606 lines
34 KiB
C
606 lines
34 KiB
C
/************************************************************************************
|
|
* arch/arm/include/stm32f0l0g0/chip.h
|
|
*
|
|
* Copyright (C) 2017-2018 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
* Alan Carvalho de Assis <acassis@gmail.com>
|
|
* Daniel Pereira Volpato <dpo@certi.org.br>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __ARCH_ARM_INCLUDE_STM32F0L0G0_CHIP_H
|
|
#define __ARCH_ARM_INCLUDE_STM32F0L0G0_CHIP_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Get customizations for each supported chip */
|
|
|
|
#if defined(CONFIG_ARCH_CHIP_STM32F030RC) || defined(CONFIG_ARCH_CHIP_STM32F030CC)
|
|
|
|
# define STM32_FLASH_SIZE (256*1024) /* 256Kb */
|
|
# define STM32_SRAM_SIZE (32*1024) /* 32Kb */
|
|
|
|
# define STM32_NSPI 2 /* Two SPI modules (SPI or I2S) */
|
|
# define STM32_NI2S 0 /* No I2S modules */
|
|
# define STM32_NI2C 2 /* Two I2C modules */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 6 /* Six USARTs modules */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NUSBDEV 0 /* One USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 0 /* One DAC channel */
|
|
# define STM32_NCOMP 0 /* Two Analog Comparators */
|
|
# define STM32_NCAP 0 /* Capacitive sensing channels (14 on UFQFPN32)) */
|
|
# define STM32_NPORTS 5 /* Six GPIO ports, GPIOA-F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32F051R8)
|
|
|
|
# define STM32_FLASH_SIZE (64*1024) /* 64Kb */
|
|
# define STM32_SRAM_SIZE (8*1024) /* 8Kb */
|
|
|
|
# define STM32_NSPI 2 /* Two SPI modules (SPI or I2S) */
|
|
# define STM32_NI2S 2 /* Two I2S modules (SPI or I2S) */
|
|
# define STM32_NI2C 2 /* Two I2C modules */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 2 /* Two USARTs modules */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NUSBDEV 1 /* One USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 1 /* One DAC channel */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCAP 13 /* Capacitive sensing channels (14 on UFQFPN32)) */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32F072C8) || defined(CONFIG_ARCH_CHIP_STM32F072CB)
|
|
|
|
# ifdef CONFIG_ARCH_CHIP_STM32F072C8
|
|
# define STM32_FLASH_SIZE (64*1024) /* 64Kb */
|
|
# else
|
|
# define STM32_FLASH_SIZE (128*1024) /* 128Kb */
|
|
# endif
|
|
# define STM32_SRAM_SIZE (16*1024) /* 16Kb */
|
|
|
|
# define STM32_NATIM 1 /* One advanced timer TIM1 */
|
|
# define STM32_NGTIM16 5 /* 16-bit general up/down timers TIM3, TIM14-17 */
|
|
# define STM32_NGTIM32 1 /* 32-bit general up/down timers TIM2 */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 */
|
|
# define STM32_NSPI 2 /* Two SPI modules (SPI or I2S) */
|
|
# define STM32_NI2S 2 /* Two I2S modules (SPI or I2S) */
|
|
# define STM32_NI2C 2 /* Two I2C modules */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USARTs module */
|
|
# define STM32_NCAN 1 /* One CAN controller */
|
|
# define STM32_NUSBDEV 1 /* One USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 1 /* One HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channel */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCAP 17 /* Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32F072R8) || defined(CONFIG_ARCH_CHIP_STM32F072RB)
|
|
|
|
# ifdef CONFIG_ARCH_CHIP_STM32F072R8
|
|
# define STM32_FLASH_SIZE (64*1024) /* 64Kb */
|
|
# else
|
|
# define STM32_FLASH_SIZE (128*1024) /* 128Kb */
|
|
# endif
|
|
# define STM32_SRAM_SIZE (16*1024) /* 16Kb */
|
|
|
|
# define STM32_NATIM 1 /* One advanced timer TIM1 */
|
|
# define STM32_NGTIM16 5 /* 16-bit general up/down timers TIM3, TIM14-17 */
|
|
# define STM32_NGTIM32 1 /* 32-bit general up/down timers TIM2 */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 */
|
|
# define STM32_NSPI 2 /* Two SPI modules (SPI or I2S) */
|
|
# define STM32_NI2S 2 /* Two I2S modules (SPI or I2S) */
|
|
# define STM32_NI2C 2 /* Two I2C modules */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USARTs module */
|
|
# define STM32_NCAN 1 /* One CAN controller */
|
|
# define STM32_NUSBDEV 1 /* One USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 1 /* One HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channel */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCAP 18 /* Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32F072V8) || defined(CONFIG_ARCH_CHIP_STM32F072VB)
|
|
|
|
# ifdef CONFIG_ARCH_CHIP_STM32F072V8
|
|
# define STM32_FLASH_SIZE (64*1024) /* 64Kb */
|
|
# else
|
|
# define STM32_FLASH_SIZE (128*1024) /* 128Kb */
|
|
# endif
|
|
# define STM32_SRAM_SIZE (16*1024) /* 16Kb */
|
|
|
|
# define STM32_NATIM 1 /* One advanced timer TIM1 */
|
|
# define STM32_NGTIM16 5 /* 16-bit general up/down timers TIM3, TIM14-17 */
|
|
# define STM32_NGTIM32 1 /* 32-bit general up/down timers TIM2 */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 */
|
|
# define STM32_NSPI 2 /* Two SPI modules (SPI or I2S) */
|
|
# define STM32_NI2S 2 /* Two I2S modules (SPI or I2S) */
|
|
# define STM32_NI2C 2 /* Two I2C modules */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USARTs module */
|
|
# define STM32_NCAN 1 /* One CAN controller */
|
|
# define STM32_NUSBDEV 1 /* One USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 1 /* One HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channel */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCAP 24 /* Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32F091CB) || defined(CONFIG_ARCH_CHIP_STM32F091CC)
|
|
|
|
# ifdef CONFIG_ARCH_CHIP_STM32F091CB
|
|
# define STM32_FLASH_SIZE (128*1024) /* 128Kb */
|
|
# else
|
|
# define STM32_FLASH_SIZE (256*1024) /* 256Kb */
|
|
# endif
|
|
# define STM32_SRAM_SIZE (32*1024) /* 32Kb */
|
|
|
|
# define STM32_NATIM 1 /* One advanced timer TIM1 */
|
|
# define STM32_NGTIM16 5 /* 16-bit general up/down timers TIM3, TIM14-17 */
|
|
# define STM32_NGTIM32 1 /* 32-bit general up/down timers TIM2 */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 */
|
|
# define STM32_NSPI 2 /* Two SPI modules (SPI or I2S) */
|
|
# define STM32_NI2S 2 /* Two I2S modules (SPI or I2S) */
|
|
# define STM32_NI2C 2 /* Two I2C modules */
|
|
# define STM32_NDMA 2 /* DMA1, DMA2 */
|
|
# define STM32_NUSART 6 /* Six USARTs modules */
|
|
# define STM32_NCAN 1 /* One CAN controller */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 1 /* One HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channel */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCAP 17 /* Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32F091RB) || defined(CONFIG_ARCH_CHIP_STM32F091RC) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32F091VB) || defined(CONFIG_ARCH_CHIP_STM32F091VC)
|
|
|
|
# if defined(CONFIG_ARCH_CHIP_STM32F091RB) || defined(CONFIG_ARCH_CHIP_STM32F091VB)
|
|
# define STM32_FLASH_SIZE (128*1024) /* 128Kb */
|
|
# else
|
|
# define STM32_FLASH_SIZE (256*1024) /* 256Kb */
|
|
# endif
|
|
# define STM32_SRAM_SIZE (32*1024) /* 32Kb */
|
|
|
|
# define STM32_NATIM 1 /* One advanced timer TIM1 */
|
|
# define STM32_NGTIM16 5 /* 16-bit general up/down timers TIM3, TIM14-17 */
|
|
# define STM32_NGTIM32 1 /* 32-bit general up/down timers TIM2 */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 */
|
|
# define STM32_NSPI 2 /* Two SPI modules (SPI or I2S) */
|
|
# define STM32_NI2S 2 /* Two I2S modules (SPI or I2S) */
|
|
# define STM32_NI2C 2 /* Two I2C modules */
|
|
# define STM32_NDMA 2 /* DMA1, DMA2 */
|
|
# define STM32_NUSART 8 /* Eight USARTs modules */
|
|
# define STM32_NCAN 1 /* One CAN controller */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 1 /* One HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channel */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# if defined(CONFIG_ARCH_CHIP_STM32F091VB) || defined(CONFIG_ARCH_CHIP_STM32F091VC)
|
|
# define STM32_NCAP 24 /* Capacitive sensing channels */
|
|
# else
|
|
# define STM32_NCAP 18 /* Capacitive sensing channels */
|
|
# endif
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32G070KB) || defined(CONFIG_ARCH_CHIP_STM32G070CB) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32G070RB)
|
|
|
|
# define STM32_FLASH_SIZE (128*1024) /* 128Kb */
|
|
# define STM32_SRAM_SIZE (32*1024) /* 32Kb */
|
|
|
|
# define STM32_NATIM 1 /* One advanced timer TIM1 */
|
|
# define STM32_NGTIM16 5 /* 16-bit general up/down timers TIM3,
|
|
* TIM14-17 */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* One I2S module (SPI or I2S) */
|
|
# define STM32_NI2C 2 /* Two I2C (1 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 0 /* No LCD */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG */
|
|
# define STM32_NCEC 0 /* One HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* (1) ADC1, 16-channels */
|
|
|
|
# define STM32_NDAC 0 /* No DAC */
|
|
# define STM32_NCOMP 0 /* No Analog Comparators */
|
|
# define STM32_NCRC 1 /* No CRC module */
|
|
# define STM32_NRNG 0 /* No Random number generator (RNG) */
|
|
# define STM32_NCAP 0 /* No Capacitive sensing channels */
|
|
# define STM32_NPORTS 5 /* Five GPIO ports, GPIOA-D, F */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32G071EB) || defined(CONFIG_ARCH_CHIP_STM32G071G8) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32G071GB) || defined(CONFIG_ARCH_CHIP_STM32G071G8XN) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32G071GBXN) || defined(CONFIG_ARCH_CHIP_STM32G071K8) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32G071KB) || defined(CONFIG_ARCH_CHIP_STM32G071K8XN) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32G071KBXN) || defined(CONFIG_ARCH_CHIP_STM32G071C8) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32G071CB) || defined(CONFIG_ARCH_CHIP_STM32G071R8) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32G071RB)
|
|
|
|
# define STM32_NATIM 1 /* One advanced timer TIM1 */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* Two LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2C 2 /* Two I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 0 /* No LCD */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* No USB OTG */
|
|
# define STM32_NCEC 1 /* One HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* (1) ADC1, 12-channels */
|
|
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 0 /* No CRC module */
|
|
# define STM32_NRNG 0 /* No Random number generator (RNG) */
|
|
# define STM32_NCAP 0 /* No Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
/* STM32L EnergyLite Line ***********************************************************/
|
|
|
|
/* STM32L073XX - With LCD
|
|
* STM32L072XX - No LCD
|
|
* STM32L071XX - Access line, no LCD
|
|
*
|
|
* STM32L0XXX8 - 64KB FLASH, 20KB SRAM, 3KB EEPROM
|
|
* STM32L0XXXB - 128KB FLASH, 20KB SRAM, 6KB EEPROM
|
|
* STM32L0XXXZ - 192KB FLASH, 20KB SRAM, 3KB EEPROM
|
|
*
|
|
* STM32L0XXCX - 48-pins
|
|
* STM32L0XXRX - 64-pins
|
|
* STM32L0XXVX - 100-pins
|
|
*/
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L071K8)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 with DMA */
|
|
/* 1 LPTIMER */
|
|
# define STM32_NSPI 1 /* 1 SPI modules SPI1 */
|
|
# define STM32_NI2S 0 /* 0 I2S module */
|
|
# define STM32_NI2C 2 /* 2 I2C */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 3 /* 3 USART modules, USART1-3 */
|
|
/* 1 LPUART */
|
|
# define STM32_NCAN 0 /* 0 CAN controllers */
|
|
# define STM32_NLCD 0 /* 0 LCD */
|
|
# define STM32_NUSBDEV 0 /* 0 USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* 0 USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* 0 HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 0 /* 0 DAC channel */
|
|
# define STM32_NCOMP 2 /* 2 Analog Comparators */
|
|
# define STM32_NCRC 0 /* 0 CRC module */
|
|
# define STM32_NRNG 0 /* 0 Random number generator (RNG) */
|
|
# define STM32_NCAP 0 /* 0 Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L071C8) || defined(CONFIG_ARCH_CHIP_STM32L071V8) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32L071CB) || defined(CONFIG_ARCH_CHIP_STM32L071VB) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32L071RB) || defined(CONFIG_ARCH_CHIP_STM32L071CZ) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32L071VZ) || defined(CONFIG_ARCH_CHIP_STM32L071RZ)
|
|
# define STM32_NATIM 0 /* 0 advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* 0 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 with DMA */
|
|
/* 1 LPTIMER */
|
|
# define STM32_NSPI 2 /* 2 SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* 1 I2S module */
|
|
# define STM32_NI2C 3 /* 3 I2C */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* 4 USART modules, USART1-4 */
|
|
/* 1 LPUART */
|
|
# define STM32_NCAN 0 /* 0 CAN controllers */
|
|
# define STM32_NLCD 0 /* 0 LCD */
|
|
# define STM32_NUSBDEV 0 /* 0 USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* 0 USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* 0 HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 0 /* 0 DAC channel */
|
|
# define STM32_NCOMP 2 /* 2 Analog Comparators */
|
|
# define STM32_NCRC 0 /* 0 CRC module */
|
|
# define STM32_NRNG 0 /* 0 Random number generator (RNG) */
|
|
# define STM32_NCAP 0 /* 0 Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L071KB) || defined(CONFIG_ARCH_CHIP_STM32L071KZ)
|
|
# define STM32_NATIM 0 /* 0 advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* 0 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* 2 basic timers: TIM6, TIM7 with DMA */
|
|
/* 1 LPTIMER */
|
|
# define STM32_NSPI 1 /* 1 SPI modules SPI1 */
|
|
# define STM32_NI2S 0 /* 0 I2S module */
|
|
# define STM32_NI2C 3 /* 3 I2C */
|
|
# define STM32_NDMA 1 /* 1 DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* 4 USART modules, USART1-4 */
|
|
/* 1 LPUART */
|
|
# define STM32_NCAN 0 /* 0 CAN controllers */
|
|
# define STM32_NLCD 0 /* 0 LCD */
|
|
# define STM32_NUSBDEV 0 /* 0 USB full-speed device controller */
|
|
# define STM32_NUSBOTG 0 /* 0 USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* 0 HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 0 /* 0 DAC channel */
|
|
# define STM32_NCOMP 2 /* 2 Analog Comparators */
|
|
# define STM32_NCRC 0 /* 0 CRC module */
|
|
# define STM32_NRNG 0 /* 0 Random number generator (RNG) */
|
|
# define STM32_NCAP 0 /* 0 Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L072V8) || defined(CONFIG_ARCH_CHIP_STM32L072VB) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32L072VZ)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* One LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* One I2S module */
|
|
# define STM32_NI2C 3 /* Three I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 0 /* No LCD */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 1 /* One USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* No HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 1 /* One CRC module */
|
|
# define STM32_NRNG 1 /* One Random number generator (RNG) */
|
|
# define STM32_NCAP 24 /* Twenty-four Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L072KB) || defined(CONFIG_ARCH_CHIP_STM32L072KZ)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* One LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2C 3 /* Three I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 0 /* No LCD */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 1 /* One USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* No HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 1 /* One CRC module */
|
|
# define STM32_NRNG 1 /* One Random number generator (RNG) */
|
|
# define STM32_NCAP 13 /* Thirteen Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L072CB) || defined(CONFIG_ARCH_CHIP_STM32L072CZ)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* One LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* One I2S module */
|
|
# define STM32_NI2C 3 /* Three I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 0 /* No LCD */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 1 /* One USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* No HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 1 /* One CRC module */
|
|
# define STM32_NRNG 1 /* One Random number generator (RNG) */
|
|
# define STM32_NCAP 18 /* Nineteen Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L072RB) || defined(CONFIG_ARCH_CHIP_STM32L072RZ)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* One LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* One I2S module */
|
|
# define STM32_NI2C 3 /* Three I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 0 /* No LCD */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 1 /* One USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* No HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 1 /* One CRC module */
|
|
# define STM32_NRNG 1 /* One Random number generator (RNG) */
|
|
# define STM32_NCAP 24 /* Twenty-four Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L073V8) || defined(CONFIG_ARCH_CHIP_STM32L073VB) || \
|
|
defined(CONFIG_ARCH_CHIP_STM32L073VZ)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* One LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* One I2S module */
|
|
# define STM32_NI2C 3 /* Three I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 1 /* One LCD controller */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 1 /* One USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* No HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 1 /* One CRC module */
|
|
# define STM32_NRNG 1 /* One Random number generator (RNG) */
|
|
# define STM32_NCAP 24 /* Twenty-four Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L073CB) || defined(CONFIG_ARCH_CHIP_STM32L073CZ)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* One LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* One I2S module */
|
|
# define STM32_NI2C 3 /* Three I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 1 /* One LCD controller */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 1 /* One USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* No HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 1 /* One CRC module */
|
|
# define STM32_NRNG 1 /* One Random number generator (RNG) */
|
|
# define STM32_NCAP 17 /* Seventeen Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32L073RB) || defined(CONFIG_ARCH_CHIP_STM32L073RZ)
|
|
# define STM32_NATIM 0 /* No advanced timers */
|
|
# define STM32_NGTIM16 4 /* 16-bit general up/down timers TIM2-3
|
|
* (with DMA) and TIM21-22 without DMA */
|
|
# define STM32_NGTIM32 0 /* No 32-bit general up/down timers */
|
|
# define STM32_NBTIM 2 /* Two basic timers: TIM6, TIM7 with DMA */
|
|
/* One LPTIMER */
|
|
# define STM32_NSPI 2 /* Two SPI modules SPI1-2 */
|
|
# define STM32_NI2S 1 /* One I2S module */
|
|
# define STM32_NI2C 3 /* Three I2C (2 with SMBus/PMBus) */
|
|
# define STM32_NDMA 1 /* One DMA1, 7-channels */
|
|
# define STM32_NUSART 4 /* Four USART modules, USART1-4 */
|
|
/* One LPUART */
|
|
# define STM32_NCAN 0 /* No CAN controllers */
|
|
# define STM32_NLCD 1 /* One LCD controller */
|
|
# define STM32_NUSBDEV 0 /* No USB full-speed device controller */
|
|
# define STM32_NUSBOTG 1 /* One USB OTG FS/HS (only USB 2.0 device) */
|
|
# define STM32_NCEC 0 /* No HDMI-CEC controller */
|
|
# define STM32_NADC 1 /* One 12-bit module */
|
|
# define STM32_NDAC 2 /* Two DAC channels */
|
|
# define STM32_NCOMP 2 /* Two Analog Comparators */
|
|
# define STM32_NCRC 1 /* One CRC module */
|
|
# define STM32_NRNG 1 /* One Random number generator (RNG) */
|
|
# define STM32_NCAP 24 /* Twenty-four Capacitive sensing channels */
|
|
# define STM32_NPORTS 6 /* Six GPIO ports, GPIOA-E, H */
|
|
|
|
#else
|
|
# error "Unsupported STM32F0xx chip"
|
|
#endif
|
|
|
|
/* NVIC priority levels *************************************************************/
|
|
/* Each priority field holds a priority value, 0-31. The lower the value, the greater
|
|
* the priority of the corresponding interrupt. The processor implements only
|
|
* bits[7:6] of each field, bits[5:0] read as zero and ignore writes.
|
|
*/
|
|
|
|
#define NVIC_SYSH_PRIORITY_MIN 0xc0 /* All bits[7:6] set is minimum priority */
|
|
#define NVIC_SYSH_PRIORITY_DEFAULT 0x80 /* Midpoint is the default */
|
|
#define NVIC_SYSH_PRIORITY_MAX 0x00 /* Zero is maximum priority */
|
|
#define NVIC_SYSH_PRIORITY_STEP 0x40 /* Two bits of interrupt priority used */
|
|
|
|
/************************************************************************************
|
|
* Public Types
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Functions
|
|
************************************************************************************/
|
|
|
|
#endif /* __ARCH_ARM_INCLUDE_STM32F0L0G0_CHIP_H */
|