incubator-nuttx/boards/arm/rp2040/adafruit-kb2040/configs/usbmsc/defconfig

73 lines
1.9 KiB
Plaintext

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_LIBC_LONG_LONG is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_DISABLE_DATE is not set
# CONFIG_NSH_DISABLE_LOSMART is not set
# CONFIG_SPI_CALLBACK is not set
# CONFIG_STANDARD_SERIAL is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="adafruit-kb2040"
CONFIG_ARCH_BOARD_ADAFRUIT_KB2040=y
CONFIG_ARCH_CHIP="rp2040"
CONFIG_ARCH_CHIP_RP2040=y
CONFIG_ARCH_RAMVECTORS=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_LOOPSPERMSEC=10450
CONFIG_BUILTIN=y
CONFIG_CDCACM=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DISABLE_POSIX_TIMERS=y
CONFIG_EXAMPLES_HELLO=y
CONFIG_EXAMPLES_USBSERIAL=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_MMCSD=y
CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=6
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_READLINE=y
CONFIG_RAM_SIZE=270336
CONFIG_RAM_START=0x20000000
CONFIG_READLINE_CMD_HISTORY=y
CONFIG_RP2040_BOARD_HAS_WS2812=y
CONFIG_RP2040_SPI0=y
CONFIG_RP2040_SPI0_CS_GPIO=5
CONFIG_RP2040_SPI0_RX_GPIO=4
CONFIG_RP2040_SPI0_SCK_GPIO=6
CONFIG_RP2040_SPI0_TX_GPIO=7
CONFIG_RP2040_SPI=y
CONFIG_RP2040_SPISD=y
CONFIG_RP2040_WS2812_GPIO_PIN=17
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_START_DAY=9
CONFIG_START_MONTH=2
CONFIG_START_YEAR=2021
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_SPITOOL=y
CONFIG_SYSTEM_USBMSC=y
CONFIG_TESTING_GETPRIME=y
CONFIG_TESTING_OSTEST=y
CONFIG_UART0_SERIAL_CONSOLE=y
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBMSC=y
CONFIG_USBMSC_NOT_STALL_BULKEP=y
CONFIG_WS2812=y