224 lines
5.9 KiB
ReStructuredText
224 lines
5.9 KiB
ReStructuredText
==================
|
||
Bouffalo Lab BL602
|
||
==================
|
||
|
||
BL602/BL604 is Wi-Fi + BLE combo chipset for ultra-low-cost and
|
||
low-power application. Wireless subsystem contains 2.4G radio, Wi-Fi
|
||
802.11b/g/n and BLE 5.0 baseband/MAC designs. Microcontroller subsystem
|
||
contains a low-power 32-bit RISC CPU, high-speed cache and memories.
|
||
Power Management Unit controls low-power modes. Moreover, variety of
|
||
security features are supported.
|
||
|
||
- 32-bit RISC CPU with FPU (floating point unit)
|
||
|
||
- 276KB RAM
|
||
|
||
- 128KB ROM
|
||
|
||
- 1Kb eFuse
|
||
|
||
- Embedded Flash (Optional)
|
||
|
||
- Four DMA channels
|
||
|
||
BL602 Toolchain
|
||
===============
|
||
|
||
Toolchain can be obtained from
|
||
`bl_iot_sdk/toolchain/riscv <https://github.com/bouffalolab/bl_iot_sdk/tree/master/toolchain/riscv/Linux>`__
|
||
|
||
In addition, SiFive’s toolchain can be downloaded from:
|
||
|
||
https://static.dev.sifive.com/dev-tools/riscv64-unknown-elf-gcc-8.3.0-2019.08.0-x86_64-linux-ubuntu14.tar.gz
|
||
|
||
Building
|
||
========
|
||
|
||
nsh
|
||
---
|
||
|
||
First make sure the ``riscv-gnu-toolchain`` has been installed
|
||
correctly.
|
||
|
||
Configure the NuttX project: ``./tools/configure.sh bl602evb:nsh``. Run
|
||
``make`` to build the project.
|
||
|
||
.. code:: shell
|
||
|
||
root@pc:~/nuttx$ tools/configure.sh bl602evb:nsh
|
||
|
||
root@pc:~/nuttx$ make
|
||
|
||
wifi
|
||
----
|
||
|
||
Configure the NuttX project: ``./tools/configure.sh bl602evb:wifi``. Run
|
||
``make`` to build the project.
|
||
|
||
.. code:: shell
|
||
|
||
root@pc:~/nuttx$ tools/configure.sh bl602evb:wifi
|
||
|
||
root@pc:~/nuttx$ make
|
||
|
||
Flashing
|
||
========
|
||
|
||
Dev Cube is a chip integrated development tool provided by Bouffalolab,
|
||
which includes three functions: IOT program download, MCU program
|
||
download and RF performance test.
|
||
|
||
Dev Cube provides users with the function of downloading programs, and
|
||
supports the configuration of parameters such as clock and flash. Users
|
||
can decide whether to encrypt the program, add signatures, and replace
|
||
the information file, user resource file, partition table and other
|
||
functional configurations according to their own needs when the program
|
||
is started.
|
||
|
||
Users can get the latest version of Dev Cube through `Bouffalo Lab
|
||
Dev <https://dev.bouffalolab.com/download>`__.
|
||
|
||
Config download
|
||
---------------
|
||
|
||
**Configuration parameters include:**
|
||
|
||
- **Interface**: Select the communication interface for flashing, here
|
||
select Uart to download
|
||
|
||
- **COM Port**: When select UART for downloading, select the COM port
|
||
number connected to the chip, and you can click the Refresh button to
|
||
refresh the COM port
|
||
|
||
- **Uart Rate**: When select UART for downloading, fill in the baud
|
||
rate. The recommended download baud rate is 2MHz,
|
||
|
||
- **Xtal**: Select the crystal oscillator frequency when downloading.
|
||
If the board does not have a soldered crystal oscillator, the
|
||
internal RC32M clock source should be selected here,default is 40M
|
||
|
||
- **Chip Erase**: default setting is False
|
||
|
||
**Configuration parameters include:**
|
||
|
||
- **Factory Params**: Use the dts file in the device_tree folder of the
|
||
corresponding chip model in the Dev Cube directory. The default
|
||
selection is 40M.
|
||
|
||
- **Partition Table**: Use the partition table in the partition folder
|
||
of the corresponding chip model in the Dev Cube directory, and 2M
|
||
files are selected by default for BL602
|
||
|
||
**For the nuttx, BL602 has a dedicated partition file. It is placed
|
||
in** ``nuttx/tools/bl602``
|
||
|
||
- **Boot2 Bin**: It is the first Flash program that runs after the
|
||
system is started. It is responsible for establishing the BLSP
|
||
security environment and guiding the main program to run. It uses the
|
||
Boot2 file in the builtin_imgs folder of the corresponding chip model
|
||
in the Dev Cube directory.
|
||
|
||
- **Firmware Bin**: Bin file path generated by user compilation
|
||
|
||
- **Media/Romfs**: Choose one of Media and Romfs. If you check media,
|
||
you should provide a file. If you check Romfs, a folder should be
|
||
provided.
|
||
|
||
- **MFG Bin**: Select MFG file
|
||
|
||
- **AES-Encrypt**: If you use the encryption function, you need to
|
||
select the AES-Encrypt option, and enter the Key and IV used for
|
||
encryption. Hexadecimal characters should be entered, and a Byte is
|
||
composed of two characters, so the Key and IV require 32 characters
|
||
to be input respectively. It should be noted that the last 8
|
||
characters of the IV (ie 4Bytes) must be all 0
|
||
|
||
- **Single Download Config**: you can download a single file. Fill in
|
||
the starting address of the download, starting with 0x
|
||
|
||
For details, please refer to `BLFlashEnv — BL602 IoT
|
||
SDK <https://bouffalolab.github.io/bl_iot_sdk/Developer_Environment/BLFlashEnv/BLFlashEnv.html#iot>`__
|
||
|
||
Debugging with OpenOCD
|
||
======================
|
||
|
||
Download OpenOCD `RISC‑V
|
||
OpenOCD <https://static.dev.sifive.com/dev-tools/freedom-tools/v2020.12/riscv-openocd-0.10.0-2020.12.1-x86_64-linux-ubuntu14.tar.gz>`__.
|
||
|
||
Start OpenOCD:
|
||
|
||
.. code:: shell
|
||
|
||
root@pc:~$ openocd -f ~/bl_iot_sdk/tools/debug/if_bflb_link.cfg -f ~/bl_iot_sdk/tools/debug/tgt_602_xip.cfg
|
||
|
||
Start GDB:
|
||
|
||
.. code:: shell
|
||
|
||
root@pc:~$ riscv64-unknown-elf-gdb ~/nuttx/nuttx -x ~/bl_iot_sdk/tools/debug/602.init
|
||
|
||
Connect OpenOCD:
|
||
|
||
.. code:: shell
|
||
|
||
(gdb) target remote :3333
|
||
|
||
(gdb) c
|
||
|
||
BL602 Peripheral Support
|
||
========================
|
||
|
||
- One SDIO 2.0 slave
|
||
|
||
- One SPI master/slave
|
||
|
||
- Two UART
|
||
|
||
- One I2C master
|
||
|
||
- Five PWM channels
|
||
|
||
- 10-bit general DAC
|
||
|
||
- 12-bit general ADC
|
||
|
||
- Two general analog comparators (ACOMP)
|
||
|
||
- PIR (Passive Infra-Red) detection
|
||
|
||
- IR remote HW accelerator
|
||
|
||
- 16 or 23 GPIOs
|
||
|
||
========== ======= =====
|
||
Peripheral Support NOTES
|
||
========== ======= =====
|
||
GPIO Yes
|
||
UART Yes
|
||
SPI Yes
|
||
I2C Yes
|
||
DMA Yes
|
||
Wifi Yes
|
||
SPI FLASH Yes
|
||
Timers Yes
|
||
Watchdog Yes
|
||
RTC Yes
|
||
RNG No
|
||
AES No
|
||
eFuse Yes
|
||
ADC No
|
||
Bluetooth No
|
||
LED_PWM No
|
||
SHA No
|
||
RSA No
|
||
========== ======= =====
|
||
|
||
Supported Boards
|
||
================
|
||
|
||
.. toctree::
|
||
:glob:
|
||
:maxdepth: 1
|
||
|
||
boards/*/*
|