incubator-nuttx

History

Xiang Xiao b329e2377d boards: Move toolchain related variables to Toolchain.defs 1.It make sense to let Toolchain.defs give the default value 2.The board can still change if the default isn't suitable 3.Avoid the same definition spread more than 200 Make.defs Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64		2020-07-20 17:10:37 +01:00
..
configs/nsh	boards: hifive1-revb: Increase UART0 RXBUFSIZE from 8 to 16	2020-07-16 01:27:46 -05:00
include	Remove exra whitespace from files (#189 )	2020-01-31 09:24:49 -06:00
scripts	boards: Move toolchain related variables to Toolchain.defs	2020-07-20 17:10:37 +01:00
src	Fix nxstyle issue	2020-06-07 19:28:10 +01:00
Kconfig	…
README-qemu.txt	Merged in masayuki2009/nuttx.nuttx/fe310_with_pll (pull request #1094 )	2019-12-11 12:01:53 +00:00
README.txt	Merged in masayuki2009/nuttx.nuttx/fe310_with_pll (pull request #1094 )	2019-12-11 12:01:53 +00:00

README.txt

1. Download and install toolchain

  $ curl https://static.dev.sifive.com/dev-tools/riscv64-unknown-elf-gcc-8.3.0-2019.08.0-x86_64-linux-ubuntu14.tar.gz

2. Download and install J-Link Software Documentation Pack

  https://www.segger.com/downloads/jlink/

  $ sudo apt install JLink_Linux_V656b_x86_64.deb

3. Configure and build NuttX

  $ mkdir ./nuttx; cd ./nuttx
  $ git clone https://bitbucket.org/nuttx/nuttx.git
  $ git clone https://bitbucket.org/nuttx/apps.git
  $ cd nuttx
  $ make distclean
  $ ./tools/configure.sh hifive1-revb:nsh
  $ make V=1

4. Flash the nuttx with J-Link and run

  $ picocom -b 115200 /dev/ttyACM0

  $ /opt/SEGGER/JLink_V656b/JLinkGDBServer -device FE310

  $ riscv64-unknown-elf-gdb ./nuttx
  (gdb) target extended-remote:2331
  (gdb) load nuttx
  (gdb) c

5. TODO

  Support GPIO/SPI/I2C/RTC/WDT/PWM
  Support RISC-V User mode