373 lines
12 KiB
C
373 lines
12 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32h7/weact-stm32h743/include/board.h
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STM32H7_WEACT_STM32H743_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_STM32H7_WEACT_STM32H743_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
/* Do not include STM32 H7 header files here */
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* The WeAct STM32H743 board provides the following clock sources:
|
|
*
|
|
* MCO: 8 MHz from MCO output of ST-LINK is used as input clock (default)
|
|
* X2: 32.768 KHz crystal for LSE
|
|
* X3: HSE crystal oscillator (not provided)
|
|
*
|
|
* So we have these clock source available within the STM32
|
|
*
|
|
* HSI: 16 MHz RC factory-trimmed
|
|
* LSI: 32 KHz RC
|
|
* HSE: 25 MHz crystal
|
|
* LSE: 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 25000000ul
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul
|
|
#define STM32_LSI_FREQUENCY 32000
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768
|
|
|
|
/* Main PLL Configuration.
|
|
*
|
|
* PLL source is HSE = 25,000,000
|
|
*
|
|
* When STM32_HSE_FREQUENCY / PLLM <= 2MHz VCOL must be selected.
|
|
* VCOH otherwise.
|
|
*
|
|
* PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
|
* Subject to:
|
|
*
|
|
* 1 <= PLLM <= 63
|
|
* 4 <= PLLN <= 512
|
|
* 150 MHz <= PLL_VCOL <= 420MHz
|
|
* 192 MHz <= PLL_VCOH <= 836MHz
|
|
*
|
|
* SYSCLK = PLL_VCO / PLLP
|
|
* CPUCLK = SYSCLK / D1CPRE
|
|
* Subject to
|
|
*
|
|
* PLLP1 = {2, 4, 6, 8, ..., 128}
|
|
* PLLP2,3 = {2, 3, 4, ..., 128}
|
|
* CPUCLK <= 400 MHz
|
|
*/
|
|
|
|
#define STM32_BOARD_USEHSE
|
|
|
|
#define STM32_PLLCFG_PLLSRC RCC_PLLCKSELR_PLLSRC_HSE
|
|
|
|
/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
|
|
*
|
|
* PLL1_VCO = (25 MHz / 5) * 192 = 960 MHz
|
|
*
|
|
* PLL1P = PLL1_VCO/2 = 800 MHz / 2 = 480 MHz
|
|
* PLL1Q = PLL1_VCO/4 = 800 MHz / 4 = 240 MHz
|
|
* PLL1R = PLL1_VCO/8 = 800 MHz / 4 = 240 MHz
|
|
*/
|
|
|
|
#define STM32_PLLCFG_PLL1CFG (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
|
|
RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
|
|
RCC_PLLCFGR_DIVP1EN | \
|
|
RCC_PLLCFGR_DIVQ1EN | \
|
|
RCC_PLLCFGR_DIVR1EN)
|
|
|
|
#define STM32_VCO1_FREQUENCY ((STM32_HSE_FREQUENCY / 5) * 192)
|
|
#define STM32_PLL1P_FREQUENCY (STM32_VCO1_FREQUENCY / 2)
|
|
#define STM32_PLL1Q_FREQUENCY (STM32_VCO1_FREQUENCY / 4)
|
|
#define STM32_PLL1R_FREQUENCY (STM32_VCO1_FREQUENCY / 4)
|
|
|
|
#define STM32_PLLCFG_PLL1M RCC_PLLCKSELR_DIVM1(5)
|
|
#define STM32_PLLCFG_PLL1N RCC_PLL1DIVR_N1(192)
|
|
#define STM32_PLLCFG_PLL1P RCC_PLL1DIVR_P1(2)
|
|
#define STM32_PLLCFG_PLL1Q RCC_PLL1DIVR_Q1(4)
|
|
#define STM32_PLLCFG_PLL1R RCC_PLL1DIVR_R1(4)
|
|
|
|
/* PLL2, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
|
|
*
|
|
* PLL1_VCO = (25 MHz / 2) * 48 = 600 MHz
|
|
*
|
|
* PLL2P = PLL2_VCO/2 = 600 MHz / 8 = 75 MHz
|
|
* PLL2Q = PLL2_VCO/4 = 600 MHz / 40 = 15 MHz
|
|
* PLL2R = PLL2_VCO/8 = 600 MHz / 3 = 200 MHz
|
|
*/
|
|
#define STM32_PLLCFG_PLL2CFG (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
|
|
RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
|
|
RCC_PLLCFGR_DIVP2EN | \
|
|
RCC_PLLCFGR_DIVQ2EN | \
|
|
RCC_PLLCFGR_DIVR2EN )
|
|
|
|
#define STM32_VCO2_FREQUENCY ((STM32_HSE_FREQUENCY / 2) * 48)
|
|
#define STM32_PLL2P_FREQUENCY (STM32_VCO2_FREQUENCY / 8)
|
|
#define STM32_PLL2Q_FREQUENCY (STM32_VCO2_FREQUENCY / 40)
|
|
#define STM32_PLL2R_FREQUENCY (STM32_VCO2_FREQUENCY / 3)
|
|
|
|
#define STM32_PLLCFG_PLL2M RCC_PLLCKSELR_DIVM2(2)
|
|
#define STM32_PLLCFG_PLL2N RCC_PLL2DIVR_N2(48)
|
|
#define STM32_PLLCFG_PLL2P RCC_PLL2DIVR_P2(8)
|
|
#define STM32_PLLCFG_PLL2Q RCC_PLL2DIVR_Q2(40)
|
|
#define STM32_PLLCFG_PLL2R RCC_PLL2DIVR_R2(3)
|
|
|
|
/* PLL3 */
|
|
|
|
#define STM32_PLLCFG_PLL3CFG 0
|
|
#define STM32_PLLCFG_PLL3M 0
|
|
#define STM32_PLLCFG_PLL3N 0
|
|
#define STM32_PLLCFG_PLL3P 0
|
|
#define STM32_PLLCFG_PLL3Q 0
|
|
#define STM32_PLLCFG_PLL3R 0
|
|
|
|
#define STM32_VCO3_FREQUENCY
|
|
#define STM32_PLL3P_FREQUENCY
|
|
#define STM32_PLL3Q_FREQUENCY
|
|
#define STM32_PLL3R_FREQUENCY
|
|
|
|
/* SYSCLK = PLL1P = 480 MHz
|
|
* CPUCLK = SYSCLK / 1 = 480 MHz
|
|
*/
|
|
|
|
#define STM32_RCC_D1CFGR_D1CPRE (RCC_D1CFGR_D1CPRE_SYSCLK)
|
|
#define STM32_SYSCLK_FREQUENCY (STM32_PLL1P_FREQUENCY)
|
|
#define STM32_CPUCLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 1)
|
|
|
|
/* Configure Clock Assignments */
|
|
|
|
/* AHB clock (HCLK) is SYSCLK/2 (480 MHz max)
|
|
* HCLK1 = HCLK2 = HCLK3 = HCLK4
|
|
*/
|
|
|
|
#define STM32_RCC_D1CFGR_HPRE RCC_D1CFGR_HPRE_SYSCLKd2 /* HCLK = SYSCLK / 2 */
|
|
#define STM32_ACLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 2) /* ACLK in D1, HCLK3 in D1 */
|
|
#define STM32_HCLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 2) /* HCLK in D2, HCLK4 in D3 */
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
|
|
|
|
#define STM32_RCC_D2CFGR_D2PPRE1 RCC_D2CFGR_D2PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
|
|
|
|
#define STM32_RCC_D2CFGR_D2PPRE2 RCC_D2CFGR_D2PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
|
|
|
|
#define STM32_RCC_D1CFGR_D1PPRE RCC_D1CFGR_D1PPRE_HCLKd2 /* PCLK3 = HCLK / 2 */
|
|
#define STM32_PCLK3_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB4 clock (PCLK4) is HCLK/2 (120 MHz) */
|
|
|
|
#define STM32_RCC_D3CFGR_D3PPRE RCC_D3CFGR_D3PPRE_HCLKd2 /* PCLK4 = HCLK / 2 */
|
|
#define STM32_PCLK4_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* Timer clock frequencies */
|
|
|
|
/* Timers driven from APB1 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* Timers driven from APB2 will be twice PCLK2 */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM15_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM16_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM17_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
/* Kernel Clock Configuration
|
|
*
|
|
* Note: look at Table 54 in ST Manual
|
|
*/
|
|
|
|
/* I2C123 clock source - HSI */
|
|
|
|
#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
|
|
|
|
/* I2C4 clock source - HSI */
|
|
|
|
#define STM32_RCC_D3CCIPR_I2C4SRC RCC_D3CCIPR_I2C4SEL_HSI
|
|
|
|
/* SPI123 clock source - PLL1Q */
|
|
|
|
#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL1
|
|
|
|
/* SPI45 clock source - APB (PCLK2?) */
|
|
|
|
#define STM32_RCC_D2CCIP1R_SPI45SRC RCC_D2CCIP1R_SPI45SEL_APB
|
|
|
|
/* SPI6 clock source - APB (PCLK4) */
|
|
|
|
#define STM32_RCC_D3CCIPR_SPI6SRC RCC_D3CCIPR_SPI6SEL_PCLK4
|
|
|
|
/* USB 1 and 2 clock source - HSI48 */
|
|
|
|
#define STM32_RCC_D2CCIP2R_USBSRC RCC_D2CCIP2R_USBSEL_HSI48
|
|
|
|
/* ADC 1 2 3 clock source - pll2_pclk */
|
|
|
|
#define STM32_RCC_D3CCIPR_ADCSRC RCC_D3CCIPR_ADCSEL_PLL2
|
|
|
|
/* FLASH wait states
|
|
*
|
|
* ------------ ---------- -----------
|
|
* Vcore MAX ACLK WAIT STATES
|
|
* ------------ ---------- -----------
|
|
* 1.15-1.26 V 70 MHz 0
|
|
* (VOS1 level) 140 MHz 1
|
|
* 210 MHz 2
|
|
* 1.05-1.15 V 55 MHz 0
|
|
* (VOS2 level) 110 MHz 1
|
|
* 165 MHz 2
|
|
* 220 MHz 3
|
|
* 0.95-1.05 V 45 MHz 0
|
|
* (VOS3 level) 90 MHz 1
|
|
* 135 MHz 2
|
|
* 180 MHz 3
|
|
* 225 MHz 4
|
|
* ------------ ---------- -----------
|
|
*/
|
|
|
|
#define BOARD_FLASH_WAITSTATES 4
|
|
|
|
/* SDMMC definitions ********************************************************/
|
|
|
|
/* Init 400 kHz, PLL1Q/(2*300) = 240 MHz / (2*300) = 400 Khz */
|
|
|
|
#define STM32_SDMMC_INIT_CLKDIV (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
|
|
/* Just set these to 24 MHz for now,
|
|
* PLL1Q/(2*5) = 240 MHz / (2*5) = 24 MHz
|
|
*/
|
|
|
|
#define STM32_SDMMC_MMCXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
#define STM32_SDMMC_SDXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
|
|
#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE
|
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
/* The board has 1 user LED that could be used this diagnostic LED too.
|
|
*
|
|
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in
|
|
* any way.
|
|
* The following definitions are used to access individual LEDs.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
|
|
* include/board.h and src/stm32_leds.c.
|
|
* The LEDs are used to encode OS-related events as follows:
|
|
*
|
|
*
|
|
* SYMBOL Meaning LED state
|
|
* Red Green Blue
|
|
* ---------------------- -------------------------- ------ ------ ---
|
|
*/
|
|
|
|
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
|
|
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
|
|
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
|
|
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
|
|
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
|
|
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
|
|
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
|
|
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
|
|
#define LED_IDLE 8 /* MCU is is sleep mode ON OFF OFF */
|
|
|
|
/* Thus if the Green LED is statically on, NuttX has successfully booted and
|
|
* is, apparently, running normally. If the Red LED is flashing at
|
|
* approximately 2Hz, then a fatal error has been detected and the system
|
|
* has halted.
|
|
*/
|
|
|
|
/* Button definitions *******************************************************/
|
|
|
|
/* The WeAct-STM32H743 board has two user buttons */
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
|
|
/* USART1 (Serial Console) */
|
|
|
|
#define GPIO_USART1_RX (GPIO_USART1_RX_1 | GPIO_SPEED_100MHz) /* PB15 */
|
|
#define GPIO_USART1_TX (GPIO_USART1_TX_1 | GPIO_SPEED_100MHz) /* PB14 */
|
|
|
|
/* OTGFS */
|
|
|
|
#define GPIO_OTGFS_DM (GPIO_OTGFS_DM_0|GPIO_SPEED_100MHz) /* PA11 */
|
|
#define GPIO_OTGFS_DP (GPIO_OTGFS_DP_0|GPIO_SPEED_100MHz) /* PA12 */
|
|
#define GPIO_OTGFS_ID (GPIO_OTGFS_ID_0|GPIO_SPEED_100MHz) /* PA10 */
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Function Prototypes
|
|
****************************************************************************/
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __BOARDS_ARM_STM32H7_WEACT_STM32H743_INCLUDE_BOARD_H */
|