incubator-nuttx/drivers/sensors/bh1749nuc_base.c

174 lines
4.7 KiB
C

/****************************************************************************
* drivers/sensors/bh1749nuc_base.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include "bh1749nuc_base.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: bh1749nuc_getreg8
*
* Description:
* Read from an 8-bit BH1749NUC register
*
****************************************************************************/
uint8_t bh1749nuc_getreg8(FAR struct bh1749nuc_dev_s *priv, uint8_t regaddr)
{
struct i2c_msg_s msg[2];
uint8_t regval = 0;
int ret;
msg[0].frequency = priv->freq;
msg[0].addr = priv->addr;
msg[0].flags = I2C_M_NOSTOP;
msg[0].buffer = &regaddr;
msg[0].length = 1;
msg[1].frequency = priv->freq;
msg[1].addr = priv->addr;
msg[1].flags = I2C_M_READ;
msg[1].buffer = &regval;
msg[1].length = 1;
ret = I2C_TRANSFER(priv->i2c, msg, 2);
if (ret < 0)
{
snerr("I2C_TRANSFER failed: %d\n", ret);
}
return regval;
}
/****************************************************************************
* Name: bh1749nuc_read16
*
* Description:
* Read 16-bit register
*
****************************************************************************/
uint16_t bh1749nuc_read16(FAR struct bh1749nuc_dev_s *priv, uint8_t regaddr)
{
struct i2c_msg_s msg[2];
uint8_t regval[2];
int ret;
msg[0].frequency = priv->freq;
msg[0].addr = priv->addr;
msg[0].flags = I2C_M_NOSTOP;
msg[0].buffer = &regaddr;
msg[0].length = 1;
msg[1].frequency = priv->freq;
msg[1].addr = priv->addr;
msg[1].flags = I2C_M_READ;
msg[1].buffer = (FAR uint8_t *)&regval;
msg[1].length = 2;
ret = I2C_TRANSFER(priv->i2c, msg, 2);
if (ret < 0)
{
snerr("I2C_TRANSFER failed: %d\n", ret);
}
return regval[1] << 8 | regval[0] << 0;
}
/****************************************************************************
* Name: bh1749nuc_putreg8
*
* Description:
* Write to an 8-bit BH1749NUC register
*
****************************************************************************/
void bh1749nuc_putreg8(FAR struct bh1749nuc_dev_s *priv,
uint8_t regaddr, uint8_t regval)
{
struct i2c_msg_s msg[2];
uint8_t txbuffer[2];
int ret;
txbuffer[0] = regaddr;
txbuffer[1] = regval;
msg[0].frequency = priv->freq;
msg[0].addr = priv->addr;
msg[0].flags = 0;
msg[0].buffer = txbuffer;
msg[0].length = 2;
ret = I2C_TRANSFER(priv->i2c, msg, 1);
if (ret < 0)
{
snerr("I2C_TRANSFER failed: %d\n", ret);
}
}
/****************************************************************************
* Name: bh1749nuc_checkid
*
* Description:
* Read and verify the BH1749NUC chip ID
*
****************************************************************************/
int bh1749nuc_checkid(FAR struct bh1749nuc_dev_s *priv)
{
uint8_t id;
/* Read Manufact ID */
id = bh1749nuc_getreg8(priv, BH1749NUC_MANUFACTURER_ID);
if (id != BH1749NUC_MANUFACTID)
{
/* Manufact ID is not Correct */
snerr("Wrong Manufact ID! %02x\n", id);
return -ENODEV;
}
/* Read Part ID */
id = bh1749nuc_getreg8(priv, BH1749NUC_SYSTEM_CONTROL);
if ((id & 0x3f) != BH1749NUC_PARTID)
{
/* Part ID is not Correct */
snerr("Wrong Part ID! %02x\n", id);
return -ENODEV;
}
return OK;
}