53 lines
1.4 KiB
Plaintext
53 lines
1.4 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
|
#
|
|
|
|
if ARCH_BOARD_TEENSY_4X
|
|
choice
|
|
prompt "Boot Flash"
|
|
default TEENSY4_QSPI_FLASH
|
|
|
|
config TEENSY4_QSPI_FLASH
|
|
bool "QSPI Flash"
|
|
|
|
endchoice # Boot Flash
|
|
|
|
choice
|
|
prompt "Board configuration"
|
|
|
|
config TEENSY_40
|
|
bool "Teensy 4.0"
|
|
|
|
config TEENSY_41
|
|
bool "Teensy 4.1"
|
|
|
|
endchoice # Board configuration
|
|
|
|
config IMXRT_FLEXCAN3_AS_CAN0
|
|
bool "Initialize CAN3 bus as can0"
|
|
---help---
|
|
This configuration option ensures that if more that one CAN bus is set on
|
|
that CAN 3 (with FD capability) will be initialized as can0.
|
|
|
|
config NET_USE_OTP_ETHERNET_MAC
|
|
bool "Use Ethernet MAC address stored in OCOTP_MAC0 and OCOTP_MAC1"
|
|
---help---
|
|
The teensy 4.1 board has an "offical" unique MAC address stored in OCOTP (One-Time-Programmable) memory.
|
|
When enabling this option, it is read and used when the ethernet peripheral is initialized.
|
|
If so, the 'ifconfig eth0' HWaddr should start with 04:e9:e5:...
|
|
(the vendor ID of 'PJRC.COM, LLC') when this feature is enabled.
|
|
It may also be used with other boards that have the OCOTP programmed with a valid MAC.
|
|
|
|
if TEENSY_41
|
|
|
|
config TEENSY_41_PIKRON_BB
|
|
bool "Base board for Teensy 4.1 configuration"
|
|
---help---
|
|
Configuration pikron-bb contains setup for open hardware based board fo Teensy 4.1. This option
|
|
sets up HW pinout as ADC channels for example.
|
|
|
|
endif
|
|
|
|
endif
|