OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/net/udp/udp_sendto_unbuffered.c

522 lines
15 KiB
C
Raw Blame History

/****************************************************************************
* net/udp/udp_sendto_unbuffered.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifdef CONFIG_NET_UDP
#include <sys/types.h>
#include <stdint.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <assert.h>
#include <nuttx/semaphore.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/udp.h>
#include "netdev/netdev.h"
#include "devif/devif.h"
#include "arp/arp.h"
#include "icmpv6/icmpv6.h"
#include "socket/socket.h"
#include "udp/udp.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* If both IPv4 and IPv6 support are both enabled, then we will need to build
* in some additional domain selection support.
*/
#if defined(CONFIG_NET_IPv4) && defined(CONFIG_NET_IPv6)
# define NEED_IPDOMAIN_SUPPORT 1
#endif
/****************************************************************************
* Private Types
****************************************************************************/
struct sendto_s
{
#ifdef NEED_IPDOMAIN_SUPPORT
FAR struct socket *st_sock; /* Points to the parent socket structure */
#endif
FAR struct devif_callback_s *st_cb; /* Reference to callback instance */
FAR struct net_driver_s *st_dev; /* Driver that will perform the transmission */
sem_t st_sem; /* Semaphore signals sendto completion */
uint16_t st_buflen; /* Length of send buffer (error if <0) */
const char *st_buffer; /* Pointer to send buffer */
int st_sndlen; /* Result of the send (length sent or negated errno) */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: sendto_ipselect
*
* Description:
* If both IPv4 and IPv6 support are enabled, then we will need to select
* which one to use when generating the outgoing packet. If only one
* domain is selected, then the setup is already in place and we need do
* nothing.
*
* Input Parameters:
* dev - The structure of the network driver that caused the event
* pstate - sendto state structure
*
* Returned Value:
* None
*
* Assumptions:
* This function must be called with the network locked.
*
****************************************************************************/
#ifdef NEED_IPDOMAIN_SUPPORT
static inline void sendto_ipselect(FAR struct net_driver_s *dev,
FAR struct sendto_s *pstate)
{
FAR struct socket *psock = pstate->st_sock;
DEBUGASSERT(psock);
/* Which domain the socket support */
if (psock->s_domain == PF_INET)
{
/* Select the IPv4 domain */
udp_ipv4_select(dev);
}
else /* if (psock->s_domain == PF_INET6) */
{
/* Select the IPv6 domain */
DEBUGASSERT(psock->s_domain == PF_INET6);
udp_ipv6_select(dev);
}
}
#endif
/****************************************************************************
* Name: sendto_eventhandler
*
* Description:
* This function is called to perform the actual send operation when
* polled by the lower, device interfacing layer.
*
* Input Parameters:
* dev The structure of the network driver that caused the event
* conn An instance of the UDP connection structure cast to void *
* pvpriv An instance of struct sendto_s cast to void*
* flags Set of events describing why the callback was invoked
*
* Returned Value:
* Modified value of the input flags
*
* Assumptions:
* This function must be called with the network locked.
*
****************************************************************************/
static uint16_t sendto_eventhandler(FAR struct net_driver_s *dev,
FAR void *conn, FAR void *pvpriv,
uint16_t flags)
{
FAR struct sendto_s *pstate = (FAR struct sendto_s *)pvpriv;
DEBUGASSERT(pstate != NULL && pstate->st_dev != NULL);
if (pstate != NULL)
{
/* The TCP socket should be bound to a device. Make sure that the
* polling device is the one that we are bound to.
*/
if (dev != pstate->st_dev)
{
/* Ignore this poll. Wait for the right device */
return flags;
}
ninfo("flags: %04x\n", flags);
/* If the network device has gone down, then we will have terminate
* the wait now with an error.
*/
if ((flags & NETDEV_DOWN) != 0)
{
/* Terminate the transfer with an error. */
nwarn("WARNING: Network is down\n");
pstate->st_sndlen = -ENETUNREACH;
}
/* Check if the outgoing packet is available. It may have been claimed
* by a sendto event serving a different thread -OR- if the output
* buffer currently contains unprocessed incoming data. In these cases
* we will just have to wait for the next polling cycle.
*/
else if (dev->d_sndlen > 0 || (flags & UDP_NEWDATA) != 0)
{
/* Another thread has beat us sending data or the buffer is busy,
* wait for the next polling cycle and check again.
*/
return flags;
}
/* It looks like we are good to send the data */
else
{
#ifdef NEED_IPDOMAIN_SUPPORT
/* If both IPv4 and IPv6 support are enabled, then we will need to
* select which one to use when generating the outgoing packet.
* If only one domain is selected, then the setup is already in
* place and we need do nothing.
*/
sendto_ipselect(dev, pstate);
#endif
/* Copy the user data into d_appdata and send it */
devif_send(dev, pstate->st_buffer, pstate->st_buflen);
pstate->st_sndlen = pstate->st_buflen;
}
/* Don't allow any further call backs. */
pstate->st_cb->flags = 0;
pstate->st_cb->priv = NULL;
pstate->st_cb->event = NULL;
/* Wake up the waiting thread */
nxsem_post(&pstate->st_sem);
}
return flags;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: psock_udp_sendto
*
* Description:
* This function implements the UDP-specific logic of the standard
* sendto() socket operation.
*
* Input Parameters:
* psock A pointer to a NuttX-specific, internal socket structure
* buf Data to send
* len Length of data to send
* flags Send flags
* to Address of recipient
* tolen The length of the address structure
*
* NOTE: All input parameters were verified by sendto() before this
* function was called.
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* a negated errno value is returned. See the description in
* net/socket/sendto.c for the list of appropriate return value.
*
****************************************************************************/
ssize_t psock_udp_sendto(FAR struct socket *psock, FAR const void *buf,
size_t len, int flags,
FAR const struct sockaddr *to, socklen_t tolen)
{
FAR struct udp_conn_s *conn;
struct sendto_s state;
int ret;
/* If the UDP socket was previously assigned a remote peer address via
* connect(), then as with connection-mode socket, sendto() may not be
* used with a non-NULL destination address. Normally send() would be
* used with such connected UDP sockets.
*/
if (to != NULL && _SS_ISCONNECTED(psock->s_flags))
{
/* EISCONN - A destination address was specified and the socket is
* already connected.
*/
return -EISCONN;
}
/* Otherwise, if the socket is not connected, then a destination address
* must be provided.
*/
else if (to == NULL && !_SS_ISCONNECTED(psock->s_flags))
{
/* EDESTADDRREQ - The socket is not connection-mode and no peer\
* address is set.
*/
return -EDESTADDRREQ;
}
/* Get the underlying the UDP connection structure. */
conn = (FAR struct udp_conn_s *)psock->s_conn;
DEBUGASSERT(conn);
#if defined(CONFIG_NET_ARP_SEND) || defined(CONFIG_NET_ICMPv6_NEIGHBOR)
#ifdef CONFIG_NET_ARP_SEND
/* Assure the the IPv4 destination address maps to a valid MAC address in
* the ARP table.
*/
#ifdef CONFIG_NET_ICMPv6_NEIGHBOR
if (psock->s_domain == PF_INET)
#endif
{
in_addr_t destipaddr;
/* Check if the socket is connection mode */
if (_SS_ISCONNECTED(psock->s_flags))
{
/* Yes.. use the connected remote address (the 'to' address is
* null).
*/
destipaddr = conn->u.ipv4.raddr;
}
else
{
FAR const struct sockaddr_in *into;
/* No.. use the destination address provided by the non-NULL 'to'
* argument.
*/
into = (FAR const struct sockaddr_in *)to;
destipaddr = into->sin_addr.s_addr;
}
/* Make sure that the IP address mapping is in the ARP table */
ret = arp_send(destipaddr);
}
#endif /* CONFIG_NET_ARP_SEND */
#ifdef CONFIG_NET_ICMPv6_NEIGHBOR
/* Assure the the IPv6 destination address maps to a valid MAC address in
* the neighbor table.
*/
#ifdef CONFIG_NET_ARP_SEND
else
#endif
{
FAR const uint16_t *destipaddr;
/* Check if the socket is connection mode */
if (_SS_ISCONNECTED(psock->s_flags))
{
/* Yes.. use the connected remote address (the 'to' address is
* null).
*/
destipaddr = conn->u.ipv6.raddr;
}
else
{
FAR const struct sockaddr_in6 *into;
/* No.. use the destination address provided by the non-NULL 'to'
* argument.
*/
into = (FAR const struct sockaddr_in6 *)to;
destipaddr = into->sin6_addr.s6_addr16;
}
/* Make sure that the IP address mapping is in the Neighbor Table */
ret = icmpv6_neighbor(destipaddr);
}
#endif /* CONFIG_NET_ICMPv6_NEIGHBOR */
/* Did we successfully get the address mapping? */
if (ret < 0)
{
nerr("ERROR: Peer not reachable\n");
return -ENETUNREACH;
}
#endif /* CONFIG_NET_ARP_SEND || CONFIG_NET_ICMPv6_NEIGHBOR */
/* Initialize the state structure. This is done with the network
* locked because we don't want anything to happen until we are
* ready.
*/
net_lock();
memset(&state, 0, sizeof(struct sendto_s));
/* This semaphore is used for signaling and, hence, should not have
* priority inheritance enabled.
*/
nxsem_init(&state.st_sem, 0, 0);
nxsem_set_protocol(&state.st_sem, SEM_PRIO_NONE);
state.st_buflen = len;
state.st_buffer = buf;
#ifdef NEED_IPDOMAIN_SUPPORT
/* Save the reference to the socket structure if it will be needed for
* asynchronous processing.
*/
state.st_sock = psock;
#endif
/* Check if the socket is connected */
if (!_SS_ISCONNECTED(psock->s_flags))
{
/* No.. Call udp_connect() to set the remote address in the connection
* structure to the sendto() destination address.
*/
ret = udp_connect(conn, to);
if (ret < 0)
{
nerr("ERROR: udp_connect failed: %d\n", ret);
goto errout_with_lock;
}
}
/* Get the device that will handle the remote packet transfers. This
* should never be NULL.
*/
state.st_dev = udp_find_raddr_device(conn);
if (state.st_dev == NULL)
{
nerr("ERROR: udp_find_raddr_device failed\n");
ret = -ENETUNREACH;
goto errout_with_lock;
}
/* Make sure that the device is in the UP state */
if ((state.st_dev->d_flags & IFF_UP) == 0)
{
nwarn("WARNING: device is DOWN\n");
ret = -EHOSTUNREACH;
goto errout_with_lock;
}
/* Set up the callback in the connection */
ret = -ENOMEM; /* Assume allocation failure */
state.st_cb = udp_callback_alloc(state.st_dev, conn);
if (state.st_cb)
{
state.st_cb->flags = (UDP_POLL | NETDEV_DOWN);
state.st_cb->priv = (FAR void *)&state;
state.st_cb->event = sendto_eventhandler;
/* Notify the device driver of the availability of TX data */
netdev_txnotify_dev(state.st_dev);
/* Wait for either the receive to complete or for an error/timeout to
* occur. NOTES: net_timedwait will also terminate if a signal
* is received.
*/
ret = net_timedwait(&state.st_sem, _SO_TIMEOUT(psock->s_sndtimeo));
if (ret >= 0)
{
/* The result of the sendto operation is the number of bytes
* transferred.
*/
ret = state.st_sndlen;
}
/* Make sure that no further events are processed */
udp_callback_free(state.st_dev, conn, state.st_cb);
}
errout_with_lock:
/* Release the semaphore */
nxsem_destroy(&state.st_sem);
/* Unlock the network and return the result of the sendto() operation */
net_unlock();
return ret;
}
/****************************************************************************
* Name: psock_udp_cansend
*
* Description:
* psock_udp_cansend() returns a value indicating if a write to the socket
* would block. It is still possible that the write may block if another
* write occurs first.
*
* Input Parameters:
* psock An instance of the internal socket structure.
*
* Returned Value:
* OK (Always can send).
*
* Assumptions:
* None
*
****************************************************************************/
int psock_udp_cansend(FAR struct socket *psock)
{
return OK;
}
#endif /* CONFIG_NET_UDP */
Reference in New Issue View Git Blame Copy Permalink