incubator-nuttx/include/nuttx/sched_note.h

393 lines
12 KiB
C

/****************************************************************************
* include/nuttx/sched_note.h
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_SCHED_NOTE_H
#define __INCLUDE_NUTTX_SCHED_NOTE_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/sched.h>
#ifdef CONFIG_SCHED_INSTRUMENTATION
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Provide defaults for some configuration settings (could be undefined with
* old configuration files)
*/
#ifndef CONFIG_SCHED_INSTRUMENTATION_CPUSET
# define CONFIG_SCHED_INSTRUMENTATION_CPUSET 0xffff
#endif
#ifndef CONFIG_SCHED_NOTE_BUFSIZE
# define CONFIG_SCHED_NOTE_BUFSIZE 2048
#endif
/****************************************************************************
* Public Types
****************************************************************************/
#ifdef CONFIG_SCHED_INSTRUMENTATION_BUFFER
/* This type identifies a note structure */
enum note_type_e
{
NOTE_START = 0,
NOTE_STOP = 1,
NOTE_SUSPEND = 2,
NOTE_RESUME = 3
#ifdef CONFIG_SMP
,
NOTE_CPU_START = 4,
NOTE_CPU_STARTED = 5,
NOTE_CPU_PAUSE = 6,
NOTE_CPU_PAUSED = 7,
NOTE_CPU_RESUME = 8,
NOTE_CPU_RESUMED = 9
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_PREEMPTION
,
NOTE_PREEMPT_LOCK = 10,
NOTE_PREEMPT_UNLOCK = 11
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_CSECTION
,
NOTE_CSECTION_ENTER = 12,
NOTE_CSECTION_LEAVE = 13
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_SPINLOCKS
,
NOTE_SPINLOCK_LOCK = 14,
NOTE_SPINLOCK_LOCKED = 15,
NOTE_SPINLOCK_UNLOCK = 16,
NOTE_SPINLOCK_ABORT = 17
#endif
};
/* This structure provides the common header of each note */
struct note_common_s
{
uint8_t nc_length; /* Length of the note */
uint8_t nc_type; /* See enum note_type_e */
uint8_t nc_priority; /* Thread/task priority */
#ifdef CONFIG_SMP
uint8_t nc_cpu; /* CPU thread/task running on */
#endif
uint8_t nc_pid[2]; /* ID of the thread/task */
uint8_t nc_systime[4]; /* Time when note was buffered */
};
/* This is the specific form of the NOTE_START note */
struct note_start_s
{
struct note_common_s nst_cmn; /* Common note parameters */
#if CONFIG_TASK_NAME_SIZE > 0
char nst_name[1]; /* Start of the name of the thread/task */
#endif
};
/* This is the specific form of the NOTE_STOP note */
struct note_stop_s
{
struct note_common_s nsp_cmn; /* Common note parameters */
};
/* This is the specific form of the NOTE_SUSPEND note */
struct note_suspend_s
{
struct note_common_s nsu_cmn; /* Common note parameters */
uint8_t nsu_state; /* Task state */
};
/* This is the specific form of the NOTE_RESUME note */
struct note_resume_s
{
struct note_common_s nre_cmn; /* Common note parameters */
};
#ifdef CONFIG_SMP
/* This is the specific form of the NOTE_CPU_START note */
struct note_cpu_start_s
{
struct note_common_s ncs_cmn; /* Common note parameters */
uint8_t ncs_target; /* CPU being started */
};
/* This is the specific form of the NOTE_CPU_STARTED note */
struct note_cpu_started_s
{
struct note_common_s ncs_cmn; /* Common note parameters */
};
/* This is the specific form of the NOTE_CPU_PAUSE note */
struct note_cpu_pause_s
{
struct note_common_s ncp_cmn; /* Common note parameters */
uint8_t ncp_target; /* CPU being paused */
};
/* This is the specific form of the NOTE_CPU_PAUSED note */
struct note_cpu_paused_s
{
struct note_common_s ncp_cmn; /* Common note parameters */
};
/* This is the specific form of the NOTE_CPU_RESUME note */
struct note_cpu_resume_s
{
struct note_common_s ncr_cmn; /* Common note parameters */
uint8_t ncr_target; /* CPU being resumed */
};
/* This is the specific form of the NOTE_CPU_RESUMED note */
struct note_cpu_resumed_s
{
struct note_common_s ncr_cmn; /* Common note parameters */
};
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_PREEMPTION
/* This is the specific form of the NOTE_PREEMPT_LOCK/UNLOCK note */
struct note_preempt_s
{
struct note_common_s npr_cmn; /* Common note parameters */
uint8_t npr_count[2]; /* Count of nested locks */
};
#endif /* CONFIG_SCHED_INSTRUMENTATION_PREEMPTION */
#ifdef CONFIG_SCHED_INSTRUMENTATION_CSECTION
/* This is the specific form of the NOTE_CSECTION_ENTER/LEAVE note */
struct note_csection_s
{
struct note_common_s ncs_cmn; /* Common note parameters */
#ifdef CONFIG_SMP
uint8_t ncs_count[2]; /* Count of nested csections */
#endif
};
#endif /* CONFIG_SCHED_INSTRUMENTATION_CSECTION */
#ifdef CONFIG_SCHED_INSTRUMENTATION_SPINLOCKS
/* This is the specific form of the NOTE_SPINLOCK_LOCK/LOCKED/UNLOCK/ABORT note */
struct note_spinlock_s
{
struct note_common_s nsp_cmn; /* Common note parameters */
FAR void *nsp_spinlock; /* Address of spinlock */
uint8_t nsp_value; /* Value of spinlock */
};
#endif /* CONFIG_SCHED_INSTRUMENTATION_SPINLOCKS */
#endif /* CONFIG_SCHED_INSTRUMENTATION_BUFFER */
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/********************************************************************************
* Name: sched_note_*
*
* Description:
* If instrumentation of the scheduler is enabled, then some outboard logic
* must provide the following interfaces. These interfaces are not available
* to application code.
*
* NOTE: if CONFIG_SCHED_INSTRUMENTATION_BUFFER, then these interfaces are
* *not* available to the platform-specific logic. Rather, they provided by
* the note buffering logic. See sched_note_get() below.
*
* Input Parameters:
* tcb - The TCB of the thread.
*
* Returned Value:
* None
*
********************************************************************************/
void sched_note_start(FAR struct tcb_s *tcb);
void sched_note_stop(FAR struct tcb_s *tcb);
void sched_note_suspend(FAR struct tcb_s *tcb);
void sched_note_resume(FAR struct tcb_s *tcb);
#ifdef CONFIG_SMP
void sched_note_cpu_start(FAR struct tcb_s *tcb, int cpu);
void sched_note_cpu_started(FAR struct tcb_s *tcb);
void sched_note_cpu_pause(FAR struct tcb_s *tcb, int cpu);
void sched_note_cpu_paused(FAR struct tcb_s *tcb);
void sched_note_cpu_resume(FAR struct tcb_s *tcb, int cpu);
void sched_note_cpu_resumed(FAR struct tcb_s *tcb);
#else
# define sched_note_cpu_start(t,c)
# define sched_note_cpu_started(t)
# define sched_note_cpu_pause(t,c)
# define sched_note_cpu_paused(t)
# define sched_note_cpu_resume(t,c)
# define sched_note_cpu_resumed(t)
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_PREEMPTION
void sched_note_premption(FAR struct tcb_s *tcb, bool locked);
#else
# define sched_note_premption(t,l)
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_CSECTION
void sched_note_csection(FAR struct tcb_s *tcb, bool enter);
#else
# define sched_note_csection(t,e)
#endif
#ifdef CONFIG_SCHED_INSTRUMENTATION_SPINLOCKS
void sched_note_spinlock(FAR struct tcb_s *tcb, FAR volatile void *spinlock);
void sched_note_spinlocked(FAR struct tcb_s *tcb, FAR volatile void *spinlock);
void sched_note_spinunlock(FAR struct tcb_s *tcb, FAR volatile void *spinlock);
void sched_note_spinabort(FAR struct tcb_s *tcb, FAR volatile void *spinlock);
#else
# define sched_note_spinlock(t,s)
# define sched_note_spinlocked(t,s)
# define sched_note_spinunlock(t,s)
# define sched_note_spinabort(t,s)
#endif
/****************************************************************************
* Name: sched_note_get
*
* Description:
* Remove the next note from the tail of the circular buffer. The note
* is also removed from the circular buffer to make room for further notes.
*
* Input Parameters:
* buffer - Location to return the next note
* buflen - The length of the user provided buffer.
*
* Returned Value:
* On success, the positive, non-zero length of the return note is
* provided. Zero is returned only if the circular buffer is empty. A
* negated errno value is returned in the event of any failure.
*
****************************************************************************/
#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
defined(CONFIG_SCHED_NOTE_GET)
ssize_t sched_note_get(FAR uint8_t *buffer, size_t buflen);
#endif
/****************************************************************************
* Name: sched_note_size
*
* Description:
* Return the size of the next note at the tail of the circular buffer.
*
* Input Parameters:
* None.
*
* Returned Value:
* Zero is returned if the circular buffer is empty. Otherwise, the size
* of the next note is returned.
*
****************************************************************************/
#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
defined(CONFIG_SCHED_NOTE_GET)
ssize_t sched_note_size(void);
#endif
/****************************************************************************
* Name: note_register
*
* Description:
* Register a serial driver at /dev/note that can be used by an
* application to read data from the circular not buffer.
*
* Input Parameters:
* None.
*
* Returned Value:
* Zero is returned if the circular buffer is empty. Otherwise, a negated
* errno value is returned.
*
****************************************************************************/
#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
defined(CONFIG_DRIVER_NOTE)
int note_register(void);
#endif
#else /* CONFIG_SCHED_INSTRUMENTATION */
# define sched_note_start(t)
# define sched_note_stop(t)
# define sched_note_suspend(t)
# define sched_note_resume(t)
# define sched_note_cpu_start(t,c)
# define sched_note_cpu_started(t)
# define sched_note_cpu_pause(t,c)
# define sched_note_cpu_paused(t)
# define sched_note_cpu_resume(t,c)
# define sched_note_cpu_resumed(t)
# define sched_note_premption(t,l)
# define sched_note_csection(t,e)
# define sched_note_spinlock(t,s)
# define sched_note_spinlocked(t,s)
# define sched_note_spinunlock(t,s)
# define sched_note_spinabort(t,s)
#endif /* CONFIG_SCHED_INSTRUMENTATION */
#endif /* __INCLUDE_NUTTX_SCHED_NOTE_H */