Gregory Nutt 2fd334432c Networking: Fix to ICMPv6 logic: Needs to set source and destination address in the Ethernet header		2015-01-19 14:57:55 -06:00
..
analog	…
audio	…
binfmt	Oops.. part of the last change will still in the editor	2014-11-12 18:33:07 -06:00
crypto	…
eeprom	Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet	2014-12-05 09:13:34 -06:00
fs	Fixes warning about block_operations not being defined. From David Sidrane.	2014-12-30 06:19:30 -06:00
input	Update the ADXL345 interface following the current interface scheme	2014-12-16 11:45:28 -06:00
lcd	ili9341: update interface control definitions	2014-12-19 13:52:40 -06:00
mm	…
mtd	Added forward reference to eliminate warnings. From David Sidrane.	2014-12-30 06:20:40 -06:00
net	Networking: Fix to ICMPv6 logic: Needs to set source and destination address in the Ethernet header	2015-01-19 14:57:55 -06:00
nx	Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville	2014-12-10 17:11:23 -06:00
power	…
sensors	Update ChangeLog	2015-01-06 10:52:05 -06:00
sercomm	…
serial	STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane	2014-12-27 18:58:18 -06:00
spi	Add ADXL345 accelerometer driver. From Alan Carvalho de Assis	2014-12-16 08:16:53 -06:00
syslog	…
usb	USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts	2015-01-11 08:05:09 -06:00
video	STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review	2014-12-19 14:52:17 -06:00
wireless	Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis	2014-12-18 13:52:01 -06:00
.gitignore	…
addrenv.h	…
arch.h	…
ascii.h	…
can.h	…
clock.h	…
compiler.h	Defines inline functions as not instrumented - this is relevant for anyone using instrumentation. From Lorenz Meier.	2014-11-12 07:32:36 -06:00
configdata.h	…
float.h	…
i2c.h	…
init.h	…
irq.h	…
kmalloc.h	…
kthread.h	…
lib.h	…
math.h	…
mmcsd.h	…
mqueue.h	…
page.h	…
pgalloc.h	…
poff.h	…
progmem.h	…
pthread.h	…
pwm.h	…
regex.h	…
rtc.h	…
rwbuffer.h	…
sched.h	strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8.	2014-12-17 12:24:02 -06:00
scsi.h	…
sdio.h	STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y	2015-01-08 18:12:06 -06:00
semaphore.h	…
spawn.h	…
stdarg.h	…
streams.h	…
time.h	…
timer.h	…
tree.h	…
userspace.h	…
vt100.h	…
watchdog.h	…
wdog.h	…
wqueue.h	Fix warning caused by missing comment closing */. From David Sidrane.	2014-12-30 06:22:18 -06:00