incubator-nuttx/net/arp/arp_arpin.c

166 lines
6.0 KiB
C

/****************************************************************************
* net/arp/arp_arpin.c
*
* Copyright (C) 2007-2011, 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Based on uIP which also has a BSD style license:
*
* Author: Adam Dunkels <adam@dunkels.com>
* Copyright (c) 2001-2003, Adam Dunkels.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <string.h>
#include <debug.h>
#include <netinet/in.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/arp.h>
#include "arp/arp.h"
#ifdef CONFIG_NET_ARP
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define ETHBUF ((FAR struct eth_hdr_s *)&dev->d_buf[0])
#define ARPBUF ((FAR struct arp_hdr_s *)&dev->d_buf[ETH_HDRLEN])
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: arp_arpin
*
* Description:
* This function should be called by the Ethernet device driver when an
* ARP packet has been received. The function will act differently
* depending on the ARP packet type: if it is a reply for a request
* that we previously sent out, the ARP cache will be filled in with
* the values from the ARP reply. If the incoming ARP packet is an ARP
* request for our IP address, an ARP reply packet is created and put
* into the d_buf buffer.
*
* On entry, this function expects that an ARP packet with a prepended
* Ethernet header is present in the d_buf buffer and that the length of
* the packet is set in the d_len field.
*
* When the function returns, the value of the field d_len indicates
* whether the device driver should send out the ARP reply packet or not.
* If d_len is zero, no packet should be sent; If d_len is non-zero, it
* contains the length of the outbound packet that is present in the
* d_buf buffer.
*
****************************************************************************/
void arp_arpin(FAR struct net_driver_s *dev)
{
FAR struct arp_hdr_s *arp = ARPBUF;
in_addr_t ipaddr;
if (dev->d_len < (sizeof(struct arp_hdr_s) + ETH_HDRLEN))
{
nerr("ERROR: Packet Too small\n");
dev->d_len = 0;
return;
}
dev->d_len = 0;
ipaddr = net_ip4addr_conv32(arp->ah_dipaddr);
switch (arp->ah_opcode)
{
case HTONS(ARP_REQUEST):
ninfo("ARP request for IP %04lx\n", (unsigned long)ipaddr);
/* ARP request. If it asked for our address, we send out a reply. */
if (net_ipv4addr_cmp(ipaddr, dev->d_ipaddr))
{
FAR struct eth_hdr_s *eth = ETHBUF;
/* First, we register the one who made the request in our ARP
* table, since it is likely that we will do more communication
* with this host in the future.
*/
arp_hdr_update(dev, arp->ah_sipaddr, arp->ah_shwaddr);
arp->ah_opcode = HTONS(ARP_REPLY);
memcpy(arp->ah_dhwaddr, arp->ah_shwaddr, ETHER_ADDR_LEN);
memcpy(arp->ah_shwaddr, dev->d_mac.ether.ether_addr_octet,
ETHER_ADDR_LEN);
memcpy(eth->src, dev->d_mac.ether.ether_addr_octet,
ETHER_ADDR_LEN);
memcpy(eth->dest, arp->ah_dhwaddr, ETHER_ADDR_LEN);
arp->ah_dipaddr[0] = arp->ah_sipaddr[0];
arp->ah_dipaddr[1] = arp->ah_sipaddr[1];
net_ipv4addr_hdrcopy(arp->ah_sipaddr, &dev->d_ipaddr);
arp_dump(arp);
eth->type = HTONS(ETHTYPE_ARP);
dev->d_len = sizeof(struct arp_hdr_s) + ETH_HDRLEN;
}
break;
case HTONS(ARP_REPLY):
ninfo("ARP reply for IP %04lx\n", (unsigned long)ipaddr);
/* ARP reply. We insert or update the ARP table if it was meant
* for us.
*/
if (net_ipv4addr_cmp(ipaddr, dev->d_ipaddr))
{
/* Yes... Insert the address mapping in the ARP table */
arp_hdr_update(dev, arp->ah_sipaddr, arp->ah_shwaddr);
/* Then notify any logic waiting for the ARP result */
arp_notify(net_ip4addr_conv32(arp->ah_sipaddr));
}
break;
}
}
#endif /* CONFIG_NET_ARP */