incubator-nuttx/fs/nxffs/nxffs_dump.c

504 lines
14 KiB
C

/****************************************************************************
* fs/nxffs/nxffs_dump.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <string.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/crc32.h>
#include <nuttx/kmalloc.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/mtd/mtd.h>
#include "nxffs.h"
#include "fs_heap.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
struct nxffs_blkinfo_s
{
struct mtd_geometry_s geo;
FAR uint8_t *buffer;
off_t nblocks;
off_t block;
off_t offset;
#if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_FS)
bool verbose;
#endif
};
/****************************************************************************
* Private Data
****************************************************************************/
#if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_FS)
static const char g_hdrformat[] = " BLOCK:OFFS TYPE STATE LENGTH\n";
static const char g_format[] = " %5"PRIi32":%-5d %s %s %5"PRIu32"\n";
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: nxffs_analyzeinode
*
* Description:
* Analyze one candidate inode found in the block.
*
****************************************************************************/
#if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_FS)
static inline ssize_t nxffs_analyzeinode(FAR struct nxffs_blkinfo_s *blkinfo,
int offset)
{
FAR struct nxffs_inode_s inode;
off_t nextblock;
uint8_t state;
uint32_t noffs;
uint32_t doffs;
#if 0
uint32_t utc;
#endif
uint32_t ecrc;
uint32_t datlen;
uint32_t crc;
size_t spaceleft;
/* Verify that there is space for an inode header remaining in the block */
if (offset + SIZEOF_NXFFS_INODE_HDR > blkinfo->geo.blocksize)
{
/* No.. then this can't be an inode header */
return ERROR;
}
/* Unpack the header */
memcpy(&inode, &blkinfo->buffer[offset], SIZEOF_NXFFS_INODE_HDR);
noffs = nxffs_rdle32(inode.noffs);
doffs = nxffs_rdle32(inode.doffs);
#if 0
utc = nxffs_rdle32(inode.utc);
#endif
ecrc = nxffs_rdle32(inode.crc);
datlen = nxffs_rdle32(inode.datlen);
/* Misc. sanity checks */
if (noffs < blkinfo->offset + offset + SIZEOF_NXFFS_BLOCK_HDR)
{
/* The name begins before the inode header. This can't can't be
* a real inode header (or it is a corrupted one).
*/
return ERROR;
}
/* Can we verify the inode? We need to have the inode name in the same
* block to do that (or get access to the next block)
*/
if (doffs < blkinfo->offset + offset + SIZEOF_NXFFS_BLOCK_HDR)
{
/* The first data block begins before the inode header. This can't
* can't be a real inode header (or it is a corrupted one).
*/
return ERROR;
}
spaceleft = (blkinfo->nblocks - blkinfo->block) * blkinfo->geo.blocksize;
spaceleft -= (offset + SIZEOF_NXFFS_BLOCK_HDR);
if (datlen > spaceleft)
{
/* The data length is greater than what would fit in the rest of FLASH
* (even ignoring block and data header sizes.
*/
return ERROR;
}
/* The name begins after the inode header. Does it begin in this block? */
nextblock = blkinfo->offset + blkinfo->geo.blocksize;
if (noffs > nextblock)
{
/* Note than we cannot verify the inode header */
if (blkinfo->verbose)
{
syslog(LOG_NOTICE, g_format,
blkinfo->block, offset, "INODE", "UNVERFD", datlen);
}
return ERROR;
}
/* The name begins in this block. Does it also end in this block? */
if (noffs + inode.namlen > nextblock)
{
/* No.. Assume that this is not an inode. */
return ERROR;
}
/* Calculate the CRC */
state = inode.state;
inode.state = CONFIG_NXFFS_ERASEDSTATE;
nxffs_wrle32(inode.crc, 0);
crc = crc32((FAR const uint8_t *)&inode, SIZEOF_NXFFS_INODE_HDR);
crc = crc32part(&blkinfo->buffer[noffs - blkinfo->offset],
inode.namlen, crc);
if (crc != ecrc)
{
syslog(LOG_NOTICE, g_format,
blkinfo->block, offset, "INODE", "CRC BAD", datlen);
return ERROR;
}
/* If must be a good header */
if (state == INODE_STATE_FILE)
{
if (blkinfo->verbose)
{
syslog(LOG_NOTICE, g_format,
blkinfo->block, offset, "INODE", "OK ", datlen);
}
}
else if (state == INODE_STATE_DELETED)
{
if (blkinfo->verbose)
{
syslog(LOG_NOTICE, g_format,
blkinfo->block, offset, "INODE", "DELETED", datlen);
}
}
else
{
syslog(LOG_NOTICE, g_format,
blkinfo->block, offset, "INODE", "CORRUPT", datlen);
}
/* Return the block-relative offset to the next byte after the inode name */
return noffs + inode.namlen - offset - blkinfo->offset;
}
#endif
/****************************************************************************
* Name: nxffs_analyzedata
*
* Description:
* Analyze one candidate inode found in the block.
*
****************************************************************************/
#if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_FS)
static inline ssize_t nxffs_analyzedata(FAR struct nxffs_blkinfo_s *blkinfo,
int offset)
{
struct nxffs_data_s dathdr;
uint32_t ecrc;
uint16_t datlen;
uint32_t crc;
/* Copy and unpack the data block header */
memcpy(&dathdr, &blkinfo->buffer[offset], SIZEOF_NXFFS_DATA_HDR);
ecrc = nxffs_rdle32(dathdr.crc);
datlen = nxffs_rdle16(dathdr.datlen);
/* Sanity checks */
if (offset + SIZEOF_NXFFS_DATA_HDR + datlen > blkinfo->geo.blocksize)
{
/* Data does not fit in within the block, this can't be a data block */
return ERROR;
}
/* Calculate the CRC */
nxffs_wrle32(dathdr.crc, 0);
crc = crc32((FAR const uint8_t *)&dathdr, SIZEOF_NXFFS_DATA_HDR);
crc = crc32part(&blkinfo->buffer[offset + SIZEOF_NXFFS_DATA_HDR],
datlen, crc);
if (crc != ecrc)
{
syslog(LOG_NOTICE, g_format,
blkinfo->block, offset, "DATA ", "CRC BAD",
(long unsigned int)datlen);
return ERROR;
}
/* If must be a good header */
if (blkinfo->verbose)
{
syslog(LOG_NOTICE, g_format,
blkinfo->block, offset, "DATA ", "OK ",
(long unsigned int)datlen);
}
return SIZEOF_NXFFS_DATA_HDR + datlen;
}
#endif
/****************************************************************************
* Name: nxffs_analyze
*
* Description:
* Analyze the content of one block.
*
****************************************************************************/
#if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_FS)
static inline void nxffs_analyze(FAR struct nxffs_blkinfo_s *blkinfo)
{
FAR struct nxffs_block_s *blkhdr;
ssize_t nbytes;
int hdrndx;
int datndx;
int inndx;
int i;
/* Verify that there is a header on the block */
blkhdr = (FAR struct nxffs_block_s *)blkinfo->buffer;
if (memcmp(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE) != 0)
{
syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "NO FRMT",
blkinfo->geo.blocksize);
}
else if (blkhdr->state == BLOCK_STATE_GOOD)
{
size_t datsize = blkinfo->geo.blocksize - SIZEOF_NXFFS_BLOCK_HDR;
size_t nerased = nxffs_erased(blkinfo->buffer + SIZEOF_NXFFS_BLOCK_HDR,
datsize);
if (nerased == datsize)
{
if (blkinfo->verbose)
{
syslog(LOG_NOTICE,
g_format,
blkinfo->block,
0,
"BLOCK",
"ERASED ",
blkinfo->geo.blocksize);
}
return;
}
#if 0 /* Too much output, to little information */
else
{
syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "IN USE ",
blkinfo->geo.blocksize);
}
#endif
}
else if (blkhdr->state == BLOCK_STATE_BAD)
{
syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "BAD ",
blkinfo->geo.blocksize);
}
else
{
syslog(LOG_NOTICE, g_format, blkinfo->block, 0, "BLOCK", "CORRUPT",
blkinfo->geo.blocksize);
}
/* Search for Inode and data block headers. */
inndx = 0;
datndx = 0;
for (i = SIZEOF_NXFFS_BLOCK_HDR; i < blkinfo->geo.blocksize; i++)
{
uint8_t ch = blkinfo->buffer[i];
if (ch == g_inodemagic[inndx])
{
inndx++;
datndx = 0;
if (inndx == NXFFS_MAGICSIZE)
{
hdrndx = i - NXFFS_MAGICSIZE + 1;
nbytes = nxffs_analyzeinode(blkinfo, hdrndx);
if (nbytes > 0)
{
i = hdrndx + nbytes - 1;
}
inndx = 0;
}
}
else if (ch == g_datamagic[datndx])
{
datndx++;
inndx = 0;
if (datndx == NXFFS_MAGICSIZE)
{
hdrndx = i - NXFFS_MAGICSIZE + 1;
nbytes = nxffs_analyzedata(blkinfo, hdrndx);
if (nbytes > 0)
{
i = hdrndx + nbytes - 1;
}
datndx = 0;
}
}
}
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nxffs_dump
*
* Description:
* Dump a summary of the contents of an NXFFS file system.
* CONFIG_DEBUG_FEATURES and CONFIG_DEBUG_FS must be enabled
* for this function to do anything.
*
* Input Parameters:
* mtd - The MTD device that provides the interface to NXFFS-formatted
* media.
* verbose - FALSE: only show errors
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int nxffs_dump(FAR struct mtd_dev_s *mtd, bool verbose)
{
#if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_FS)
struct nxffs_blkinfo_s blkinfo;
int ret;
/* Get the volume geometry. (casting to uintptr_t first eliminates
* complaints on some architectures where the sizeof long is different
* from the size of a pointer).
*/
memset(&blkinfo, 0, sizeof(struct nxffs_blkinfo_s));
ret = MTD_IOCTL(mtd,
MTDIOC_GEOMETRY,
(unsigned long)((uintptr_t)&blkinfo.geo));
if (ret < 0)
{
ferr("ERROR: MTD ioctl(MTDIOC_GEOMETRY) failed: %d\n", -ret);
return ret;
}
/* Save the verbose output indication */
blkinfo.verbose = verbose;
/* Allocate a buffer to hold one block */
blkinfo.buffer = fs_heap_malloc(blkinfo.geo.blocksize);
if (!blkinfo.buffer)
{
ferr("ERROR: Failed to allocate block cache\n");
return -ENOMEM;
}
/* Now read every block on the device */
syslog(LOG_NOTICE, "NXFFS Dump:\n");
syslog(LOG_NOTICE, g_hdrformat);
blkinfo.nblocks = blkinfo.geo.erasesize * blkinfo.geo.neraseblocks /
blkinfo.geo.blocksize;
for (blkinfo.block = 0, blkinfo.offset = 0;
blkinfo.block < blkinfo.nblocks;
blkinfo.block++, blkinfo.offset += blkinfo.geo.blocksize)
{
/* Read the next block */
ret = MTD_BREAD(mtd, blkinfo.block, 1, blkinfo.buffer);
if (ret < 0)
{
#ifndef CONFIG_NXFFS_NAND
/* Read errors are fatal */
ferr("ERROR: Failed to read block %d\n", blkinfo.block);
fs_heap_free(blkinfo.buffer);
return ret;
#else
/* A read error is probably fatal on all media but NAND.
* On NAND, the read error probably just signifies a block
* with an uncorrectable ECC failure. So, to handle NAND,
* just report the read error and continue.
*/
syslog(LOG_NOTICE, g_format, blkinfo.block, 0, "BLOCK", "RD FAIL",
blkinfo.geo.blocksize);
#endif
}
else
{
/* Analyze the block that we just read */
nxffs_analyze(&blkinfo);
}
}
syslog(LOG_NOTICE, "%" PRIi32 " blocks analyzed\n", blkinfo.nblocks);
fs_heap_free(blkinfo.buffer);
return OK;
#else
return -ENOSYS;
#endif
}