incubator-nuttx

History

patacongo 61955434b1 Add strnlen() git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3054 42af7a65-404d-4744-a932-0658087f49c3		2010-10-27 20:54:11 +00:00
..
include	lpc2378 port contributed by Rommel Marcelo	2010-04-09 00:51:08 +00:00
nsh	Add strnlen()	2010-10-27 20:54:11 +00:00
ostest	Add strnlen()	2010-10-27 20:54:11 +00:00
src	Prep for 5.3 release	2010-04-11 19:44:36 +00:00
README.txt	lpc2378 port contributed by Rommel Marcelo	2010-04-09 00:51:08 +00:00

README.txt

There's not much here:

EXT1 - P3 0:7 are used for LEDs.

UEXT pin 3/4 -TXD2/RXD2- is UART2.

The board I have has the revision '-' of LPC2378 even though I got the board
more than 2 years after the chip revision was released :-( .
I can't get Nuttx to work if I fully enabled the MAM.

I used FTDI ft232 usb-serial with nsh piping as seen on the screenshot.