OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/include/nuttx/board.h

881 lines
33 KiB
C
Raw Blame History

/****************************************************************************
* include/nuttx/board.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* This header file contains function prototypes for the interfaces between
* (1) the nuttx core-code, (2) the microprocessor specific logic that
* resides under the arch/ sub-directory, and (3) the board-specific logic
* that resides under boards/
*
* Naming conventions:
*
* 1. Common Microprocessor Interfaces.
*
* Any interface that is common across all microprocessors should be
* prefixed with up_ and prototyped in this header file. These
* definitions provide the common interface between NuttX and the
* architecture-specific implementation in arch/
*
* These definitions are retained in the header file
* nuttx/include/arch.h
*
* NOTE: up_ is supposed to stand for microprocessor; the u is like the
* Greek letter micron: µ. So it would be µP which is a common
* shortening of the word microprocessor.
*
* 2. Microprocessor-Specific Interfaces.
*
* An interface which is unique to a certain microprocessor should be
* prefixed with the name of the microprocessor, for example stm32_,
* and be prototyped in some header file in the arch/ directories.
*
* There is also a arch/<architecture>/include/<chip>/chip.h header file
* that can be used to communicate other microprocessor-specific
* information between the board logic and even application logic.
* Application logic may, for example, need to know specific capabilities
* of the chip. Prototypes in that chip.h header file should follow the
* microprocessor specific naming convention.
*
* 3. Common Board Interfaces.
*
* Any interface that is common across all boards should be prefixed
* with board_ and should be prototyped in this header file. These
* board_ definitions provide the interface between the board-level
* logic and the architecture-specific logic.
*
* Board related declarations are retained in this header file.
*
* There is also a boards/<arch>/<chip>/<board>/include/board.h header
* file that can be used to communicate other board-specific information
* between the architecture logic and even application logic. Any
* definitions that are common between a single architecture and several
* boards should go in this board.h header file; this file is reserved
* for board-related definitions common to all architectures.
*
* 4. Board-Specific Interfaces.
*
* Any interface that is unique to a board should be prefixed with
* the board name, for example stm32f4discovery_. Sometimes the board
* name is too long so stm32_ would be okay too. These should be
* prototyped in boards/<arch>/<chip>/<board>/src/<board>.h and should
* not be used outside of that board directory since board-specific
* definitions have no meaning outside of the board directory.
*/
#ifndef __INCLUDE_NUTTX_BOARD_H
#define __INCLUDE_NUTTX_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/compiler.h>
#ifdef CONFIG_ARCH_IRQBUTTONS
# include <nuttx/irq.h>
#endif
#ifdef CONFIG_BOARDCTL_RESET_CAUSE
# include <sys/boardctl.h>
#endif
/****************************************************************************
* Public Function Prototypes
*
* These are all standard board interfaces that are exported from board-
* specific logic to OS internal logic. These should never be accessed
* directly from application code but may be freely used within the OS
*
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: board_early_initialize
*
* Description:
* If CONFIG_BOARD_EARLY_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_early_initialize(). board_early_initialize()
* will be called immediately after up_initialize() and well before
* board_early_initialize() is called and the initial application is
* started. The context in which board_early_initialize() executes is
* suitable for early initialization of most, simple device drivers and
* is a logical, board-specific extension of up_initialize().
*
* board_early_initialize() runs on the startup, initialization thread.
* Some initialization operations cannot be performed on the start-up,
* initialization thread. That is because the initialization thread
* cannot wait for event. Waiting may be required, for example, to
* mount a file system or or initialize a device such as an SD card.
* For this reason, such driver initialize must be deferred to
* board_late_initialize().
****************************************************************************/
#ifdef CONFIG_BOARD_EARLY_INITIALIZE
void board_early_initialize(void);
#endif
/****************************************************************************
* Name: board_late_initialize
*
* Description:
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_late_initialize(). board_late_initialize() will
* be called after up_initialize() and board_early_initialize() and just
* before the initial application is started. This additional
* initialization phase may be used, for example, to initialize board-
* specific device drivers for which board_early_initialize() is not
* suitable.
*
* Waiting for events, use of I2C, SPI, etc are permissible in the context
* of board_late_initialize(). That is because board_late_initialize()
* will run on a temporary, internal kernel thread.
*
****************************************************************************/
#ifdef CONFIG_BOARD_LATE_INITIALIZE
void board_late_initialize(void);
#endif
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform application specific initialization. This function is never
* called directly from application code, but only indirectly via the
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
*
* Input Parameters:
* arg - The boardctl() argument is passed to the board_app_initialize()
* implementation without modification. The argument has no
* meaning to NuttX; the meaning of the argument is a contract
* between the board-specific initialization logic and the
* matching application logic. The value could be such things as a
* mode enumeration value, a set of DIP switch switch settings, a
* pointer to configuration data read from a file or serial FLASH,
* or whatever you would like to do with it. Every implementation
* should accept zero/NULL as a default configuration.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
int board_app_initialize(uintptr_t arg);
/****************************************************************************
* Name: board_app_finalinitialize
*
* Description:
* Perform application specific initialization. This function is never
* called directly from application code, but only indirectly via the
* (non-standard) boardctl() interface using the command
* BOARDIOC_FINALINIT.
*
* Input Parameters:
* arg - The argument has no meaning.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_FINALINIT
int board_app_finalinitialize(uintptr_t arg);
#endif
/****************************************************************************
* Name: board_power_off
*
* Description:
* Power off the board. This function may or may not be supported by a
* particular board architecture.
*
* Input Parameters:
* status - Status information provided with the reset event. This
* meaning of this status information is board-specific. If not used by
* a board, the value zero may be provided in calls to board_power_off.
*
* Returned Value:
* If this function returns, then it was not possible to power-off the
* board due to some constraints. The return value int this case is a
* board-specific reason for the failure to shutdown.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_POWEROFF
int board_power_off(int status);
#endif
/****************************************************************************
* Name: board_reset
*
* Description:
* Reset board. Support for this function is required by board-level
* logic if CONFIG_BOARDCTL_RESET is selected.
*
* Input Parameters:
* status - Status information provided with the reset event. This
* meaning of this status information is board-specific. If not
* used by a board, the value zero may be provided in calls to
* board_reset().
*
* Returned Value:
* If this function returns, then it was not possible to power-off the
* board due to some constraints. The return value int this case is a
* board-specific reason for the failure to shutdown.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_RESET
int board_reset(int status);
#endif
/****************************************************************************
* Name: board_uniqueid
*
* Description:
* Return a unique ID associated with the board. The meaning of this
* unique ID is not specified. It may be a chip identifying number, a
* serial number, a MAC address, etc. It may be in binary or it may be
* ASCII. The only only requirement is that the length of the unique
* ID be exactly CONFIG_BOARDCTL_UNIQUEID_SIZE in length.
*
* Input Parameters:
* uniqueid - A reference to a writable memory location provided by the
* caller to receive the board unique ID. The memory memory referenced
* by this pointer must be at least CONFIG_BOARDCTL_UNIQUEID_SIZE in
* length.
*
* Returned Value:
* Zero (OK) is returned on success. Otherwise a negated errno value is
* returned indicating the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_UNIQUEID
int board_uniqueid(FAR uint8_t *uniqueid);
#endif
/****************************************************************************
* Name: board_uniquekey
*
* Description:
* Return a unique KEY associated with the board. The meaning of this
* unique KEY is not specified. It may be a trusted key or a private
* identity, etc. The only requirement is that the length of the
* unique KEY be exactly CONFIG_BOARDCTL_UNIQUEKEY_SIZE in length.
*
* Input Parameters:
* uniquekey - A reference to a writable memory location provided by the
* caller to receive the board unique KEY. The memory memory referenced
* by this pointer must be at least CONFIG_BOARDCTL_UNIQUEKEY_SIZE in
* length.
*
* Returned Value:
* Zero (OK) is returned on success. Otherwise a negated errno value is
* returned indicating the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_UNIQUEKEY
int board_uniquekey(FAR uint8_t *uniquekey);
#endif
/****************************************************************************
* Name: board_switch_boot
*
* Description:
* BOARDIOC_SWITCH_BOOT is required to communicate the boot partition from
* userspace (OTA subsystem) to board, it can be used to change the system
* boot behavior. It's useful for A/B boot or even in the single boot case.
*
* Input Parameters:
* system - The boot system updated or specified
*
* Returned Value:
* Zero (OK) is returned on success. Otherwise a negated errno value is
* returned indicating the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_SWITCH_BOOT
int board_switch_boot(FAR const char *system);
#endif
/****************************************************************************
* Name: board_boot_image
*
* Description:
* Boot a new application firmware image. Execute the required actions for
* booting a new application firmware image (e.g. deinitialize peripherals,
* load the Program Counter register with the application firmware image
* entry point address).
*
* Input Parameters:
* path - Path to the new application firmware image to be booted.
* hdr_size - Image header size in bytes. This value may be useful for
* skipping metadata information preprended to the application
* image.
*
* Returned Value:
* If this function returns, then it was not possible to load the
* application firmware image due to some constraints. The return value in
* this case is a board-specific reason for the failure.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_BOOT_IMAGE
int board_boot_image(FAR const char *path, uint32_t hdr_size);
#endif
/****************************************************************************
* Name: board_timerhook
*
* Description:
* If the system is not configured for Tickless operation, then a system
* timer interrupt will be used. If CONFIG_SYSTEMTICK_HOOK is selected
* then the OS will call out to this user-provided function on every
* timer interrupt. This permits custom actions that may be performed on
* each by boad-specific, OS internal logic.
*
* Input Parameters:
* None
*
* Returned Value:
* None.
*
****************************************************************************/
#ifdef CONFIG_SYSTEMTICK_HOOK
void board_timerhook(void);
#endif
/****************************************************************************
* Name: board_<usbdev>_initialize
*
* Description:
* Initialize the USB device <usbdev> on the specified USB device port.
*
* Input Parameters:
* port- The USB device port.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_USBDEVCTRL
#ifdef CONFIG_CDCACM
#endif
#ifdef CONFIG_USBMSC
int board_usbmsc_initialize(int port);
#endif
#ifdef CONFIG_USBDEV_COMPOSITE
int board_composite_initialize(int port);
#endif
#endif
/****************************************************************************
* Name: board_composite_connect
*
* Description:
* Connect the USB composite device on the specified USB device port using
* the specified configuration. The interpretation of the configid is
* board specific.
*
* Input Parameters:
* port - The USB device port.
* configid - The USB composite configuration
*
* Returned Value:
* A non-NULL handle value is returned on success. NULL is returned on
* any failure.
*
****************************************************************************/
#if defined(CONFIG_BOARDCTL_USBDEVCTRL) && defined(CONFIG_USBDEV_COMPOSITE)
FAR void *board_composite_connect(int port, int configid);
#endif
/****************************************************************************
* Name: board_usbdev_serialstr
*
* Description:
* Use board unique serial number string to iSerialNumber field in the
* device descriptor. This is for determining the board when multiple
* boards on the same host.
*
* Returned Value:
* The board unique serial number string.
*
****************************************************************************/
#if defined(CONFIG_BOARD_USBDEV_SERIALSTR)
FAR const char *board_usbdev_serialstr(void);
#endif
/****************************************************************************
* Name: board_usbdev_pid,board_usbdev_vid
*
* Description:
* Use board unique pid/vid in the device descriptor. This is for that
* usb can be dynamically configured while the board is running
*
* Returned Value:
* The board unique pid/vid.
*
****************************************************************************/
#if defined(CONFIG_BOARD_USBDEV_PIDVID)
uint16_t board_usbdev_pid(void);
uint16_t board_usbdev_vid(void);
#endif
/****************************************************************************
* Name: board_graphics_setup
*
* Description:
* If the driver for the graphics device on the platform some unusual
* initialization, then this board interface should be provided.
*
* This is an internal OS interface. It is invoked by graphics sub-system
* initialization logic (nxmu_start()) or from the LCD framebuffer driver
* (when the NX server is not used).
*
****************************************************************************/
#if defined(CONFIG_NX_LCDDRIVER) || defined(CONFIG_LCD_FRAMEBUFFER)
struct lcd_dev_s;
FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno);
#else
struct fb_vtable_s;
FAR struct fb_vtable_s *board_graphics_setup(unsigned int devno);
#endif
/****************************************************************************
* Name: board_ioctl
*
* Description:
* If CONFIG_BOARDCTL=y, boards may also select CONFIG_BOARDCTL_IOCTL=y
* enable board specific commands. In this case, all commands not
* recognized by boardctl() will be forwarded to the board-provided
* board_ioctl() function.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_IOCTL
int board_ioctl(unsigned int cmd, uintptr_t arg);
#endif
/****************************************************************************
* Name: board_lcd_initialize, board_lcd_getdev, board_lcd_uninitialize
*
* Description:
* If an architecture supports a parallel or serial LCD, then it must
* provide APIs to access the LCD as follows:
*
* board_lcd_initialize - Initialize the LCD video hardware. The initial
* state of the LCD is fully initialized, display
* memory cleared, and the LCD ready to use, but
* with the power setting at 0 (full off).
* board_lcd_getdev - Return a a reference to the LCD object for
* the specified LCD. This allows support for
* multiple LCD devices.
* board_lcd_uninitialize - Uninitialize the LCD support
*
* Alternatively, board_graphics_setup() may be used if external graphics
* initialization is configured.
*
****************************************************************************/
#ifdef CONFIG_LCD
struct lcd_dev_s; /* Forward reference */
int board_lcd_initialize(void);
FAR struct lcd_dev_s *board_lcd_getdev(int lcddev);
void board_lcd_uninitialize(void);
#endif
/****************************************************************************
* Name: board_autoled_initialize
*
* Description:
* This function is called very early in initialization to perform board-
* specific initialization of LED-related resources. This includes such
* things as, for example, configure GPIO pins to drive the LEDs and also
* putting the LEDs in their correct initial state.
*
* NOTE: In most architectures, board_autoled_initialize() is called from
* board-specific initialization logic. But there are a few architectures
* where this initialization function is still called from common chip
* architecture logic. This interface is not, however, a common board
* interface in any event and, hence, the usage of the name
* board_autoled_initialize is deprecated.
*
* WARNING: This interface name will eventually be removed; do not use it
* in new board ports. New implementations should use the naming
* conventions for "Microprocessor-Specific Interfaces" or the "Board-
* Specific Interfaces" as described above.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void board_autoled_initialize(void);
#else
# define board_autoled_initialize()
#endif
/****************************************************************************
* Name: board_autoled_on
*
* Description:
* Set the LED configuration into the ON condition for the state provided
* by the led parameter. This may be one of:
*
* LED_STARTED NuttX has been started
* LED_HEAPALLOCATE Heap has been allocated
* LED_IRQSENABLED Interrupts enabled
* LED_STACKCREATED Idle stack created
* LED_INIRQ In an interrupt
* LED_SIGNAL In a signal handler
* LED_ASSERTION An assertion failed
* LED_PANIC The system has crashed
* LED_IDLE MCU is in sleep mode
*
* Where these values are defined in a board-specific way in the standard
* board.h header file exported by every architecture.
*
* Input Parameters:
* led - Identifies the LED state to put in the ON state (which may or may
* not equate to turning an LED on)
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void board_autoled_on(int led);
#else
# define board_autoled_on(led)
#endif
/****************************************************************************
* Name: board_autoled_off
*
* Description:
* Set the LED configuration into the OFF condition for the state provided
* by the led parameter. This may be one of:
*
* LED_INIRQ Leaving an interrupt
* LED_SIGNAL Leaving a signal handler
* LED_ASSERTION Recovering from an assertion failure
* LED_PANIC The system has crashed (blinking).
* LED_IDLE MCU is not in sleep mode
*
* Where these values are defined in a board-specific way in the standard
* board.h header file exported by every architecture.
*
* Input Parameters:
* led - Identifies the LED state to put in the OFF state (which may or may
* not equate to turning an LED off)
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void board_autoled_off(int led);
#else
# define board_autoled_off(led)
#endif
/****************************************************************************
* Name: board_userled_initialize
*
* Description:
* This function may called from application-specific logic during its
* to perform board-specific initialization of LED resources. This
* includes such things as, for example, configure GPIO pins to drive the
* LEDs and also putting the LEDs in their correct initial state.
*
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
* LEDs. If CONFIG_ARCH_LEDS is not defined, then this interfaces may be
* available to control the LEDs directly from user board logic or
* indirectly user applications (via the common LED character driver).
*
* Most boards have only a few LEDs and in those cases all LEDs may be
* used by the NuttX LED logic exclusively and may not be available for
* use by user logic if CONFIG_ARCH_LEDS=y.
*
* NOTE: The LED number is returned.
*
****************************************************************************/
#ifdef CONFIG_ARCH_HAVE_LEDS
uint32_t board_userled_initialize(void);
#endif
/****************************************************************************
* Name: board_userled
*
* Description:
* This interface may be used by application specific logic to set the
* state of a single LED. Definitions for the led identification are
* provided in the board-specific board.h header file that may be included
* like:
*
* #included <arch/board/board.h>
*
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
* LEDs. If CONFIG_ARCH_LEDS is not defined, then this interfaces may be
* available to control the LEDs directly from user board logic or
* indirectly user applications (via the common LED character driver).
*
* Most boards have only a few LEDs and in those cases all LEDs may be
* used by the NuttX LED logic exclusively and may not be available for
* use by user logic if CONFIG_ARCH_LEDS=y.
*
****************************************************************************/
#ifdef CONFIG_ARCH_HAVE_LEDS
void board_userled(int led, bool ledon);
#endif
/****************************************************************************
* Name: board_userled_all
*
* Description:
* This interface may be used by application specific logic to set the
* state of all board LED. Definitions for the led set member
* identification is provided in the board-specific board.h header file
* that may be includedlike:
*
* #included <arch/board/board.h>
*
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
* LEDs. If CONFIG_ARCH_LEDS is not defined, then this interfaces may be
* available to control the LEDs directly from user board logic or
* indirectly user applications (via the common LED character driver).
*
* Most boards have only a few LEDs and in those cases all LEDs may be
* used by the NuttX LED logic exclusively and may not be available for
* use by user logic if CONFIG_ARCH_LEDS=y.
*
****************************************************************************/
#ifdef CONFIG_ARCH_HAVE_LEDS
void board_userled_all(uint32_t ledset);
#endif
/****************************************************************************
* Name: board_userled_getall
*
* Description:
* This interface may be used by application specific logic to read the
* state of all board LEDs. Definitions for the led set member
* identification is provided in the board-specific board.h header file
* that may be included like:
*
* #included <arch/board/board.h>
*
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
* LEDs. If CONFIG_ARCH_LEDS is not defined, then this interfaces may be
* available to check the LEDs directly from user board logic or indirectly
* user applications (via the common LED character driver).
*
****************************************************************************/
#if defined(CONFIG_ARCH_HAVE_LEDS) && defined(CONFIG_USERLED_LOWER_READSTATE)
void board_userled_getall(uint32_t *ledset);
#endif
/****************************************************************************
* Name: board_button_initialize
*
* Description:
* board_button_initialize() must be called to initialize button resources.
* After that, board_buttons() may be called to collect the current state
* of all buttons or board_button_irq() may be called to register button
* interrupt handlers.
*
* NOTE: This interface may or may not be supported by board-specific
* logic. If the board supports button interfaces, then CONFIG_ARCH_BUTTONS
* will be defined.
* NOTE: The button number is returned.
*
****************************************************************************/
#ifdef CONFIG_ARCH_BUTTONS
uint32_t board_button_initialize(void);
#endif
/****************************************************************************
* Name: board_buttons
*
* Description:
* After board_button_initialize() has been called, board_buttons() may be
* called to collect the state of all buttons. board_buttons() returns an
* 32-bit bit set with each bit associated with a button. A bit set to
* "1" means that the button is depressed; a bit set to "0" means that
* the button is released. The correspondence of the each button bit
* and physical buttons is board-specific.
*
* NOTE: This interface may or may not be supported by board-specific
* logic. If the board supports button interfaces, then
* CONFIG_ARCH_BUTTONS will be defined
*
****************************************************************************/
#ifdef CONFIG_ARCH_BUTTONS
uint32_t board_buttons(void);
#endif
/****************************************************************************
* Name: board_button_irq
*
* Description:
* This function may be called to register an interrupt handler that will
* be called when a button is depressed or released. The ID value is a
* button enumeration value that uniquely identifies a button resource.
*
* NOTE: This interface may or may not be supported by board-specific
* logic. If the board supports any button interfaces, then
* CONFIG_ARCH_BUTTONS will be defined; If the board supports interrupt
* buttons, then CONFIG_ARCH_IRQBUTTONS will also be defined.
*
****************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg);
#endif
/****************************************************************************
* Name: board_crashdump
*
* Description:
* If CONFIG_BOARD_CRASHDUMP is selected then up_asseert will call out to
* board_crashdump prior to calling exit in the case of an assertion
* failure. Or in the case of a hardfault looping indefinitely.
* board_crashdump then has a chance to save the state of the machine.
* The provided board_crashdump should save as much information as it can
* about the cause of the fault and then most likely reset the system.
*
* N.B. There are limited system resources that can be used by the provided
* board_crashdump. The tems from the fact that most critical/fatal
* crashes are because of a hard fault or during interrupt processing.
* In these cases, up_assert is running from the context of an interrupt
* handlerand it is impossible to use any device driver in this context.
*
* Also consider the following: Who knows what state the system is in? Is
* memory trashed? Is the Heap intact? Therefore all we can expect to do in
* board_crashdump is save the "machine state" in a place where on the next
* reset we can write it to more sophisticated storage in a sane operating
* environment.
*
****************************************************************************/
#ifdef CONFIG_BOARD_CRASHDUMP
struct tcb_s;
void board_crashdump(uintptr_t sp, FAR struct tcb_s *tcb,
FAR const char *filename, int lineno,
FAR const char *msg, FAR void *regs);
#endif
/****************************************************************************
* Name: board_init_rngseed
*
* Description:
* If CONFIG_BOARD_INITRNGSEED is selected then board_init_rngseed is
* called at up_randompool_initialize() to feed initial random seed
* to RNG. Implementation of this functions should feed at least
* MIN_SEED_NEW_ENTROPY_WORDS 32-bit random words to entropy-pool using
* up_rngaddentropy() or up_rngaddint().
*
****************************************************************************/
#ifdef CONFIG_BOARD_INITRNGSEED
void board_init_rngseed(void);
#endif
/****************************************************************************
* Name: board_reset_cause
*
* Description:
* This interface may be used by application specific logic to get the
* cause of last reset. Support for this function is required by
* board-level logic if CONFIG_BOARDCTL_RESET is selected.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_RESET_CAUSE
int board_reset_cause(FAR struct boardioc_reset_cause_s *cause);
#endif
/****************************************************************************
* Name: board_start_cpu
*
* Description:
* This interface may be used by application specific logic to start
* specified slave cpu core under the pseudo AMP case which is different
* with armv7-a/armv8-a SMP. Support for this function is required by
* board-level logic if CONFIG_BOARDCTL_START_CPU is selected.
*
****************************************************************************/
#ifdef CONFIG_BOARDCTL_START_CPU
int board_start_cpu(int cpuid);
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __INCLUDE_NUTTX_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink