incubator-nuttx/net/ieee802154/ieee802154.h

460 lines
16 KiB
C

/****************************************************************************
* net/ieee802154/ieee802154.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __NET_IEEE802154_IEEE802154_H
#define __NET_IEEE802154_IEEE802154_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <netpacket/ieee802154.h>
#include <nuttx/net/net.h>
#ifdef CONFIG_NET_IEEE802154
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Allocate a new IEEE 802.15.4 socket data callback */
#define ieee802154_callback_alloc(dev,conn) \
devif_callback_alloc(dev, &conn->sconn.list, &conn->sconn.list_tail)
#define ieee802154_callback_free(dev,conn,cb) \
devif_conn_callback_free(dev, cb, &conn->sconn.list, &conn->sconn.list_tail)
/* Memory Pools */
#define IEEE802154_POOL_PREALLOCATED 0
#define IEEE802154_POOL_DYNAMIC 1
/* Frame size */
/* This maximum size of an IEEE 802.15.4 frame. Certain, non-standard
* devices may exceed this value, however.
*/
#define IEEE802154_MAC_STDFRAME 127
/* Space for a two byte FCS must be reserved at the end of the frame */
#define IEEE802154_MAC_FCSSIZE 2
/* This, then, is the usable size of the frame... */
#if defined(CONFIG_NET_IEEE802154_FRAMELEN)
# define IEEE802_MAX_FRAMELEN CONFIG_NET_IEEE802154_FRAMELEN
#else
# define IEEE802_MAX_FRAMELEN IEEE802154_MAC_STDFRAME
#endif
#define IEEE802154_FRAMELEN (IEEE802_MAX_FRAMELEN - IEEE802154_MAC_FCSSIZE)
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/* Used for containing and queuing IOBs along with information about the
* source of the frame.
*/
struct iob_s; /* Forward reference */
struct ieee802154_container_s
{
FAR struct ieee802154_container_s *ic_flink; /* Supports a singly linked list */
struct ieee802154_saddr_s ic_src; /* Source of the packet */
FAR struct iob_s *ic_iob; /* Contained IOB */
uint8_t ic_pool; /* See IEEE802154_POOL_* definitions */
};
/* Representation of a IEEE 802.15.4 socket connection */
struct devif_callback_s; /* Forward reference */
struct ieee802154_conn_s
{
/* Common prologue of all connection structures. */
struct socket_conn_s sconn;
/* IEEE 802.15.4-specific content follows */
struct ieee802154_saddr_s laddr; /* Locally bound / source address */
struct ieee802154_saddr_s raddr; /* Connected remote address */
uint8_t crefs; /* Reference counts on this instance */
#if CONFIG_NET_IEEE802154_BACKLOG > 0
uint8_t backlog; /* Number of frames in RX queue */
#endif
/* Queue of incoming packets */
FAR struct ieee802154_container_s *rxhead;
FAR struct ieee802154_container_s *rxtail;
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
# define EXTERN extern "C"
extern "C"
{
#else
# define EXTERN extern
#endif
/* The IEEE 802.15.4 socket interface */
EXTERN const struct sock_intf_s g_ieee802154_sockif;
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
struct ieee802154_data_ind_s; /* Forward reference */
struct radio_driver_s; /* Forward reference */
struct net_driver_s; /* Forward reference */
struct socket; /* Forward reference */
struct sockaddr; /* Forward reference */
/****************************************************************************
* Name: ieee802154_initialize()
*
* Description:
* Initialize the IEEE 802.15.4 socket support. Called once and only
* from the network initialization logic.
*
* Assumptions:
* Called early in the initialization sequence
*
****************************************************************************/
void ieee802154_initialize(void);
/****************************************************************************
* Name: ieee802154_conn_initialize
*
* Description:
* Initialize the IEEE 802.15.4 connection structure allocator. Called
* once and only from ieee802154_initialize().
*
* Assumptions:
* Called early in the initialization sequence
*
****************************************************************************/
void ieee802154_conn_initialize(void);
/****************************************************************************
* Name: ieee802154_conn_alloc()
*
* Description:
* Allocate a new, uninitialized IEEE 802.15.4 socket connection
* structure. This is normally something done by the implementation of
* the socket() API
*
****************************************************************************/
FAR struct ieee802154_conn_s *ieee802154_conn_alloc(void);
/****************************************************************************
* Name: ieee802154_conn_free()
*
* Description:
* Free a IEEE 802.15.4 socket connection structure that is no longer in
* use. This should be done by the implementation of close().
*
****************************************************************************/
void ieee802154_conn_free(FAR struct ieee802154_conn_s *conn);
/****************************************************************************
* Name: ieee802154_conn_active()
*
* Description:
* Find a connection structure that is the appropriate
* connection to be used with the provided Ethernet header
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
FAR struct ieee802154_conn_s *
ieee802154_conn_active(FAR const struct ieee802154_data_ind_s *meta);
/****************************************************************************
* Name: ieee802154_conn_next()
*
* Description:
* Traverse the list of allocated IEEE 802.15.4 connections
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
FAR struct ieee802154_conn_s *
ieee802154_conn_next(FAR struct ieee802154_conn_s *conn);
/****************************************************************************
* Name: ieee802154_input
*
* Description:
* Handle incoming IEEE 802.15.4 input
*
* This function is called when the radio device driver has received an
* frame from the network. The frame from the device driver must be
* provided in by the IOB frame argument of the function call:
*
* - The frame data is in the IOB io_data[] buffer,
* - The length of the frame is in the IOB io_len field, and
* - The offset past and radio MAC header is provided in the io_offset
* field.
*
* The frame argument may refer to a single frame (a list of length one)
* or may it be the head of a list of multiple frames.
*
* - The io_flink field points to the next frame in the list (if enable)
* - The last frame in the list will have io_flink == NULL.
*
* Input Parameters:
* radio The radio network driver interface.
* framelist - The head of an incoming list of frames. Normally this
* would be a single frame. A list may be provided if
* appropriate, however.
* meta - Meta data characterizing the received frame.
*
* If there are multilple frames in the list, this metadata
* must apply to all of the frames in the list.
*
* Returned Value:
* OK The IEEE 802.15.4 has been processed and can be deleted
* ERROR Hold the IEEE 802.15.4 and try again later. There is a listening
* socket but no recv in place to catch the IEEE 802.15.4 yet.
* Useful when a packet arrives before a recv call is in place.
*
* Assumptions:
* Called from the network diver with the network locked.
*
****************************************************************************/
/* ieee802154_input() is prototyped in include/nuttx/net/ieee802154.h */
/****************************************************************************
* Name: ieee802154_callback
*
* Description:
* Inform the application holding the IEEE 802.15.4 socket of a change in
* state.
*
* Returned Value:
* OK if IEEE 802.15.4 has been processed, otherwise ERROR.
*
* Assumptions:
* This function is called from network logic at with the network locked.
*
****************************************************************************/
uint16_t ieee802154_callback(FAR struct radio_driver_s *radio,
FAR struct ieee802154_conn_s *conn,
uint16_t flags);
/****************************************************************************
* Name: ieee802154_recvmsg
*
* Description:
* Implements the socket recvfrom interface for the case of the AF_INET
* and AF_INET6 address families. ieee802154_recvmsg() receives messages
* from a socket, and may be used to receive data on a socket whether or
* not it is connection-oriented.
*
* If msg_name is not NULL, and the underlying protocol provides the source
* address, this source address is filled in. The argument 'msg_namelen' is
* initialized to the size of the buffer associated with msg_name, and
* modified on return to indicate the actual size of the address stored
* there.
*
* Input Parameters:
* psock A pointer to a NuttX-specific, internal socket structure
* msg Buffer to receive the message
* flags Receive flags
*
* Returned Value:
* On success, returns the number of characters received. If no data is
* available to be received and the peer has performed an orderly shutdown,
* recvmsg() will return 0. Otherwise, on errors, a negated errno value is
* returned (see recvmsg() for the list of appropriate error values).
*
****************************************************************************/
ssize_t ieee802154_recvmsg(FAR struct socket *psock, FAR struct msghdr *msg,
int flags);
/****************************************************************************
* Name: ieee802154_find_device
*
* Description:
* Select the network driver to use with the IEEE802154 transaction.
*
* Input Parameters:
* conn - IEEE802154 connection structure (not currently used).
* addr - The address to match the devices assigned address
*
* Returned Value:
* A pointer to the network driver to use. NULL is returned on any
* failure.
*
****************************************************************************/
FAR struct radio_driver_s *
ieee802154_find_device(FAR struct ieee802154_conn_s *conn,
FAR const struct ieee802154_saddr_s *addr);
/****************************************************************************
* Name: ieee802154_poll
*
* Description:
* Poll a IEEE 802.15.4 "connection" structure for availability of TX data
*
* Input Parameters:
* dev - The device driver structure to use in the send operation
* conn - The IEEE 802.15.4 "connection" to poll for TX data
*
* Returned Value:
* None
*
* Assumptions:
* Called from the network device interface (devif) with the network
* locked.
*
****************************************************************************/
void ieee802154_poll(FAR struct net_driver_s *dev,
FAR struct ieee802154_conn_s *conn);
/****************************************************************************
* Name: ieee802154_sendmsg
*
* Description:
* If sendmsg() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET)
* socket, the parameters 'msg_name' and 'msg_namelen' are ignored (and the
* error EISCONN may be returned when they are not NULL and 0), and the
* error ENOTCONN is returned when the socket was not actually connected.
*
* Input Parameters:
* psock An instance of the internal socket structure.
* msg Message to send
* flags Send flags
*
* Returned Value:
* On success, returns the number of characters sent. On error, a negated
* errno value is returned (see sendmsg() for the complete list of return
* values.
*
****************************************************************************/
ssize_t ieee802154_sendmsg(FAR struct socket *psock, FAR struct msghdr *msg,
int flags);
/****************************************************************************
* Name: ieee802154_container_initialize
*
* Description:
* This function initializes the container allocator. This function must
* be called early in the initialization sequence before any socket
* activity.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
* Assumptions:
* Called early in the initialization sequence
*
****************************************************************************/
void ieee802154_container_initialize(void);
/****************************************************************************
* Name: ieee802154_container_allocate
*
* Description:
* The ieee802154_container_allocate function will get a free container
* for use by the recvfrom() logic.
*
* This function will first attempt to allocate from the g_free_container
* list. If that the list is empty, then the meta-data structure will be
* allocated from the dynamic memory pool.
*
* Input Parameters:
* None
*
* Returned Value:
* A reference to the allocated container structure. All user fields in
* this structure have been zeroed. On a failure to allocate, NULL is
* returned.
*
* Assumptions:
* The caller has locked the network.
*
****************************************************************************/
FAR struct ieee802154_container_s *ieee802154_container_allocate(void);
/****************************************************************************
* Name: ieee802154_container_free
*
* Description:
* The ieee802154_container_free function will return a container structure
* to the free list of containers if it was a pre-allocated container
* structure. If the container structure was allocated dynamically it will
* be deallocated.
*
* Input Parameters:
* container - container structure to free
*
* Returned Value:
* None
*
* Assumptions:
* The caller has locked the network.
*
****************************************************************************/
void ieee802154_container_free(FAR struct ieee802154_container_s *container);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_NET_IEEE802154 */
#endif /* __NET_IEEE802154_IEEE802154_H */