Gregory Nutt b0dffdc2ca Fix a number of header files with mismatched 'extern C {' and '}'		2016-11-05 07:25:05 -06:00
..
analog	Make DAC structure packed	2016-09-20 08:04:32 -06:00
audio	drivers/audio: Add Audio Tone Generator for NuttX	2016-08-16 13:20:05 -06:00
binfmt	Fix a number of header files with mismatched 'extern C {' and '}'	2016-11-05 07:25:05 -06:00
contactless	Fix some comments in header files	2016-08-31 13:34:52 -06:00
crypto	Modifications to the crypto API needed for LPC43xx.	2016-05-23 08:05:02 -06:00
drivers	Change the way that contactless IOCTL commands are defined. All IOCTL commands must be unique.	2016-08-31 11:30:22 -06:00
eeprom	Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet	2014-12-05 09:13:34 -06:00
fs	include/nuttx/fs/nxffs.h: Needs forward reference to struct mtd_dev_s and needs to include stdbool.h	2016-10-09 14:07:19 -06:00
i2c	Changes from review of PR 114	2016-08-14 13:38:47 -06:00
input	Correct typo in comments	2016-10-11 14:13:28 -06:00
ioexpander	Fix names of pre-processor variables used in header file idempotence	2016-08-06 19:21:42 -06:00
lcd	correct logic hazard in latch and load nybble; was transitioning control lines at the same time as enable, causing spurious behaviour on less-tolerant displays	2016-05-29 11:09:00 -05:00
leds	pwm.h moved from include/nuttx/ to include/nuttx/drivers.	2016-07-20 13:48:24 -06:00
lib	Make xorshift128 re-entrant so that we do do have to suffer the overhad of serialization controls.	2016-08-21 07:47:53 -06:00
mm	Add _ to the beginning of all debug macros to avoid name collisions	2016-06-16 12:33:32 -06:00
modem	include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique	2016-09-16 09:39:51 -06:00
mtd	MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F.	2016-09-02 11:00:04 -06:00
net	Kinetis Ethernet: Add support for the KSZ8081 PHY	2016-07-12 09:59:08 -06:00
nx	NX: Add configurable callout to external logic to handle display update events	2016-04-17 11:57:43 -06:00
power	Fix names of pre-processor variables used in header file idempotence	2016-08-06 19:21:42 -06:00
sensors	drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project.	2016-09-16 12:45:53 -06:00
sercomm	Fix names of pre-processor variables used in header file idempotence	2016-08-06 19:21:42 -06:00
serial	PTY: Add TERMIOS support.	2016-07-16 10:43:44 -06:00
spi	contactless: spi device	2016-08-31 13:22:10 +02:00
syslog	Add a SYSLOG character device that can be used to re-direct output to the SYSLOG	2016-07-05 12:58:18 -06:00
timers	oneshot interface: max_delay method should return time in a standard struct timespec form.	2016-08-12 11:33:10 -06:00
usb	Fix C99 style comment	2016-08-26 08:28:54 -06:00
video	Fix names of pre-processor variables used in header file idempotence	2016-08-06 19:21:42 -06:00
wireless	Move contactless drivers to their own directory	2016-08-31 13:08:58 +02:00
.gitignore	…
addrenv.h	…
arch.h	Fix a number of header files with mismatched 'extern C {' and '}'	2016-11-05 07:25:05 -06:00
ascii.h	ASCII: Improve some naming	2016-04-14 16:20:36 -06:00
board.h	Add an argument to board_app_initialize()	2016-05-24 10:51:22 -06:00
clock.h	sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured.	2016-08-20 12:47:07 -06:00
compiler.h	Update compiler.h to support IAR compiler	2016-04-02 06:24:36 -06:00
init.h	enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized	2016-05-18 09:17:01 -06:00
irq.h	Scheduler instrumentation: Fix some associated with monitoring critical sections	2016-03-21 17:08:07 -06:00
kmalloc.h	Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking	2016-02-16 19:33:22 -06:00
kthread.h	…
mmcsd.h	Remove the final vestiges of up_spiinitialize()	2016-01-27 09:27:56 -06:00
module.h	Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier	2015-12-13 08:10:01 -06:00
mqueue.h	Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov.	2016-04-11 11:14:18 -06:00
page.h	…
pgalloc.h	…
poff.h	Fix names of pre-processor variables used in header file idempotence	2016-08-06 19:21:42 -06:00
progmem.h	drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h	2015-11-12 13:40:18 -06:00
pthread.h	Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np().	2016-02-19 17:33:35 -06:00
sched.h	sched/pthread and task: When a pthread is started, there is a small bit of logic that will run on the thread of execution of the new pthread. In the case where the new pthread has a lower priority than the parent thread, then this could cause both the parent thread and the new pthread to be blocked at the priority of the lower priority pthread (assuming that CONFIG_PRIORITY_INHERITANCE is not selected).	2016-10-01 11:38:22 -06:00
sched_note.h	Add task state to information recorded when a task is suspended	2016-03-21 15:24:15 -06:00
scsi.h	Clean up and review of header files for conformance to standards	2015-06-12 19:26:01 -06:00
sdio.h	Clean up and review of header files for conformance to standards	2015-06-12 19:26:01 -06:00
semaphore.h	include/nuttx/semaphore.h: Fix broken macros	2016-11-03 12:49:44 -06:00
signal.h	signals: Adds a very limited, minimal implementation for SIGEV_THREAD	2015-12-30 15:01:14 -06:00
spawn.h	…
spinlock.h	More of the same cloned typo	2016-10-19 10:11:45 -06:00
streams.h	Fix names of pre-processor variables used in header file idempotence	2016-08-06 19:21:42 -06:00
symtab.h	Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier	2015-12-13 08:10:01 -06:00
time.h	Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.	2015-04-08 06:56:43 -06:00
tls.h	TLS: Simplify	2016-03-11 07:17:32 -06:00
tree.h	…
userspace.h	Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.	2015-07-10 08:37:02 -06:00
vt100.h	Add ANSI/VT100 color codes	2014-11-10 15:10:57 -06:00
wdog.h	The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR).	2016-01-05 07:58:04 -06:00
wqueue.h	Update to use 64-bit timer when available	2016-01-21 11:54:26 -06:00
zoneinfo.h	Move the TZ/Olson zoneinfo data set from apps/system/zoneinfo to libc/zoneinfo	2016-06-30 15:40:37 -06:00