109 lines
3.0 KiB
Plaintext
109 lines
3.0 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
|
#
|
|
|
|
if ARCH_BOARD_METRO_M4
|
|
|
|
choice
|
|
prompt "Execution memory"
|
|
default METRO_M4_RUNFROMFLASH
|
|
|
|
config METRO_M4_RUNFROMFLASH
|
|
bool "Run from FLASH"
|
|
depends on BOOT_RUNFROMFLASH
|
|
---help---
|
|
This is the normal configuration for building METRO M4 code.
|
|
|
|
config METRO_M4_RUNFROMSRAM
|
|
bool "Run from SRAM"
|
|
depends on BOOT_RUNFROMISRAM
|
|
---help---
|
|
During early bring-up, it is safer to execute entirely from
|
|
SRAM until you are confident in the initialization logic.
|
|
Then you can safely switch to FLASH.
|
|
|
|
REVISIT: This auto-selects CONFIG_BOOT_RUNFROMISRAM but I have
|
|
found, with some difficulty, that that choice still defaults to
|
|
CONFIG_BOOT_RUNFROMFLASH, causing link-time failures when running
|
|
from SRAM.
|
|
|
|
endchoice # Execution memory
|
|
|
|
config METRO_M4_32KHZXTAL
|
|
bool "32.768 KHz XTAL"
|
|
default n
|
|
---help---
|
|
According to the schematic, a 32.768 KHz crystal is installed on
|
|
board. However, I have been unable to use this crystal and thought
|
|
perhaps it is missing or defective on my board (there is a metal
|
|
package that could be a crystal on board, but I am not certain).
|
|
Another, more likely option is that there is a coding error on my
|
|
part that prevents the 32.768 KHz crystal from usable(?)
|
|
|
|
The configuration defaults to using the always-on OSCULP32 as the
|
|
slow clock source. This option will select instead XOSC32 as the
|
|
slow clock source.
|
|
|
|
config METRO_M4_AT24_BLOCKMOUNT
|
|
bool "AT24 Serial EEPROM auto-mount"
|
|
default n
|
|
depends on MTD_AT24XX
|
|
---help---
|
|
Automatically initialize the AT24 I2C EEPROM driver when NSH starts.
|
|
|
|
choice
|
|
prompt "AT24 serial EPPROM configuration"
|
|
default METRO_M4_AT24_FTL
|
|
depends on METRO_M4_AT24_BLOCKMOUNT
|
|
|
|
config METRO_M4_AT24_FTL
|
|
bool "Create AT24 block driver"
|
|
---help---
|
|
Create the MTD driver for the AT24 and "wrap" the AT24 as a standard
|
|
block driver that could then, for example, be mounted using FAT or
|
|
any other file system. Any file system may be used, but there will
|
|
be no wear-leveling.
|
|
|
|
config METRO_M4_AT24_NXFFS
|
|
bool "Create AT24 NXFFS file system"
|
|
depends on FS_NXFFS
|
|
---help---
|
|
Create the MTD driver for the AT24 and mount the AT24 device as
|
|
a wear-leveling, NuttX FLASH file system (NXFFS). The downside of
|
|
NXFFS is that it can be very slow.
|
|
|
|
endchoice # AT24 serial EPPROM configuration
|
|
|
|
if FS_AUTOMOUNTER
|
|
config METRO_M4_USB_AUTOMOUNT
|
|
bool "USB automounter"
|
|
default n
|
|
|
|
if METRO_M4_USB_AUTOMOUNT
|
|
|
|
config METRO_M4_USB_AUTOMOUNT_FSTYPE
|
|
string "USB file system type"
|
|
default "vfat"
|
|
|
|
config METRO_M4_USB_AUTOMOUNT_BLKDEV
|
|
string "USB block device"
|
|
default "/dev/sda"
|
|
|
|
config METRO_M4_USB_AUTOMOUNT_MOUNTPOINT
|
|
string "USB mount point"
|
|
default "/mnt/usb"
|
|
|
|
config METRO_M4_USB_AUTOMOUNT_DDELAY
|
|
int "USB debounce delay (milliseconds)"
|
|
default 1000
|
|
|
|
config METRO_M4_USB_AUTOMOUNT_UDELAY
|
|
int "USB unmount retry delay (milliseconds)"
|
|
default 2000
|
|
|
|
endif # METRO_M4_USB_AUTOMOUNT
|
|
endif # FS_AUTOMOUNTER
|
|
|
|
endif # ARCH_BOARD_METRO_M4
|