112 lines
3.9 KiB
Plaintext
112 lines
3.9 KiB
Plaintext
README.txt
|
|
^^^^^^^^^^
|
|
|
|
ZDS-II Compiler Versions
|
|
^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
4.10.1
|
|
The ZDS-II version 4.10.2 will not compile NuttX. It reports "internal
|
|
errors" on one of the files, mm/mm_initialize.c. Below is a simple work-
|
|
around. With this work-around in place, NuttX builds successfully with
|
|
the 4.10.1 compiler.
|
|
|
|
--- mm/mm_initialize.c.SAVE 2008-02-13 08:06:46.833857700 -0600
|
|
+++ mm/mm_initialize.c 2008-02-13 08:07:26.367608900 -0600
|
|
@@ -94,8 +94,11 @@
|
|
{
|
|
int i;
|
|
|
|
+#if 0 /* DO NOT CHECK IN */
|
|
CHECK_ALLOCNODE_SIZE;
|
|
CHECK_FREENODE_SIZE;
|
|
+#endif
|
|
|
|
/* Set up global variables */
|
|
|
|
Version 4.9.5
|
|
This is the latest tool version listed on the ZiLOG site for the Z8F6403.
|
|
However, it uses different compiler command line arguments.
|
|
|
|
Version 5.0.0
|
|
|
|
On November 28, 2012, all of the z8 configurations were converted to use 5.0.0,
|
|
but have not been verified on a running target.
|
|
|
|
Paths were also updated that are specific to a 32-bit toolchain running on
|
|
a 64 bit windows platform. Change to a different toolchain, you will need
|
|
to modify the versioning in Make.defs and setenv.sh; if you want to build
|
|
on a different platform, you will need to change the path in the ZDS binaries
|
|
in those same files.
|
|
|
|
Other Versions
|
|
If you use any version of ZDS-II other than 5.0.0 or if you install ZDS-II
|
|
at any location other than the default location, you will have to modify
|
|
two files: (1) configs/z8f64200100kit/*/setenv.sh and (2)
|
|
configs/z8f64200100kit/*/Make.defs.
|
|
|
|
Configuration Subdirectories
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
- src/ and include/
|
|
These directories contain common logic for all z8f64200100kit
|
|
configurations.
|
|
|
|
Variations on the basic z8f64200100kit configuration are maintained
|
|
in subdirectories. To configure any specific configuration, do the
|
|
following steps:
|
|
|
|
cd <nuttx-top-directory>/tools
|
|
./configure.sh z8f64200100kit/<sub-directory>
|
|
cd <nuttx-top-directgory>
|
|
make
|
|
|
|
Where <sub-directory> is the specific board configuration that you
|
|
wish to build. The following board-specific configurations are
|
|
available:
|
|
|
|
- ostest
|
|
This builds the examples/ostest application for execution from FLASH.
|
|
See examples/README.txt for information about ostest.
|
|
|
|
NOTES:
|
|
|
|
1. This configuration uses the mconf-based configuration tool. To
|
|
change this configuration using that tool, you should:
|
|
|
|
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
|
and misc/tools/
|
|
|
|
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
|
reconfiguration process.
|
|
|
|
2. By default, this configuration assumes that you are using the
|
|
Cygwin environment on Windows. An option is to use the native
|
|
CMD.exe window build as described in the top-level README.txt
|
|
file. To set up that configuration:
|
|
|
|
-CONFIG_WINDOWS_CYGWIN=y
|
|
+CONFIG_WINDOWS_NATIVE=y
|
|
|
|
And after configuring, make sure that CONFIG_APPS_DIR uses
|
|
the back slash character. For example:
|
|
|
|
CONFIG_APPS_DIR="..\apps"
|
|
|
|
NOTES:
|
|
|
|
a. If you need to change the toolchain path used in Make.defs, you
|
|
will need to use the short 8.3 filenames to avoid spaces. On my
|
|
PC, C:\PROGRA~1\ is is C:\Program Files\ and C:\PROGRA~2\ is
|
|
C:\Program Files (x86)\
|
|
b. You can't use setenv.sh in the native Windows environment. Try
|
|
scripts/setenv.bat instead.
|
|
c. At present, the native Windows build fails at the final link stages.
|
|
The failure is due to problems in arch/z80/src/nuttx.linkcmd that
|
|
is autogenerated by arch/z80/src/Makefile.zdsii. The basic problem
|
|
is the spurious spaces and and carrirage returns are generated at
|
|
the end of the lines after a line continuation (\ ^M). If these
|
|
trailing bad characters are manually eliminated, then the build
|
|
will succeed on the next try.
|
|
|
|
Check out any README.txt files in these <sub-directory>s.
|