OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/net/utils/net_snoop.c

538 lines
15 KiB
C
Raw Blame History

/****************************************************************************
* net/utils/net_snoop.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <assert.h>
#include <endian.h>
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <sys/time.h>
#include <string.h>
#include <sys/param.h>
#include <nuttx/net/snoop.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define SNOOP_VERSION_1 1
#define SNOOP_VERSION_2 2
/* microseconds since midnight, January 1st, 0 AD nominal Gregorian. */
#define SNOOP_EPOCH_USEC(tv) (((tv).tv_sec - 0x386d4380ll) * 1000000ll \
+ (tv).tv_usec + 0x00e03ab44a676000ll)
/****************************************************************************
* Private Type Definitions
****************************************************************************/
/* The availability of tools to capture, display and interpret packets
* traversing a network has proven extremely useful in debugging
* networking problems. The ability to capture packets and store them
* for later analysis allows one to de-couple the tasks of collecting
* information about a network problem and analysing that information.
*
* More info about snoop datalink type, please refer to
* https://www.rfc-editor.org/rfc/rfc1761.txt and
* https://fte.com/webhelpii/hsu/Content/Technical_Information/
* BT_Snoop_File_Format.htm
*/
/* The snoop packet capture file is an array of octets structured as
* follows:
*
* +------------------------+
* | |
* | File Header |
* | |
* +------------------------+
* | |
* | Packet Record |
* ~ Number 1 ~
* | |
* +------------------------+
* . .
* . .
* . .
* +------------------------+
* | |
* | Packet Record |
* ~ Number N ~
* | |
* +------------------------+
*/
/* snoop_file_header_s
*
* The structure of the File Header is as follows:
*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | |
* + Identification Pattern +
* | |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Version Number |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Datalink Type |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
begin_packed_struct struct snoop_file_header_s
{
uint8_t magic[8]; /* Identification Pattern */
uint32_t version; /* Version Number */
uint32_t datalink; /* Datalink Type */
} end_packed_struct;
/* snoop_packet_header_s
*
* The structure of the packet record is as follows:
*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Original Length |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Included Length |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Packet Record Length |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Cumulative Drops |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Timestamp Seconds |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Timestamp Microseconds |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | |
* . .
* . Packet Data .
* . .
* + +- - - - - - - -+
* | | Pad |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
begin_packed_struct struct snoop_packet_header_s
{
uint32_t orig_len; /* actual length of packet */
uint32_t incl_len; /* number of octets captured in file */
union
{
uint32_t flags; /* Packet Flags: 1 hci cmd , eg: btsnoop */
uint32_t rec_len; /* length of record */
};
uint32_t cum_drops; /* cumulative number of dropped packets */
union
{
uint64_t ts_usec; /* timestamp microseconds, eg: btsnoop */
struct
{
uint32_t ts_sec; /* timestamp seconds */
uint32_t ts_usec; /* timestamp microseconds */
} ts;
};
} end_packed_struct;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: snoop_fill_packet_header
*
* Description:
* This function fill snoop packet header info.
*
****************************************************************************/
static void snoop_fill_packet_header(FAR struct snoop_s *snoop,
uint32_t bytes, uint32_t drops,
uint32_t flags, FAR struct
snoop_packet_header_s *header)
{
struct timeval tv;
switch (snoop->datalink)
{
case SNOOP_DATALINK_HCI_UNENCAP:
case SNOOP_DATALINK_HCI_UART:
case SNOOP_DATALINK_HCI_BSCP:
case SNOOP_DATALINK_HCI_SERIAL:
gettimeofday(&tv, NULL);
header->ts_usec = htobe64(SNOOP_EPOCH_USEC(tv));
header->flags = htobe32(flags);
break;
case SNOOP_DATALINK_TYPE_TOKENBUS:
case SNOOP_DATALINK_TYPE_TOKERING:
case SNOOP_DATALINK_TYPE_METRONET:
case SNOOP_DATALINK_TYPE_ETHERNET:
case SNOOP_DATALINK_TYPE_HDLC:
case SNOOP_DATALINK_TYPE_CHARSYNC:
case SNOOP_DATALINK_TYPE_IBMC2C:
case SNOOP_DATALINK_TYPE_FDDI:
case SNOOP_DATALINK_TYPE_OTHER:
gettimeofday(&tv, NULL);
header->ts.ts_sec = htobe32(tv.tv_sec);
header->ts.ts_usec = htobe32(tv.tv_usec);
header->rec_len = htobe32(flags);
break;
default:
DEBUGASSERT(false);
}
header->orig_len = htobe32(bytes);
header->incl_len = htobe32(bytes);
header->cum_drops = htobe32(drops);
}
/****************************************************************************
* Name: snoop_flush
*
* Description:
* This function could flush snoop buf into file.
*
****************************************************************************/
static int snoop_flush(FAR struct snoop_s *snoop)
{
ssize_t ret;
if (snoop->next == 0)
{
return 0;
}
do
{
ret = file_write(&snoop->filep, snoop->buf, snoop->next);
if (ret < 0)
{
break;
}
snoop->next -= ret;
memmove(snoop->buf, snoop->buf + ret, snoop->next);
}
while (snoop->next > 0);
#ifndef CONFIG_DISABLE_MOUNTPOINT
if (snoop->autosync)
{
ret = file_fsync(&snoop->filep);
}
#endif
return ret;
}
/****************************************************************************
* Name: snoop_flush_lock
*
* Description:
* Snoop flush atomic
*
****************************************************************************/
static int snoop_flush_lock(FAR struct snoop_s *snoop)
{
irqstate_t flags;
int ret;
flags = enter_critical_section();
nxmutex_lock(&snoop->mutex);
ret = snoop_flush(snoop);
nxmutex_unlock(&snoop->mutex);
leave_critical_section(flags);
return ret;
}
/****************************************************************************
* Name: snoop_flush_work
*
* Description:
* Do snoop flush work.
*
****************************************************************************/
static void snoop_flush_work(FAR void *arg)
{
snoop_flush_lock((FAR struct snoop_s *)arg);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: snoop_open
*
* Description:
* This function open snoop file by datalink.
*
* Input Parameters:
* snoop The snoop driver struct
* filename Snoop file name
* datalink Snoop datalink type, such as SNOOP_DATALINK_TYPE_XX
* autosync whether do file_sync when snoop_dump
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
int snoop_open(FAR struct snoop_s *snoop, FAR const char *filename,
uint32_t datalink, bool autosync)
{
struct snoop_file_header_s header;
int ret;
if (!snoop)
{
return -EINVAL;
}
switch (datalink)
{
case SNOOP_DATALINK_TYPE_TOKENBUS:
case SNOOP_DATALINK_TYPE_TOKERING:
case SNOOP_DATALINK_TYPE_METRONET:
case SNOOP_DATALINK_TYPE_ETHERNET:
case SNOOP_DATALINK_TYPE_HDLC:
case SNOOP_DATALINK_TYPE_CHARSYNC:
case SNOOP_DATALINK_TYPE_IBMC2C:
case SNOOP_DATALINK_TYPE_FDDI:
case SNOOP_DATALINK_TYPE_OTHER:
{
static const uint8_t snoop_magic[] =
{
's', 'n', 'o', 'o', 'p', '\0', '\0', '\0'
};
memcpy(header.magic, snoop_magic, nitems(snoop_magic));
header.version = htobe32(SNOOP_VERSION_2);
break;
};
case SNOOP_DATALINK_HCI_UNENCAP:
case SNOOP_DATALINK_HCI_UART:
case SNOOP_DATALINK_HCI_BSCP:
case SNOOP_DATALINK_HCI_SERIAL:
{
static const uint8_t btsnoop_magic[] =
{
'b', 't', 's', 'n', 'o', 'o', 'p', '\0'
};
memcpy(header.magic, btsnoop_magic, nitems(btsnoop_magic));
header.version = htobe32(SNOOP_VERSION_1);
break;
}
default:
{
return -EINVAL;
}
}
ret = file_open(&snoop->filep, filename, O_RDWR | O_CREAT | O_CLOEXEC,
0666);
if (ret < 0)
{
return ret;
}
snoop->datalink = datalink;
snoop->autosync = autosync;
snoop->next = 0;
header.datalink = htobe32(datalink);
ret = file_write(&snoop->filep, &header, sizeof(header));
if (ret != sizeof(header))
{
ret = ret < 0 ? ret : -EINVAL;
goto error;
}
nxmutex_init(&snoop->mutex);
return OK;
error:
snoop_close(snoop);
return ret;
}
/****************************************************************************
* Name: snoop_dump
*
* Description:
* This function dump nbytes buf data into snoop file.
*
* Input Parameters:
* snoop The snoop driver struct
* buf Snoop buffer
* nbytes Snoop buffer size
* drops cumulative number of dropped packets
* flags Packet Flags: 1 hci cmd , eg: btsnoop
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
int snoop_dump(FAR struct snoop_s *snoop, FAR const void *buf,
uint32_t nbytes, uint32_t drops, uint32_t flags)
{
struct snoop_packet_header_s header;
irqstate_t irqflags;
int ret = 0;
if (!snoop)
{
return -EINVAL;
}
snoop_fill_packet_header(snoop, nbytes, drops, flags, &header);
irqflags = enter_critical_section();
if (up_interrupt_context())
{
if (sizeof(snoop->buf) - snoop->next <
nbytes + sizeof(struct snoop_packet_header_s))
{
ret = -ENOMEM;
goto out_leave;
}
memcpy(snoop->buf + snoop->next, &header, sizeof(header));
snoop->next += sizeof(header);
memcpy(snoop->buf + snoop->next, buf, nbytes);
snoop->next += nbytes;
if (work_available(&snoop->work))
{
work_queue(HPWORK, &snoop->work, snoop_flush_work, snoop, 0);
}
goto out_leave;
}
else
{
nxmutex_lock(&snoop->mutex);
ret = snoop_flush(snoop);
if (ret < 0)
{
goto out_unlock;
}
ret = file_write(&snoop->filep, &header, sizeof(header));
if (ret < 0)
{
goto out_unlock;
}
else if (ret != sizeof(header))
{
ret = -EINVAL;
goto out_unlock;
}
ret = file_write(&snoop->filep, buf, nbytes);
if (ret < 0)
{
goto out_unlock;
}
else if (ret != nbytes)
{
ret = -EINVAL;
goto out_unlock;
}
}
out_unlock:
nxmutex_unlock(&snoop->mutex);
out_leave:
leave_critical_section(irqflags);
return ret;
}
/****************************************************************************
* Name: snoop_sync
*
* Description:
* This function sync snoop buffer.
*
* Input Parameters:
* snoop The snoop driver struct
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
int snoop_sync(FAR struct snoop_s *snoop)
{
if (!snoop)
{
return -EINVAL;
}
return snoop_flush_lock(snoop);
}
/****************************************************************************
* Name: snoop_close
*
* Description:
* This function close snoop file.
*
* Input Parameters:
* snoop The snoop driver struct
*
* Returned Value:
* OK on success; Negated errno on failure.
*
* Assumptions:
*
****************************************************************************/
int snoop_close(FAR struct snoop_s *snoop)
{
if (!snoop)
{
return -EINVAL;
}
nxmutex_destroy(&snoop->mutex);
return file_close(&snoop->filep);
}
Reference in New Issue View Git Blame Copy Permalink