224 lines
7.8 KiB
C
224 lines
7.8 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32f7/steval-eth001v1/include/board.h
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STM32F7_STEVAL_ETH001V1_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_STM32F7_STEVAL_ETH001V1_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* HSI: 16 MHz RC factory-trimmed
|
|
* LSI: 32 KHz RC
|
|
* HSE: On-board crystal frequency is 26MHz
|
|
* LSE: 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 26000000ul
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul
|
|
#define STM32_LSI_FREQUENCY 32000
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768
|
|
|
|
/* Main PLL Configuration.
|
|
*
|
|
* PLL source is HSE = 26,000,000
|
|
*
|
|
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
|
* Subject to:
|
|
*
|
|
* 2 <= PLLM <= 63
|
|
* 192 <= PLLN <= 432
|
|
* 192 MHz <= PLL_VCO <= 432MHz
|
|
*
|
|
* SYSCLK = PLL_VCO / PLLP
|
|
* Subject to
|
|
*
|
|
* PLLP = {2, 4, 6, 8}
|
|
* SYSCLK <= 216 MHz
|
|
*
|
|
* USB OTG FS, SDMMC and RNG Clock = PLL_VCO / PLLQ
|
|
* Subject to
|
|
* The USB OTG FS requires a 48 MHz clock to work correctly. The SDMMC
|
|
* and the random number generator need a frequency lower than or equal
|
|
* to 48 MHz to work correctly.
|
|
*
|
|
* 2 <= PLLQ <= 15
|
|
*/
|
|
|
|
/* Highest SYSCLK
|
|
*
|
|
* PLL_VCO = (26,000,000 / 26) * 432 = 432 MHz
|
|
* SYSCLK = 432 MHz / 2 = 216 MHz
|
|
*/
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(26)
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432)
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(10)
|
|
|
|
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 26) * 432)
|
|
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
|
|
|
/* Configure Dedicated Clock Configuration Register */
|
|
|
|
#define STM32_RCC_DCKCFGR1_PLLI2SDIVQ RCC_DCKCFGR1_PLLI2SDIVQ(0)
|
|
#define STM32_RCC_DCKCFGR1_PLLSAIDIVQ RCC_DCKCFGR1_PLLSAIDIVQ(0)
|
|
#define STM32_RCC_DCKCFGR1_PLLSAIDIVR RCC_DCKCFGR1_PLLSAIDIVR(1)
|
|
#define STM32_RCC_DCKCFGR1_SAI1SRC 0
|
|
#define STM32_RCC_DCKCFGR1_SAI2SRC 0
|
|
#define STM32_RCC_DCKCFGR1_TIMPRESRC 0
|
|
#define STM32_RCC_DCKCFGR1_DFSDM1SRC 0
|
|
#define STM32_RCC_DCKCFGR1_ADFSDM1SRC 0
|
|
|
|
/* Configure Dedicated Clock Configuration Register 2 */
|
|
|
|
#define STM32_RCC_DCKCFGR2_USART1SRC RCC_DCKCFGR2_USART1SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_USART2SRC RCC_DCKCFGR2_USART2SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART4SRC RCC_DCKCFGR2_UART4SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART5SRC RCC_DCKCFGR2_UART5SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_USART6SRC RCC_DCKCFGR2_USART6SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART7SRC RCC_DCKCFGR2_UART7SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART8SRC RCC_DCKCFGR2_UART8SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_I2C1SRC RCC_DCKCFGR2_I2C1SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_I2C2SRC RCC_DCKCFGR2_I2C2SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_I2C3SRC RCC_DCKCFGR2_I2C3SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_I2C4SRC RCC_DCKCFGR2_I2C4SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_LPTIM1SRC RCC_DCKCFGR2_LPTIM1SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_CECSRC RCC_DCKCFGR2_CECSEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_CK48MSRC RCC_DCKCFGR2_CK48MSEL_PLLSAI
|
|
#define STM32_RCC_DCKCFGR2_SDMMCSRC RCC_DCKCFGR2_SDMMCSEL_48MHZ
|
|
#define STM32_RCC_DCKCFGR2_SDMMC2SRC RCC_DCKCFGR2_SDMMC2SEL_48MHZ
|
|
|
|
/* Several prescalers allow the configuration of the two AHB buses, the
|
|
* high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
|
|
* frequency of the two AHB buses is 216 MHz while the maximum frequency of
|
|
* the high-speed APB domains is 108 MHz. The maximum allowed frequency of
|
|
* the low-speed APB domain is 54 MHz.
|
|
*/
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (216 MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
|
|
|
/* Timers driven from APB1 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* Timers driven from APB2 will be twice PCLK2 */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
/* FLASH wait states
|
|
*
|
|
* --------- ---------- -----------
|
|
* VDD MAX SYSCLK WAIT STATES
|
|
* --------- ---------- -----------
|
|
* 1.7-2.1 V 180 MHz 8
|
|
* 2.1-2.4 V 216 MHz 9
|
|
* 2.4-2.7 V 216 MHz 8
|
|
* 2.7-3.6 V 216 MHz 7
|
|
* --------- ---------- -----------
|
|
*/
|
|
|
|
#define BOARD_FLASH_WAITSTATES 7
|
|
|
|
/* DMA Channel/Stream Selections ********************************************/
|
|
|
|
/* ADC 1 */
|
|
|
|
#define ADC1_DMA_CHAN DMAMAP_ADC1_1
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
|
|
/* USART3
|
|
* TX - PB10
|
|
* RX - PB11
|
|
*/
|
|
|
|
#define GPIO_USART3_RX GPIO_USART3_RX_1 /* PB11 */
|
|
#define GPIO_USART3_TX GPIO_USART3_TX_1 /* PB10 */
|
|
|
|
/* USART6 (RS485)
|
|
* TX - PG14
|
|
* RX - PG9
|
|
* RTS - PG12
|
|
* CK - PC8
|
|
*/
|
|
|
|
#define GPIO_USART6_TX GPIO_USART6_TX_2 /* PG14 */
|
|
#define GPIO_USART6_RX GPIO_USART6_RX_2 /* PG9 */
|
|
#define GPIO_USART6_RTS GPIO_USART6_RTS_1 /* PG12 */
|
|
#define GPIO_USART6_CK GPIO_USART6_CK_1 /* PC8 */
|
|
|
|
/* PWM1 - FOC */
|
|
|
|
#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1 /* PA8 */
|
|
#define GPIO_TIM1_CH1NOUT GPIO_TIM1_CH1NOUT_2 /* PB13 */
|
|
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_1 /* PA9 */
|
|
#define GPIO_TIM1_CH2NOUT GPIO_TIM1_CH2NOUT_1 /* PB0 */
|
|
#define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_1 /* PA10 */
|
|
#define GPIO_TIM1_CH3NOUT GPIO_TIM1_CH3NOUT_1 /* PB1 */
|
|
#define GPIO_TIM1_CH4OUT 0 /* not used as output */
|
|
|
|
/* TIM2 - QENCO */
|
|
|
|
#define GPIO_TIM2_CH1IN GPIO_TIM2_CH1IN_1 /* PA0 */
|
|
#define GPIO_TIM2_CH2IN GPIO_TIM2_CH2IN_1 /* PA1 */
|
|
#define GPIO_TIM2_CH3IN GPIO_TIM2_CH3IN_1 /* PA2 */
|
|
|
|
#endif /* __BOARDS_ARM_STM32F7_STEVAL_ETH001V1_INCLUDE_BOARD_H */
|