zhanghongyu 948d51cd67 e1000: add polling mode support for tx/rx ... In scenarios that require high time accuracy, we do not want an interrupt from the NIC to interrupt the current task, so add support for polling mode. Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>		2024-10-08 13:15:31 +02:00
..
CMakeLists.txt	…
Kconfig	…
Make.defs	…
dm90x0.c	…
e1000.c	e1000: add polling mode support for tx/rx	2024-10-08 13:15:31 +02:00
e1000.h	…
enc28j60.c	…
enc28j60.h	…
encx24j600.c	…
encx24j600.h	…
ftmac100.c	…
igc.c	…
igc.h	…
ksz9477.c	…
ksz9477_i2c.c	…
ksz9477_reg.h	…
lan91c111.c	…
lan91c111.h	…
lan9250.c	1.xtensa/esp32s3: configure the number of universal management	2024-09-28 11:47:24 +08:00
lan9250.h	…
loopback.c	…
netdev_upperhalf.c	…
phy_notify.c	…
rpmsgdrv.c	rpmsg services: should release the tx buffer when rpmsg_send_nocopy failed	2024-10-08 18:26:39 +08:00
skeleton.c	…
slip.c	…
telnet.c	vfs/file: add reference counting to prevent accidental close during reading writing...	2024-09-17 12:01:53 +08:00
tun.c	drivers/net: Register "/dev/net/tun" as tun node too	2024-10-08 11:16:01 +08:00
w5500.c	…
wifi_sim.c	…