
#define ESP32_IRQ_TG1_WDT_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG1_WDT_EDGE)
|
||
#define ESP32_IRQ_TG1_LACT_EDGE (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_TG1_LACT_EDGE)
|
||
#define ESP32_IRQ_MMU_IA (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_MMU_IA)
|
||
#define ESP32_IRQ_MPU_IA (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_MPU_IA)
|
||
#define ESP32_IRQ_CACHE_IA (XTENSA_IRQ_FIRSTPERIPH+ESP32_PERIPH_CACHE_IA)
|
||
|
||
#define ESP32_IRQ_SREG2 ESP32_IRQ_TG1_WDT_EDGE
|
||
#define ESP32_NIRQS_SREG2 5
|
||
|
||
#define ESP32_NIRQ_PERIPH ESP32_NPERIPHERALS
|
||
|
||
#ifdef CONFIG_ESP32_GPIO_IRQ
|
||
|
||
/* The PRO and APP CPU have different interrupts sources for the GPIO
|
||
* peripheral. Each CPU needs to allocate a separate interrupt and attach
|
||
* it to its peripheral.
|
||
* Here we add a separate IRQ to differentiate between each interrupt.
|
||
* When enabling/disabling the IRQ we handle the APP's GPIO separately
|
||
* to correctly retrieve the peripheral.
|
||
*/
|
||
|
||
# ifdef CONFIG_SMP
|
||
# define ESP32_IRQ_APPCPU_GPIO ESP32_NPERIPHERALS
|
||
# undef ESP32_NIRQ_PERIPH
|
||
# define ESP32_NIRQ_PERIPH ESP32_NPERIPHERALS + 1
|
||
# endif
|
||
|
||
/* Second level GPIO interrupts. GPIO interrupts are decoded and dispatched
|
||
* as a second level of decoding: The first level dispatches to the GPIO
|
||
* interrupt handler. The second to the decoded GPIO interrupt handler.
|
||
*/
|
||
|
||
# define ESP32_NIRQ_GPIO 40
|
||
# define ESP32_FIRST_GPIOIRQ (XTENSA_NIRQ_INTERNAL+ESP32_NIRQ_PERIPH)
|
||
# define ESP32_LAST_GPIOIRQ (ESP32_FIRST_GPIOIRQ+ESP32_NIRQ_GPIO-1)
|
||
# define ESP32_PIN2IRQ(p) ((p) + ESP32_FIRST_GPIOIRQ)
|
||
# define ESP32_IRQ2PIN(i) ((i) - ESP32_FIRST_GPIOIRQ)
|
||
#else
|
||
# define ESP32_NIRQ_GPIO 0
|
||
#endif
|
||
|
||
#ifdef CONFIG_ESP32_RTCIO_IRQ
|
||
|
||
/* Second level RTC interrupts. RTC interrupts are decoded and dispatched
|
||
* as a second level of decoding: The first level dispatches to the RTC
|
||
* interrupt handler. The second to the decoded RTC interrupt handler.
|
||
* A third level might be required to be implemented on the driver (e.g.
|
||
* Touch pads)
|
||
*/
|
||
|
||
# define ESP32_NIRQ_RTCIO_PERIPH 9
|
||
# define ESP32_NIRQ_RTCIO_TOUCHPAD 10
|
||
# define ESP32_NIRQ_RTCIO (ESP32_NIRQ_RTCIO_PERIPH+ESP32_NIRQ_RTCIO_TOUCHPAD)
|
||
|
||
# define ESP32_FIRST_RTCIOIRQ_PERIPH (XTENSA_NIRQ_INTERNAL+ESP32_NIRQ_PERIPH+ESP32_NIRQ_GPIO)
|
||
# define ESP32_LAST_RTCIOIRQ_PERIPH (ESP32_FIRST_RTCIOIRQ_PERIPH+ESP32_NIRQ_RTCIO_PERIPH-1)
|
||
# define ESP32_IRQ_RTC_SLP_WAKEUP (ESP32_FIRST_RTCIOIRQ_PERIPH+0)
|
||
# define ESP32_IRQ_RTC_SLP_REJECT (ESP32_FIRST_RTCIOIRQ_PERIPH+1)
|
||
# define ESP32_IRQ_RTC_SDIO_IDLE (ESP32_FIRST_RTCIOIRQ_PERIPH+2)
|
||
# define ESP32_IRQ_RTC_WDT (ESP32_FIRST_RTCIOIRQ_PERIPH+3)
|
||
# define ESP32_IRQ_RTC_TIME_VALID (ESP32_FIRST_RTCIOIRQ_PERIPH+4)
|
||
# define ESP32_IRQ_RTC_SAR (ESP32_FIRST_RTCIOIRQ_PERIPH+5)
|
||
# define ESP32_IRQ_RTC_TOUCH (ESP32_FIRST_RTCIOIRQ_PERIPH+6)
|
||
# define ESP32_IRQ_RTC_BROWN_OUT (ESP32_FIRST_RTCIOIRQ_PERIPH+7)
|
||
# define ESP32_IRQ_RTC_MAIN_TIMER (ESP32_FIRST_RTCIOIRQ_PERIPH+8)
|
||
|
||
# define ESP32_FIRST_RTCIOIRQ_TOUCHPAD (ESP32_LAST_RTCIOIRQ_PERIPH+1)
|
||
# define ESP32_LAST_RTCIOIRQ_TOUCHPAD (ESP32_FIRST_RTCIOIRQ_TOUCHPAD+ESP32_NIRQ_RTCIO_TOUCHPAD-1)
|
||
# define ESP32_TOUCHPAD2IRQ(t) ((t) + ESP32_FIRST_RTCIOIRQ_TOUCHPAD)
|
||
# define ESP32_IRQ2TOUCHPAD(i) ((i) - ESP32_FIRST_RTCIOIRQ_TOUCHPAD)
|
||
#else
|
||
# define ESP32_NIRQ_RTCIO 0
|
||
#endif
|
||
|
||
/* Total number of interrupts */
|
||
|
||
#define NR_IRQS (XTENSA_NIRQ_INTERNAL+ESP32_NIRQ_PERIPH+ESP32_NIRQ_GPIO+ESP32_NIRQ_RTCIO)
|
||
|
||
/* Xtensa CPU Interrupts.
|
||
*
|
||
* Each of the two CPUs (PRO and APP) have 32 interrupts each, of which
|
||
* 26 can be mapped to peripheral interrupts:
|
||
*
|
||
* Level triggered peripherals (21 total):
|
||
* 0-5, 8-9, 12-13, 17-18 - Priority 1
|
||
* 19-21 - Priority 2
|
||
* 23, 27 - Priority 3
|
||
* 24-25 - Priority 4
|
||
* 26, 31 - Priority 5
|
||
* Edge triggered peripherals (4 total):
|
||
* 10 - Priority 1
|
||
* 22 - Priority 3
|
||
* 28, 30 - Priority 4
|
||
* NMI (1 total):
|
||
* 14 - NMI
|
||
*
|
||
* CPU peripheral interrupts can be a assigned to a CPU interrupt using the
|
||
* PRO_*_MAP_REG or APP_*_MAP_REG. There are a pair of these registers for
|
||
* each peripheral source. Multiple peripheral interrupt sources can be
|
||
* mapped to the same CPU interrupt.
|
||
*
|
||
* The remaining, six, internal CPU interrupts are:
|
||
*
|
||
* 6 Timer0 - Priority 1
|
||
* 7 Software - Priority 1
|
||
* 11 Profiling - Priority 3
|
||
* 15 Timer1 - Priority 3
|
||
* 16 Timer2 - Priority 5
|
||
* 29 Software - Priority 3
|
||
*
|
||
* A peripheral interrupt can be disabled
|
||
*/
|
||
|
||
#define ESP32_CPUINT_LEVELPERIPH_0 0
|
||
#define ESP32_CPUINT_LEVELPERIPH_1 1
|
||
#define ESP32_CPUINT_LEVELPERIPH_2 2
|
||
#define ESP32_CPUINT_LEVELPERIPH_3 3
|
||
#define ESP32_CPUINT_LEVELPERIPH_4 4
|
||
#define ESP32_CPUINT_LEVELPERIPH_5 5
|
||
#define ESP32_CPUINT_LEVELPERIPH_6 8
|
||
#define ESP32_CPUINT_LEVELPERIPH_7 9
|
||
#define ESP32_CPUINT_LEVELPERIPH_8 12
|
||
#define ESP32_CPUINT_LEVELPERIPH_9 13
|
||
#define ESP32_CPUINT_LEVELPERIPH_10 17
|
||
#define ESP32_CPUINT_LEVELPERIPH_11 18
|
||
#define ESP32_CPUINT_LEVELPERIPH_12 19
|
||
#define ESP32_CPUINT_LEVELPERIPH_13 20
|
||
#define ESP32_CPUINT_LEVELPERIPH_14 21
|
||
#define ESP32_CPUINT_LEVELPERIPH_15 23
|
||
#define ESP32_CPUINT_LEVELPERIPH_16 24
|
||
#define ESP32_CPUINT_LEVELPERIPH_17 25
|
||
#define ESP32_CPUINT_LEVELPERIPH_18 26
|
||
#define ESP32_CPUINT_LEVELPERIPH_19 27
|
||
#define ESP32_CPUINT_LEVELPERIPH_20 31
|
||
|
||
#define ESP32_CPUINT_NLEVELPERIPHS 21
|
||
#define ESP32_CPUINT_LEVELSET 0x8fbe333f
|
||
|
||
#define ESP32_CPUINT_EDGEPERIPH_0 10
|
||
#define ESP32_CPUINT_EDGEPERIPH_1 22
|
||
#define ESP32_CPUINT_EDGEPERIPH_2 28
|
||
#define ESP32_CPUINT_EDGEPERIPH_3 30
|
||
|
||
#define ESP32_CPUINT_NEDGEPERIPHS 4
|
||
#define ESP32_CPUINT_EDGESET 0x50400400
|
||
|
||
#define ESP32_CPUINT_NNMIPERIPHS 1
|
||
#define ESP32_CPUINT_NMISET 0x00004000
|
||
|
||
#define ESP32_CPUINT_MAC 0
|
||
#define ESP32_CPUINT_TIMER0 6
|
||
#define ESP32_CPUINT_SOFTWARE0 7
|
||
#define ESP32_CPUINT_PROFILING 11
|
||
#define ESP32_CPUINT_TIMER1 15
|
||
#define ESP32_CPUINT_TIMER2 16
|
||
#define ESP32_CPUINT_SOFTWARE1 29
|
||
|
||
#define ESP32_CPUINT_NINTERNAL 6
|
||
|
||
#define ESP32_NCPUINTS 32
|
||
#define ESP32_CPUINT_MAX (ESP32_NCPUINTS - 1)
|
||
#define ESP32_CPUINT_PERIPHSET 0xdffe741f
|
||
#define ESP32_CPUINT_INTERNALSET 0x200188c0
|
||
|
||
/* Priority 1: 0-10, 12-13, 17-18 (15)
|
||
* Priority 2: 19-21 (3)
|
||
* Priority 3: 11, 15, 22-23, 27, 29 (6)
|
||
* Priority 4: 24-25, 28, 30 (4)
|
||
* Priority 5: 16, 26, 31 (3)
|
||
* Priority NMI: 14 (1)
|
||
*/
|
||
|
||
#define ESP32_INTPRI1_MASK 0x000637ff
|
||
#define ESP32_INTPRI2_MASK 0x00380000
|
||
#define ESP32_INTPRI3_MASK 0x28c08800
|
||
#define ESP32_INTPRI4_MASK 0x53000000
|
||
#define ESP32_INTPRI5_MASK 0x84010000
|
||
#define ESP32_INTNMI_MASK 0x00004000
|
||
|
||
/****************************************************************************
|
||
* Public Types
|
||
****************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
/****************************************************************************
|
||
* Inline functions
|
||
****************************************************************************/
|
||
|
||
#ifdef CONFIG_ESP32_GPIO_IRQ
|
||
#ifdef CONFIG_SMP
|
||
static inline int esp32_irq_gpio(int cpu)
|
||
{
|
||
if (cpu == 0)
|
||
{
|
||
return ESP32_IRQ_CPU_GPIO;
|
||
}
|
||
else
|
||
{
|
||
return ESP32_IRQ_APPCPU_GPIO;
|
||
}
|
||
}
|
||
#else
|
||
# define esp32_irq_gpio(c) (UNUSED(c), ESP32_IRQ_CPU_GPIO)
|
||
#endif
|
||
#endif
|
||
|
||
/****************************************************************************
|
||
* Public Data
|
||
****************************************************************************/
|
||
|
||
/****************************************************************************
|
||
* Public Function Prototypes
|
||
****************************************************************************/
|
||
|
||
#ifdef __cplusplus
|
||
#define EXTERN extern "C"
|
||
extern "C"
|
||
{
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
#undef EXTERN
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __ARCH_XTENSA_INCLUDE_ESP32_IRQ_H */
|